Items where Subject is "T Technology > TN Mining engineering. Metallurgy"

A

Abdelhafeez Hassan, Ali Mohamed (2017). Burr formation and effects when drilling metallic/composite stack assemblies. University of Birmingham. Ph.D.

Abdul Karem, Waleed (2009). Vibration assisted filling of thin section castings. University of Birmingham. Ph.D.

Al Khateeb, Shadi Mohammad Abdel Kareem (2009). Growth and characterisation of textured superconducting tapes. University of Birmingham. Ph.D.

Al Lafi, Abdul Ghaffar (2009). Cross linked sulphonated poly (ether ether ketone) for the development of polymer electrolyte membrane fuel cell. University of Birmingham. Ph.D.

Alexander, James Edward ORCID: 0000-0002-9242-1683 (2022). Effect of catalytic films on ceramic conversion treatment of titanium alloys for medical devices. University of Birmingham. Ph.D.

Alhuzaim, Abdullah (2021). Microstructural and mechanical properties control during additive manufacturing. University of Birmingham. Ph.D.

Alqattan, Bader Ahmad (2019). Holographic laser ablation for nanopatterning. University of Birmingham. Ph.D.

Anastasiadis, Charalampos (2012). Development of novel alloys for use as hydrogen purification membranes. University of Birmingham. M.Res.

Angelopoulos, Nikolaos (2017). Damage detection and damage evolution monitoring of composite materials for naval applications using acoustic emission testing. University of Birmingham. Ph.D.

Arnold, Robert (2021). A focused study of fundamental & functional materials using beamline techniques to investigate magnetic and crystal structure interactions. University of Birmingham. Ph.D.

Askari Louyeh, Maryam (2017). Silver, magnesium and zinc substituted hydroxyapatite for orthopaedic applications. University of Birmingham. Ph.D.

Attallah, Moataz (2008). Microstructure property development in friction stir welds of aluminim based alloys. University of Birmingham. Ph.D.

Aurora, Friane (2019). Institutional change and resource governance in hydrocarbon and mining industries in Indonesia. University of Birmingham. M.A.

Awais, Muhammad ORCID: 0000-0001-8113-9693 (2022). The extraction of NdFeB magnets from end of life hybrid and electric vehicle scrap and conversion into master alloy and sintered magnets. University of Birmingham. Ph.D.

Awang Kechik, Mohd Mustafa (2011). Improvement of critical current density in YBa2Cu3O7-δ films with nano-inclusions. University of Birmingham. Ph.D.

Azimifar, Seyed Ali (2015). Corrosion of bipolar plates in PEM fuel cells. University of Birmingham. Ph.D.

B

Bagheriasl, Soroosh (2013). Development and characterisation of polyhydroxybutyrate from selected bacterial species. University of Birmingham. Ph.D.

Bai, Yang (2015). Vibrational energy harvesting using piezoelectric ceramics and free-standing thick-film structures. University of Birmingham. Ph.D.

Bailey, Tony (1985). Studies of the magnetic properties and microstructures of two rare earth-transition metal type magnetic alloys. University of Birmingham. Ph.D.

Baker, Ben ORCID: 0000-0001-7618-7148 (2021). Selectively anisotropic continuous fibre ceramic composites via slurry injection. University of Birmingham. Ph.D.

Baker, Sarah (2015). Investigating the process - microstructure - mechanical property development in Ti-6AL-4V friction stir welds. University of Birmingham. Ph.D.

Baker, Scarlett (2011). An investigation into static crack growth and dwell-fatigue in the nickel based superalloy RR1000 at elevated temperatures. University of Birmingham. M.Res.

Baldock, Philip Peter George (2015). The effects of hydrogen ion irradiation on mechanical properties of SiC-based materials using an MC40 cyclotron. University of Birmingham. M.Res.

Bale, Philip (2012). Feeding properties of the highly grain refined A20X alloy. University of Birmingham. M.Res.

Balestra, Eric (2019). Analysis of titanium alloys solidification structures. University of Birmingham. Ph.D.

Ball, James A.D. ORCID: 0000-0001-5830-8268 (2024). Development and application of 3D X-ray diffraction for the study of phase transformations in metallic materials. University of Birmingham. Ph.D.

Bangyikhan, Kittiphan (2005). Effects of oxide film, Fe-rich phase, porosity and their interactions on tensile properties of cast Al-Si-Mg alloys. University of Birmingham. Ph.D.

Bass, Matthew Ian (2018). Steam oxidation of shot peened austenitic stainless steel. University of Birmingham. D.Eng.

Batt, Joanna Mary (2017). The biological effects of titanium corrosion products on gingival epithelium. University of Birmingham. Ph.D.

Bell, Robert (2015). The effect of microwave fields on the interaction of hydrogen with hydride forming materials. University of Birmingham. Eng.D.

Bellefontaine, George (2010). The corrosion of CoCrMo alloys for biomedical applications. University of Birmingham. M.Res.

Bennett, Tom (2015). Modelling of crushing operations in the aggregates industry. University of Birmingham. M.Res.

Beshay, Youssef Kamal (2010). The application of positron emission particle tracking to study non-metallic inclusions in metal castings. University of Birmingham. Ph.D.

Bhogal, Amrita Kaur (2023). The thermal behaviour of polyamide-12 in the powder bed fusion process. University of Birmingham. Ph.D.

Boswell, John Harold (2018). The effects of thermal processing on the microstructure and properties of selectively laser melted CM247LC nickel-base superalloy. University of Birmingham. M.Sc.

Boukhobza, Jonathan (2017). The effects of scratch damage on the fatigue performance of a nickle-based superalloy used for aerospace applications. University of Birmingham. Eng.D.

Brampton, David (2010). Destabilization of lithium borohydride with additions of magnesium hydride. University of Birmingham. M.Res.

Briffa, Amy K.R. (2012). Low temperature magnetic ordering of frustrated rare-earth pyrochlores. University of Birmingham. Ph.D.

Brooks, Oliver Peter (2018). The hydrogen ductilisation process (HyDP) for NdFeB alloys. University of Birmingham. Ph.D.

Buhagiar, Joseph (2008). Plasma surface engineering and characterisation of biomedical stainless steels. University of Birmingham. Ph.D.

Burnard, David John (2015). Positron emission particle tracking of inclusions in cast liquid metals. University of Birmingham. Ph.D.

Burns, Jonathan Mark (2012). Development and characterisation of a fibre-optic acoustic emission sensor. University of Birmingham. Ph.D.

Burrows, Kyle (2013). The effects of acrylic acid on the electro-mechanical behaviour of ITO-coated polymer substrates for flexible display technologies. University of Birmingham. M.Res.

Busuttil, Markus (2014). The influence of glass coating on the forging of nickel-based superalloys. University of Birmingham. Ph.D.

Byczynski, Glenn Edwin (2002). The strength and fatigue performance of 319 aluminum alloy castings. University of Birmingham. Ph.D.

C

Campbell, Alexander Rasul (2019). Investigations into the optimisation of the commercial processing route for Sm\(_2\)Co\(_{17}\) type permanent magnets. University of Birmingham. Ph.D.

Campbell, John (1967). Origin of porosity in cast metals. University of Birmingham. Ph.D.

Carter, Joseph Lewis ORCID: 0000-0001-5647-5214 (2022). Processing optimisation, conductivity enhancement & adhesion improvement of PEDOT:PSS films. University of Birmingham. Ph.D.

Chakrabarti, Debalay (2007). Development of bimodal grain structures and their effect on toughness in HSLA steel. University of Birmingham. Ph.D.

Chard, Alison Elizabeth (2012). Deformation of inclusions in rail steel due to rolling contact. University of Birmingham. M.Res.

Che, Chang ORCID: 0000-0002-8669-8205 (2024). μPlasma surface modification of thermoplastic composites and their ageing behaviour. University of Birmingham. Ph.D.

Chen, Peng ORCID: 0000-0002-7771-7072 (2022). Development of an additive manufacturing processing route for high entropy alloys using powder bed fusion. University of Birmingham. Ph.D.

Chen, Qi (2017). The effect of transition metal additions on double oxide film defects in Al alloy castings. University of Birmingham. Ph.D.

Cheng, Xu (2012). Inert refractory systems for casting of titanium alloys. University of Birmingham. Ph.D.

Clark, Daniel (2012). Net shape engineering for high performance aerospace applications: targeted development of novel technologies for aerospace near net shape combustor module applications. University of Birmingham. Eng.D.

Clift, Sally Elizabeth (1986). Identification of defect locations in forged products using the finite-element method. University of Birmingham. Ph.D.

Clipsham, Timothy Jack (2010). The replication of micron scale pillar arrays for medical ultrasound applications. University of Birmingham. Ph.D.

Cogswell, Daniel J. (2010). Statistical modelling of the transition toughness properties of low alloy pressure vessel steels. University of Birmingham. Eng.D.

Collins, David John (2010). Damage detection in composite materials using acoustic emission and self-sensing fibres. University of Birmingham. M.Res.

Compton, David (2012). Effects of acrylic acid on ITO coated polymer substrates for flexible displays. University of Birmingham. M.Res.

Cook, Angus James McDonald Chartres (2018). The atmospheric corrosion of 304L and 316L stainless steels under conditions relevant to the interim storage of intermediate level nuclear waste. University of Birmingham. Ph.D.

Cook, Louise (2012). Low temperature active-screen plasma surface alloying of precipitation hardening stainless steels. University of Birmingham. M.Res.

Corujeira Gallo, Santiago (2009). Active screen plasma surface engineering of austenitic stainless steel for enhanced tribological and corrosion properties. University of Birmingham. Ph.D.

Cosentino, Francesco (2013). Heat treatment of nickel based superalloys for turbine blade application: modelling and validation. University of Birmingham. Ph.D.

Courtney, James Matthew (2011). Bio-engineered gas diffusion electrodes (GDEs) for proton exchange membrane fuel cells (PEMFCs). University of Birmingham. M.Res.

Crisan, Ioan Adrian (2013). Vortex matter, dynamics and pinning in superconducting materials. University of Birmingham. D.Sc.

Cruchley, Sam (2015). The oxidation damage of Ni-based superalloy, RR1000, with different surface modifications and the role of oxidation in fatigue crack initiation. University of Birmingham. Ph.D.

Culwick, Richard (2023). Intelligent real-time monitoring of critical rail infrastructure. University of Birmingham. Ph.D.

D

D'Angio', Andrea (2018). Microwave enhanced chemical vapour infiltration of silicon carbide fibre preforms. University of Birmingham. Ph.D.

Dale, Steven (2014). A novel cfd-based approach for optimisation of the directional solidification process. University of Birmingham. Eng.D.

Dally, Robert (2017). Modelling and simulation of the microstructure of ESR ingots for power generation forgings. University of Birmingham. Ph.D.

Dashtbozorg, Behnam (2021). Development of durable antibacterial stainless steel surfaces through plasma nitriding and ultrashort pulsed laser texturing. University of Birmingham. Ph.D.

Daus, Friedrich Herbert (2010). Process, microstructure and property relationships in dissimilar nickel base superalloy inertia friction welds. University of Birmingham. Ph.D.

Davis, Amelia (2014). The characterisation and assessment of curvature in asymmetric carbon fibre composite laminates. University of Birmingham. M.Phil.

De Bono, Paola (2016). Laser welding of copper and aluminium alloys for electrical interconnects. University of Birmingham. Eng.D.

Dear, Matthew Nicholas (2016). Fatigue in SiC fibre reinforced titanium metal matrix composites. University of Birmingham. Eng.D.

Dearn, Sophie Clare (2015). Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications. University of Birmingham. Ph.D.

Degri, Malik John Jamaji (2014). The processing and characterisation of recycled NdFeB-type sintered magnets. University of Birmingham. Ph.D.

Dent, Philip Nigel (2016). Evaluation of the seabed temperature corrosion and sulphide stress cracking (SSC) resistance of weldable martensitic 13% chromium stainless steel (WMSS). University of Birmingham. M.Phil.

Dispinar, Derya (2006). Determination of metal quality of aluminium and its alloys. University of Birmingham. Ph.D.

Dong, Yangchun (2011). Towards multi-functional stainless steel surface: plasma surface alloying with N, Ag and Cu. University of Birmingham. Ph.D.

Dorey, Shaun (2016). Fabrication and characterisation of nickel manganite thin films by pulsed laser deposition. University of Birmingham. Ph.D.

Dou, Wenbo (2014). Surface modification of lean duplex stainless steels by low temperature plasma nitriding. University of Birmingham. M.Res.

Douglas, Gareth (2018). Microstructural characterisation and modelling of dilute magnesium-tin-aluminium alloys. University of Birmingham. Ph.D.

Doyle, Richard John-Paul (2016). An investigation into the hydrogen embrittlement susceptibility of experimental 304 stainless steel alloys modified with ruthenium and palladium additions. University of Birmingham. Ph.D.

Driscoll, Jonathan Richard (2018). The effect of tempering parameters on the hardness and precipitation characteristics of quenched and tempered RQT701 steel plate. University of Birmingham. M.Sc.

Du, Jinlong (2017). Development of high strength hot rolled strip steel products with bainitic microstructures. University of Birmingham. Ph.D.

Du, Jinlong (2012). Examination of the effect of tin particles and grain size on the charpy impact transition temperature in steels. University of Birmingham. M.Res.

Duan, Ranxi ORCID: 0000-0002-3401-0640 (2022). In-situ alloying based additive manufacturing of high-performance beta Ti-Mo alloys. University of Birmingham. Ph.D.

du Plessis, Andrew (2012). Low temperature plasma surface modification of stainless steels for ice sliding applications. University of Birmingham. M.Res.

du Plessis, Andrew (2015). Studies on Atmospheric Corrosion Processes in AA2024. University of Birmingham. Ph.D.

E

El-Sayed, Mahmoud Ahmed Mahmoud (2012). Double oxide film defects and mechanical properties in aluminium alloys. University of Birmingham. Ph.D.

Elghawail, Ali Mohamed (2018). Flexible forming of 3-D metal panels. University of Birmingham. Ph.D.

Erbiyik, Hikmet (1982). Production of two-part components by powder forging. University of Birmingham. M.Sc.

Ero-Phillips, Olubayode Oladiran (2012). Development of bi- and multicomponent fibres for tissue engineering by electrospinning. University of Birmingham. Ph.D.

F

Fang, Chizhou (2018). Influence of oxide growth along grain boundaries on the crack growth behaviour of a nickel-based superalloy. University of Birmingham. Ph.D.

Farmer, James (2009). A comparison of conventional heating techniques and microwave irradiation for the desorption of lithium borohydride and lithium borohydride composites. University of Birmingham. M.Eng.

Farr, Matthew (2013). A study on the impact of surface and bulk oxidation on the recyclability of NdFeB magnets. University of Birmingham. M.Res.

Farr, Matthew (2018). Production of anisotropic injection moulded NdFeB magnets from end-of-life sintered magnets. University of Birmingham. Ph.D.

Fendoni, Alessandro (2010). The effect of post weld heat treatment on the corrosion behaviour of a AA2050T34-FSW. University of Birmingham. M.Res.

Fereday, R.A. (1932). On the magnetic susceptibilities of nickel salts. University of Birmingham. Ph.D.

Fereshteh Saniee, Nessa (2010). Structural, electrical and optical properties of transparent conducting Si-doped ZnO thin films grown by pulsed laser deposition. University of Birmingham. M.Phil.

Field, Amanda Catherine (2020). Laser Powderbed Fusion (LPBF) of tungsten and tungsten alloys for nuclear fusion applications. University of Birmingham. Ph.D.

Fisk, Joseph Charles (2013). Effects of creep and oxidation interaction on high temperature crack growth behaviour of nickel based superalloys. University of Birmingham. Ph.D.

Fitzgerald, Annabel Victoria Lucy (2017). Preparation, characterisation and secondary crystallisation of PHB based copolymers and carbohydrate blends. University of Birmingham. Ph.D.

Fletcher, Sean (2010). Thin film Palladium-Ytrium membranes for hydrogen separation. University of Birmingham. Ph.D.

Flores Torres, Santiago (2018). Characterisation of weld-features in RR1000 inertia friction welds. University of Birmingham. Ph.D.

Floyd, Hayley (2018). Cobalt, chromium implant wear: investigating interactions between products and the local environment and presenting an approach for mapping tissues. University of Birmingham. Ph.D.

Forde, John (2015). The elevated temperature performance of cast aluminium alloys and the development of a cast aluminium-copper metal matrix composite. University of Birmingham. Eng.D.

Formosa, Dennis (2015). Development of long-lasting antibacterial S-phase based coatings for medical devices. University of Birmingham. Ph.D.

Fox, Sebastian Jonathan (2020). Experimental determination and thermodynamic modelling of phase diagrams for high temperature materials. University of Birmingham. Ph.D.

Frankis, Duncan (2021). The eighteenth-century Birmingham brass trade: origins, growth, and politics. University of Birmingham. Ph.D.

Friend, Gareth William (2014). The effect of defects on the mechanical properties of fibre reinforced titanium metal matrix composites under fatigue loading. University of Birmingham. Eng.D.

Frommhold, Andreas (2011). Nanotexturisation of gold surfaces and its application to neural implants. University of Birmingham. Ph.D.

Fuchs, Alexander (2005). Application of microstructural texture parameters to diffusional and displacive transformation products. University of Birmingham. Ph.D.

G

Gao, Jianshu (2018). Understanding the relationship between microstructure and mechanical properties in HIPped Ti-5Al-5Mo-5V-3Cr. University of Birmingham. Ph.D.

Gerrard, Alexander James (2014). Inclusions and hydrogen and their effects on the quality of direct chill cast and flat rolled aluminium alloys for aerospace applications. University of Birmingham. Eng.D.

Ghahari, Seyed Majid (2012). In situ synchrotron x-ray characterisation and modelling of pitting corrosion of stainless steel. University of Birmingham. Ph.D.

Ghori, Ubaid-ur-Rehman (2020). Temperature dependent plastic deformation of magnesium using micro-pillar compression. University of Birmingham. Ph.D.

Ghosh, Sukanta (2008). Effect of stress on initiation and propagation of localized corrosion in alumninium alloys. University of Birmingham. Ph.D.

Gittins, Adam (2011). Design of new MG-based glass forming compositions using liquidus temperaure calculations correlated with an elastic strain model. University of Birmingham. M.Res.

Goodall, Aimee Louise (2020). Effect of initial microstructural conditions and tempering parameters on the carbide characteristics and hardness of alloyed quenched and tempered steel. University of Birmingham. Ph.D.

Goswami, Kamal Nayan (2018). Ab initio study of the effect of solute atoms on vacancy diffusion in Ni-based superalloys. University of Birmingham. Ph.D.

Grabowski, Leon (1983). An alternating current potential difference calibration study and fatigue crack growth in steel. University of Birmingham. Ph.D.

Graves, Peter William (1963). Non-stoichiometry in titanium dioxide (rutile). University of Birmingham. Ph.D.

Greenwood, Thomas (2015). An investigation into the removal of oxide films from molten A20X with the use of rotary impellor degassing. University of Birmingham. M.Res.

Gunner, Alec Gordon (2010). The industrial development of transparent conducting coatings by a Sol-Gel route. University of Birmingham. Eng.D.

Gunson, James (2011). Effect of sensitisation on the corrosion fatigue properties of AA5456-H116. University of Birmingham. M.Res.

Guo, Liya (2016). Atmospheric localised corrosion of type 304 austenitic stainless steels. University of Birmingham. Ph.D.

Guo, Sheng (2015). Light metal borohydrides and Mg-based hydrides for hydrogen storage. University of Birmingham. Ph.D.

Guo, Yina (2013). Microstructure and texture characterisation of linear friction welding of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo. University of Birmingham. Ph.D.

H

Haenschke, Titus Paul (2013). Degradation of TiNi-based shape memory alloys (SMAs) during thermo-mechanical cycling. University of Birmingham. Ph.D.

Hall, Russell (2018). Measurement of recovery and recrystallisation in interstitial free steels using electromagnetic sensors. University of Birmingham. Ph.D.

Hamilton, Philip (2009). Hydrogen sorption in palladium doped microporous materials. University of Birmingham. M.Res.

Harahap, Mahyuni (2018). Preparation of carbon fibre preform from acetylated cellulose and nano-crystalline cellulose. University of Birmingham. M.Sc.

Hararak, Bongkot (2020). Fibre formation, characterisation and carbonisation of bio-based precursors. University of Birmingham. Ph.D.

Harris, Dee (2011). Design and development of a hyphenated technique for monitoring the cure of epoxy-amine resin systems. University of Birmingham. Ph.D.

Harris, Luke (2011). A Study of the crystallisation kinetics in PEEK and PEEK composites. University of Birmingham. M.Res.

Harrison, Nicholas (2014). Equal channel angular pressing of elemental & alloyed P/M aluminium systems. University of Birmingham. Ph.D.

Hauser, Julia Maria (2014). From Delco road to Marampa pub and back: Austria at Marampa mines, 1980-1985. University of Birmingham. M.Phil.

Hawes, Jonathan E. D. (2021). The causes of increased hydrogen uptake of zirconium based fuel claddings at high burnup. University of Birmingham. Ph.D.

Hayes, Ian (2018). Microstructural characterisation and heat treatment refinement of a particulate reinforced aluminium metal matrix composite. University of Birmingham. Ph.D.

Heard, Christopher James (2014). Structural and electronic characterisation of sub-nanometre metal particles. University of Birmingham. Ph.D.

Herraiz Lalana, Enrique (2017). Production of sintered NdFeB magnets from scrap alloy powders. University of Birmingham. Ph.D.

Herrod-Taylor, Andrew James (2011). The crystallisation of Poly (aryl ether etherketone) (PEEK) and its carbon fibre composites. University of Birmingham. M.Res.

Higgins, Daniel Louis (2017). The response of metals with different crystal structures to high strain rate loading and other mechanical tests. University of Birmingham. Ph.D.

Hill, Paul Owen (2012). Fatigue and fracture of the ultrahigh strength steel AerMet 100. University of Birmingham. Eng.D.

Hinton, Elizabeth Mary (2016). The oxidation of liquid aluminium and the potential for oxides in grain refinement of aluminium alloys. University of Birmingham. Ph.D.

Hodaeian, Hamidreza (2013). Degradation of pure magnesium alloys in simulated body fluid. University of Birmingham. M.Res.

Horspool, Dean (2014). Development of corrosion fatigue testing in sour oilfield environments. University of Birmingham. Eng.D.

Huang, Jianglin (2012). The characterisation and modelling of porosity formation in electron beam welded titanium alloys. University of Birmingham. Ph.D.

Huchler, Bernd Arthur (2009). Pressure infiltration behaviour and properties of aluminium alloy - Oxide ceramic preform composites. University of Birmingham. Ph.D.

Hudson, Dominic James (2015). Dimensional improvement of industrial gas turbine blades through enhanced process control. University of Birmingham. Ph.D.

Hughes, Luke J.R (2016). Hydrogen sorption properties of magnesium-based thin films. University of Birmingham. Ph.D.

Humphreys, Alan Owen (1998). The low temperature fracture behaviour of the super duplex stainless steel Zeron 100. University of Birmingham. Ph.D.

Hussein, Eman (2018). Numerical and experimental evaluation of advanced metal-organic framework materials for adsorption heat pumps. University of Birmingham. Ph.D.

I

Ibrahim, Sukaina (2010). Development and characterisation of calcium phosphate glasses and glass-ceramics containing fluorine and titanium. University of Birmingham. M.Res.

Imbaby, Mohamed (2010). Fabrication of 316-L stainless steel and composite micro machine components using softlithography and powder metallurgy process. University of Birmingham. Ph.D.

Indrizzi, Vanessa ORCID: 0000-0003-2244-1088 (2019). Modelling the filling and solidification of single crystal nickel-based superalloy turbine blades to understand freckle formation. University of Birmingham. Ph.D.

Iqbal, Zubera (2015). Recovery of lithium from kaolin mining waste material. University of Birmingham. Ph.D.

Irfan, Muhammad Shafiq (2013). Environmentally friendly pultrusion. University of Birmingham. Ph.D.

J

Jackson, Ryan Daniel (2010). The effect of bond coat oxidation on the microstructure and endurance of two thermal barrier coating systems. University of Birmingham. Ph.D.

Jameson, Nicola (2014). Production of aligned short-fibre composites. University of Birmingham. M.Res.

Jantara Junior, Valter Luiz (2019). Damage mechanics and condition monitoring of wind turbine gearbox materials. University of Birmingham. Ph.D.

Jarvis, Thomas (2011). Manufacturing with fine metallic powders and binder systems. University of Birmingham. Eng.D.

Jennings, Rachel Elizabeth (2022). Hybrid powder metallurgy processing for high temperature strength Ni-base superalloy Inconel 718. University of Birmingham. Ph.D.

Ji, Xiaochao (2018). Development and characterisation of multifunctional one-dimensional fibres reinforced composite coatings. University of Birmingham. Ph.D.

Jiang, Jiayun (2016). Fatigue and fracture of the friction welded titanium alloys. University of Birmingham. Ph.D.

Jiang, Kyle (2016). Advanced micro and nano fabrications for engineering applications. University of Birmingham. D.Sc.

Jiang, Siben (2019). Thermally induced sensitisation of austenitic stainless steel for AGR fuel cladding. University of Birmingham. Ph.D.

Jin, Yuecheng (2015). Melt-spun Mg-Ni for hydrogen storage. University of Birmingham. M.Res.

Johnson, Michael (2022). Phase field modelling of nickel oxidation. University of Birmingham. Ph.D.

Jones, Samantha (1993). Improved sol based ceramic moulds for use in investment casting. University of Birmingham. Ph.D.

Jones, Stephen Bruce (1971). Stable and metastable solidification of cast iron. University of Birmingham. Ph.D.

Ju, Yulin (2019). Characterisation and modelling of precipitation during the early stages of tempering for low carbon low alloy Q&T steels. University of Birmingham. Ph.D.

Jubleanu, Anca Marilena (2010). Carbo-nitride precipitation and its effect on matrix transformations in high strength-high toughness 300M steel. University of Birmingham. M.Res.

Juna, Anwar Pervez (2017). On the characterisation and detection of rolling contact fatigue (RCF) type cracks in railway vehicle wheels using an alternating current field measurement (ACFM) technique. University of Birmingham. Ph.D.

K

Kahlon, Navdeep Singh (2019). Power plant materials condition monitoring and degradation assessment. University of Birmingham. Eng.D.

Kaklamani, Georgia (2012). The effect of active screen plasma nitriding on the cellular compatibility of polmeric biomaterials. University of Birmingham. Ph.D.

Kalinowski, Piotr (2017). Recrystallisation and grain size development during forging in power generation steels. University of Birmingham. Ph.D.

Kaonda, Mususu Kosta Mpongo (2017). Prediction of the recrystallised grain size distribution after deformation for the Nb free and model steel. University of Birmingham. Ph.D.

Kassam, Tahsin Ali (2012). The controlled synthesis and characterisation of magnesium particles with nano-morphologies via physical vapor deposition for hydrogen storage. University of Birmingham. M.Res.

Keeley, Peter Michael (2018). Sustainable resource management via D.C. thermal plasma technology. University of Birmingham. Eng.D.

Kenny, Jonathan (2019). Machineable graphene toughened boron carbide nanocomposite armour (MaGiC) for lightweight armour applications. University of Birmingham. Ph.D.

Keown, Eugene Michel (2017). The effect of compressive residual stresses on the properties of tumbled-processed cemented carbide. University of Birmingham. M.Sc.

Khaled, Iman (2015). A study of some of the foundry processing factors influencing the quality of titanium alloy investment castings. University of Birmingham. Ph.D.

Khan, Ikra (2021). Improving the cytocompatibility and infection, wear and corrosion resistances of commercially pure titanium by laser micropatterning and ceramic conversion treatment. University of Birmingham. Ph.D.

Khoshkhou, Danial (2017). The use of synchrotron x-ray micro computed tomography to study the failure mechanisms of thermal barrier coatings. University of Birmingham. Eng.D.

Kimpton, Claire Michelle (2010). Effects of post weld heat treatments on the fatigue of the inertia welded nickel based superalloy RR1000 at high temperatures. University of Birmingham. Ph.D.

King, David Gareth (2018). Fibre-optic sensor development for process monitoring of epoxy resins. University of Birmingham. Ph.D.

Kitaguchi, Hiroto (2011). Inertia friction welded RR1000 and Inconel718 microstructure. University of Birmingham. Ph.D.

Knaggs, Craig (2017). Effects of surface condition on fatigue in nickel-based superalloys for aero-engine applications. University of Birmingham. Eng.D.

Kong , Yi (2003). Structure and property relationships in PET blends. University of Birmingham. Ph.D.

Kongpuang, Manwika (2022). Reliability-base monitoring and maintenance of urban railway turnout using acoustic emission. University of Birmingham. Ph.D.

Koohpayeh, Seyed Mojtaba (2007). Crystal growth of functional oxides using an image furnace. University of Birmingham. Ph.D.

Kostryzhev, Andrii Gennadiovych (2009). Bauschinger effect in Nb and V microalloyed line pipe steels. University of Birmingham. Ph.D.

Kundu, Amrita (2011). Grain structure development during casting, reheating and deformation of Nb-microalloyed steel. University of Birmingham. Ph.D.

L

Lemberger, Louis (2016). Vortex lattice in conventional and unconventional superconductors. University of Birmingham. Ph.D.

Li, Jiangling (2010). Structural characterisation of apatite-like materials. University of Birmingham. M.Res.

Li, Jing (2017). Alloying effect on boride formation behaviour in cast TiAl alloys. University of Birmingham. Ph.D.

Li, Sheng (2017). Development and processing of Ti-Ni-based shape memory alloys using laser melting techniques. University of Birmingham. Ph.D.

Li, Tian (2017). The behaviour of double oxide film defects in the processing of liquid Mg alloys. University of Birmingham. Ph.D.

Li, Wei (2011). An investigation into the effect of stress on the formation and stability of carbon s-phase on austenitic stainless steel. University of Birmingham. Ph.D.

Li, Weining ORCID: 0000-0002-8844-564X (2022). Heat-assisted incremental sheet forming of TI-6AL-4V sheets. University of Birmingham. Ph.D.

Li, Yinghui (2015). Nanostructured graphite/Li-N-H based composite materials for hydrogen storage. University of Birmingham. M.Res.

Liang, Yuan (2017). An investigation on the optimum aging condition for HFQ-processed AA6082 aluminium alloy. University of Birmingham. M.Sc.

Lin, Kaijie (2015). Development of advanced plasma surface technologies for high performance carbon paper gas diffusion layer and 316 stainless steel bipolar plates. University of Birmingham. Ph.D.

Lin, Yu-Hsiu (2010). Structure and properties of transparent conductive ZnO films grown by pulsed laser deposition (PLD). University of Birmingham. M.Res.

Lin, Yu-Pei (2010). Investigation of die wear by modelling the extrusion of Inconel 718. University of Birmingham. Ph.D.

Liu, Qiongxi (2017). An investigation of the stability of advanced carbon-based coatings under high temperature and high pressure. University of Birmingham. Ph.D.

Liu, Ran (2013). Surface modification of ASTM F-1537 Co-Cr alloy by low temperature plasma surface alloying. University of Birmingham. M.Res.

Liu, Ruixia (2012). Synthesis, characterisation and decomposition properties of manganese-based borohydrides for hydrogen storage. University of Birmingham. Ph.D.

Liu, Xi (2014). Microstructural characterisation of pearlitic and complex phase steels using image analysis methods. University of Birmingham. Ph.D.

Liu, Zhaoran (2017). Plastic deformation of Ti-6Al-4V micro-pillars at room temperature. University of Birmingham. Ph.D.

Lobato, Hugo Manuael Pinto (2012). An investigation into coordinate measuring machine task specific measurement uncertainty and automated conformance assessment of airfoil leading edge profiles. University of Birmingham. Eng.D.

Logsdail, Andrew James (2012). Computational characterisation of gold nanocluster structures. University of Birmingham. Ph.D.

Lovell, Claire Michelle (2012). Friction welding for high performance aerospace applications. University of Birmingham. Eng.D.

Lu, Xinyu (2017). In-situ transmission electron microscopy study of dislocation in TI-6AL-4V. University of Birmingham. Ph.D.

Lu, Yu (2014). Microstructure and degradation behaviour of Mg-Zn(-Ca) alloys. University of Birmingham. Ph.D.

Luo, Xia (2014). The response of ASTM F1537 Co-28Cr-6Mo alloy with different phase constituents to low-temperature plasma carburising. University of Birmingham. Ph.D.

Lyu, Yang (2022). A study of precipitates in Mg-Sn alloys. University of Birmingham. Ph.D.

M

MacDonald, James Edward (2017). Hot isostatic pressing of a high temperature Ni-superalloy CM247LC: processing-microstructure-properties. University of Birmingham. Ph.D.

MacDonald, James Edward (2012). The effect of reflective baffles on the thermal gradient in directional solidification. University of Birmingham. M.Res.

Mao, Jishen (2012). Characterisation of plasma arc technology processed waste products. University of Birmingham. M.Res.

Marigo, Michele (2012). Discrete element method modelling of complex granular motion in mixing vessels: evaluation and validation. University of Birmingham. Eng.D.

Marland, Stephen Alan (2001). Microwave beneficiation of coal to improve grindability and handleability. University of Birmingham. Ph.D.

Marsh, Joseph Jack (2017). Characterisation of crystallisation and melting in thermoplastic polymers using chip calorimetry. University of Birmingham. Ph.D.

McCain, Stephen (2012). Characterisation of the aqueous corrosion process in NdFeB melt spun ribbon and MQI bonded magnets. University of Birmingham. Ph.D.

McDonald, Katie (2015). Thermal management during direct laser deposition (DLD) of Ti-6Al-4V components. University of Birmingham. M.Res.

McNutt, Philip Alexander (2015). An investigation of cracking in laser metal deposited nickel superalloy CM247LC. University of Birmingham. Eng.D.

Meakin, Jonathan (2013). Targeted hydrogen decrepitation of ndfeb magnets from large commercial assemblies. University of Birmingham. M.Res.

Meakin, Jonathan Philip (2016). Development of a pilot scale strip casting system to produce optimised alloys for neodymium-iron-boron magnets. University of Birmingham. Ph.D.

Melo Rodríguez, Gabriela (2018). Enhancement of titanium alloy bioactivity via peptide and hydroxyapatite coatings. University of Birmingham. Ph.D.

Melotti, Federico (2017). A novel aluminium nano-composite with enhanced mechanical properties. University of Birmingham. Ph.D.

Melrose, Ben James (2011). The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851. University of Birmingham. M.Res.

Meluch, Lubos (2010). Warm compaction of aluminium alloy Alumix 123. University of Birmingham. Ph.D.

Meredith, Gavin Simon (2014). Friction stir processing for the reversal and mitigation of sensitisation and intergranular corrosion in aluminium alloy 5083-H321. University of Birmingham. Ph.D.

Mi, Na (2014). Synchrotron x-ray studies of atmospheric pitting corrosion of stainless steel. University of Birmingham. Ph.D.

Miles, Christopher James (2011). Fracture and Fatigue of the Inertia Welded Titanium Alloy Ti-6Al-2Sn-4Zr-6Mo. University of Birmingham. M.Res.

Miller, Joshua Ethan ORCID: 0000-0001-8618-6923 (2020). Large volume reconstruction and analysis of directionally solidified aluminium copper dendritic forests. University of Birmingham. Ph.D.

Mitchell, Ian (2012). Gas jet processing for local heat treatment applications. University of Birmingham. Eng.D.

Mobbs, Rebecca-Louise (2018). Cyclic steam oxidation of a steel for biomass power plant application. University of Birmingham. Eng.D.

Moghadas Mobarakeh, Parshia (2012). Tribology of ball-and-socket total disc arthroplasty. University of Birmingham. Ph.D.

Mohammed Ali, Haval Bashar (2016). Atmospheric pitting corrosion of stainless steel. University of Birmingham. Ph.D.

Mohammed Ameen, Rayan Basheer (2017). Plastic deformation of Ti-6Al-4V at small scale: a microstructural and mechanistic study. University of Birmingham. Ph.D.

Monir, Mehdi (2012). XANES study of chemistry of localised corrosion in artificial pits of 316L stainless steel and titanium. University of Birmingham. Ph.D.

Morrison, Jonathan J. (2016). Corrosion, transport, and deposition in pressurised water nuclear reactor primary coolant systems. University of Birmingham. Eng.D.

Motsi, Tafadzwa (2010). Remediation of acid mine drainage using natural zeolite. University of Birmingham. Ph.D.

Mukinay, Tatiana ORCID: 0000-0002-0228-3038 (2020). The development of antibacterial and wear resistant Ti6Al4V surfaces by silver doping, selective laser melting and thermal oxidation. University of Birmingham. Ph.D.

Munagala, Sai Priya (2020). Fabrication and characterisation of complex shaped Si-Al-O-N ceramic components via additively manufactured moulds. University of Birmingham. Ph.D.

Murphy, Shona (2011). Melting point depression in biodegradable polyesters. University of Birmingham. M.Res.

Murray, Paul (2013). Low temperature synthesis of boron carbide using a polymer precursor powder route. University of Birmingham. M.Res.

Murray, Paul James (2016). Hot isostatic pressing for the production of bimetallic fuel pump bearings. University of Birmingham. Eng.D.

Murray, Richard Cameron (2013). An investigation into fibre spreading. University of Birmingham. M.Res.

Murray, Richard Cameron (2017). Design and development of a new class of intra-filament hybrid composite. University of Birmingham. Ph.D.

Muzangaza, Emmanuel (2018). The effects of titanium Ti-6Al-4V powders manufactured using electron beam melting (EBM) - additive manufacturing on metallurgical evaluation. University of Birmingham. M.Sc.

N

Nair, Abilash Kumar Kochumulappon Raghavan (2015). Process and structural health monitoring of advanced fibre reinforced composites using optical fibre sensors. University of Birmingham. Ph.D.

Namahoot, Jutatip (2005). Effects of deformations on corrosion of Al-Mn alloys. University of Birmingham. Ph.D.

Nashwan, Zakareya (2023). Surface turbulence and the tensile properties, reproducibility and reliability of cast irons – a study of entrainment defects. University of Birmingham. Ph.D.

Neumann, Daniel (2020). Modelling the ultrasonic scatter of complex microstructures in heavy rotor forgings. University of Birmingham. Eng.D.

Newell, Matthew David (2009). Aspects of a novel casting process for the production of nickel-based superalloy high pressure turbine blades. University of Birmingham. Eng.D.

Nieves Bogonez, Francisco Daniel (2014). Fibre spreading and impregnation monitoring. University of Birmingham. M.Res.

Ning, Weili (2015). Structural health condition monitoring of carbon-fibre based composite materials using acoustic emission techniques. University of Birmingham. M.Sc.

Nowak, Igor Mateusz (2015). Development of heat resistant alloys for optimal creep performance. University of Birmingham. Eng.D.

O

O'Kelly, Paraic (2024). Design and development of \(\beta\)-titanium alloys using iron ass a low cost \(\beta\)-stabiliser. University of Birmingham. Ph.D.

Oguh, Ukachukwu. I (2012). Multiphase contacting in PGM hydrometallurgy. University of Birmingham. Eng.D.

Ojo, Samuel Olukunle (2017). Effect of surface treatment and recycling on the mechanical properties of e-glass. University of Birmingham. Ph.D.

Oluwasegun, Kunle Michael (2012). Microstructural characterisation of inertia friction welded RR1000 superalloy. University of Birmingham. Ph.D.

Oum, Melissa (2021). Modelling and experiments of metal interconnect degradation in solid oxide fuel cells. University of Birmingham. Ph.D.

P

Paloumpi, Athanasia (2010). Nanoscale magnesium as a hydrogen storage material. University of Birmingham. M.Res.

Pandiyan, Sathish (2020). Protective layer coatings for solid oxide fuel cell interconnects by Inkjet printing. University of Birmingham. Ph.D.

Pang, Bo (2016). The defect evolution in shock loaded tantalum single crystals. University of Birmingham. Ph.D.

Panwisawas, Chinnapat (2013). Modelling and prediction of recrystallisation in single crystal superalloys. University of Birmingham. Ph.D.

Parimi, Lakshmi Lavanya (2014). Additive manufacturing of nickel based superalloys for aerospace applications. University of Birmingham. Ph.D.

Park, Jun Mo (2010). Behaviours of bifilms in A356 alloy during solidification: developing observation techniques with 3-D micro x-ray tomography. University of Birmingham. M.Res.

Parkes, Andrew Martin (2018). The effect of thermal degradation on the crystallisation and mechanical properties of PEEK-glass fibre composites. University of Birmingham. Ph.D.

Parkes, Neal (2024). Nano-structuring tungsten for fusion reactors. University of Birmingham. Ph.D.

Pavey, Jonathan Michael (2014). Study of conventional annealing and laser annealing of vitreloy1b zr-based BMG. University of Birmingham. M.Res.

Payne, Jessica (2023). Qualitative condition monitoring of rail steel. University of Birmingham. M.Sc.

Pearson, Benjamin (2015). Characterisation and purification of bacterial lysates containing poly-γ-glutamic acid. University of Birmingham. M.Res.

Peng, Tao (2016). Processing and characterization of multi-walled carbon nanotube reinforced aluminium metal matrix composite. University of Birmingham. Ph.D.

Pereira, Thiago Soares (2017). Bauschinger effect in macro and micro sized high strength low alloy pipeline steels. University of Birmingham. Ph.D.

Phull, Harpinder Singh (2015). Investigation into Turbocharger crazing defect. University of Birmingham. Eng.D.

Pillinger, Ian (1984). The prediction of metal flow and properties in three-dimensional forgings using the finite element period. University of Birmingham. Ph.D.

Po-Sri, Chatuporn (2011). Elevated temperature crack growth in inertially welded nickel-based superalloys and gamma based titanium aluminides. University of Birmingham. Ph.D.

Pollard, Sarah Louise (2011). Processing and properties of titanium metal matrix composites. University of Birmingham. Eng.D.

Poole, Andrew David (2014). Development of a lean manufacturing method for the production of metallic fuel pump bearings. University of Birmingham. Eng.D.

Porter, Matthew Thomas ORCID: 0000-0002-9227-4185 (2020). High-temperature ceramic matrix composites prepared via microwave energy enhanced chemical vapour infiltration. University of Birmingham. Ph.D.

Potoczny, Grzegorz A. (2012). Electro-mechanical behaviour of indium tin oxide coated polymer substrates for flexible electronics. University of Birmingham. Ph.D.

Powell, Adam R (2014). The fabrication of aluminium: carbon nanotube metal matrix composites. University of Birmingham. M.Phil.

Pretorius, Cornelius Johannes (2013). Machining of titanium alloys with ultra-hard cutting tool materials. University of Birmingham. Ph.D.

Punch, Rachel Bridget (2014). Toughness enhancement of high strength low alloy strip steels. University of Birmingham. Ph.D.

Q

Qi, Shaojun (2017). Fabrication and characterisation of graphene-based multi-functional coatings. University of Birmingham. Ph.D.

Qiu, Chunlei (2010). Net-shape hot isostatic pressing of a nickel-based powder superalloy. University of Birmingham. Ph.D.

R

Rai, Subash (2019). Role of sulphur on carbon deposition on AGR fuel cladding steel. University of Birmingham. Ph.D.

Ramakrishnan, Praveen (2016). Processing of fluoro alumino-silicate glass-ceramics by Field Assisted Sintering Technology and honeycomb extrusion technique. University of Birmingham. Ph.D.

Ranalli, Juan Manuel (2018). Relationship between microstructure and corrosion of pressure vessel cladding materials. University of Birmingham. Ph.D.

Rangel, Joseph (2021). A field dislocation mechanics approach to modelling the influence of microstructure on fatigue behaviour of nickel-based superalloys. University of Birmingham. Ph.D.

Rattanakit, Rattanachai (2013). Optimisation of the aluminium compressor impeller machining process. University of Birmingham. Eng.D.

Redmore, Eleanor (2011). Surface treatment of a low-cost beta titanium alloy to combat wear. University of Birmingham. M.Res.

Reed, Daniel Thomas (2010). An investigation into the synthesis and characterisation of metal borohydrides for hydrogen storage. University of Birmingham. Ph.D.

Reynolds, Phillip John (2012). A Surlyn® ionomer as a self-healing and self-sensing composite. University of Birmingham. M.Res.

Rimmer, Sophie (2022). Understanding the fine grinding of calcium carbonate. University of Birmingham. Ph.D.

Roach, Peter J (2013). Electrophoretic deposition of primary coat onto investment casting wax patterns. University of Birmingham. Ph.D.

Robbins, Kate Elizabeth (2017). Secondary crystallisation and degradation during long term aging of P(HB-co-HV). University of Birmingham. Ph.D.

Roberts, William Michael (2012). The synthesis and characterisation of lead-free piezoelectric ceramics. University of Birmingham. M.Res.

Rosser, Jim (2021). Oxidation and spallation of austenitic stainless steels for ultra-supercritical plant application. University of Birmingham. Ph.D.

Routledge, David Philip (2013). Joining of NiTi-based shape memory alloys to Ti-6Al-4V. University of Birmingham. Eng.D.

Ruszala, Matthew James Amor (2013). Fines reduction and energy optimisation in aggregates production. University of Birmingham. M.Res.

S

Saedon, Juri Bin (2012). Micromilling of hardened (62 HRC) AISI D2 cold work tool steel. University of Birmingham. Ph.D.

Samothrakitis, Stavros (2018). Neutron & X-ray scattering studies of Fe-based materials. University of Birmingham. Ph.D.

Sato, Atsushi (2012). Nickel-based single crystal superalloys for industrial gas turbines. University of Birmingham. Ph.D.

Scarpantonio, Luca (2011). Studies of DNA binding of lanthanide platinum complexes. University of Birmingham. Ph.D.

Schennach, Friederike (2012). Oxidation of two different Pt-aluminised bond coats. University of Birmingham. Ph.D.

Scotti, Lucia (2016). First-principles study of solute diffusion mechanisms in alpha-Ti. University of Birmingham. Ph.D.

Seymour, Andrew Richard Ian (2018). Optimisation of the fracture toughness of a novel ultra-high strength maraging steel. University of Birmingham. Eng.D.

Shah, Amjad (2011). Experimental optimization of the CAPRI process. University of Birmingham. Ph.D.

Shao, Siheng (2023). The production and evaluation of highly-aligned nano-fibre preforms using electro-spinning. University of Birmingham. Ph.D.

Shapcott, Stephen (2015). Characterisation of aluminium armour alloy AA7017-T651. University of Birmingham. M.Res.

Sheridan, Richard Stuart (2014). Optimisation of HDDR processing parameters of sintered NDFEB magnets. University of Birmingham. Ph.D.

Shi, Shengrun (2015). Evaluating the structural integrity of high strength low alloy steels considered for shipbuilding using acoustic emission. University of Birmingham. M.Res.

Shichao, Liu (2017). Development of TiA1-based alloys using suspended droplet alloying. University of Birmingham. Ph.D.

Shu, Chang (2018). Investigation of the structural and functional properties of lead-free barium calcium zirconate titanate piezoceramics. University of Birmingham. Ph.D.

Si, Shanshan (2020). Micromechanical study of the role of precipitates on the plastic deformation of AZ91 magnesium alloy. University of Birmingham. Ph.D.

Siggs, Eirian Bethany (2010). Laser and electron beam treatments for corrosion protection of friction stir welds in aerospace alloys. University of Birmingham. Eng.D.

Simms, Henry George (2011). Oxidation behaviour of Austenitic stainless steels at high temperature in supercritical plant. University of Birmingham. M.Res.

Simpson, Christopher (2015). Microstructural and mechanical characterisation of the IW Ni-base superalloy RR1000. University of Birmingham. Ph.D.

Simpson, George Innes (2012). An investigation into thin film palladium alloy composite membranes with a powdered tungsten intermediate layer for the separation of hydrogen. University of Birmingham. M.Res.

Singh, Preabjot Kaur (2013). Investigating the Mg-Li systems using different compositions for the purpose of hydrogen storage. University of Birmingham. M.Res.

Slater, Carl (2012). The static and dynamic behaviour of carbon fibre composites used in golf club shafts. University of Birmingham. Ph.D.

Snodin, Katie Amelia (2011). The effects of sustained load (crack growth) testing in inertia friction welded Udimet 720Li turbine disc alloy at elevated temperatures. University of Birmingham. M.Res.

Song, Xiaoning (2011). Microstructure and mechanical properties of electrodeposited copper films. University of Birmingham. M.Phil.

Song, Zihan (2023). 4D quantifications of intermetallics in solidifying aluminium alloys. University of Birmingham. Ph.D.

Sorrell, Jessica (2011). Characterisation of Silsesquioxane-Poly(Methyl Methacrylate) blends. University of Birmingham. M.Res.

Spathara, Dimtira ORCID: 0000-0003-4861-0388 (2019). Study on the surface modifications of single crystal Ni-based superalloys during industrial processing at high temperatures. University of Birmingham. Ph.D.

Squire, Peter James (2009). Development of multi-component iron-based amorphous alloy. University of Birmingham. Ph.D.

Stevens, Peter Alastair (2015). Shear zone properties of inertia friction welds. University of Birmingham. Eng.D.

Street, Steven Richard (2017). Atmospheric corrosion of austenitic stainless steels. University of Birmingham. Ph.D.

Su, Shei Sia (2012). Development of hypereutectic Al-Si based P/M alloys. University of Birmingham. Ph.D.

Su, Tina Yu-Ting (2014). Deformation twinning in magnesium using nano-indentation. University of Birmingham. M.Phil.

Sun, Jifeng (2013). Time-dependent crack growth in a coarse-grained Ni-based superalloy RR1000. University of Birmingham. Ph.D.

Swan, Jason David (2016). Durville casting of nickel-iron valve bars. University of Birmingham. Ph.D.

T

Tang, Lei (2022). Revealing deformation mechanisms of advanced face-centred cubic alloys at cryogenic environment via in situ neutron diffraction. University of Birmingham. Ph.D.

Tanner, Joseph Leo (2010). Fabrication and characterisation of multilayer test structures for coated conductor cylinder technology. University of Birmingham. Ph.D.

Tao, Tao (2013). Modelling of laser repair of single crystal nickel based superalloys. University of Birmingham. M.Phil.

Taylor, Scott (2012). Recovery of platinum group metals from waste sources. University of Birmingham. M.Phil.

Tedds, Steven Paul (2011). Microporous materials for hydrogen storage. University of Birmingham. Ph.D.

Thongchai, Tanikan (2018). Fabrication of lead free and lead based 1-3 piezoelectric composites for high frequency ultrasound transducers. University of Birmingham. Ph.D.

Tian, Jinsen (2019). Grain boundary segregation of P and its interaction with Cr and Mo in Ni-base alloys. University of Birmingham. Ph.D.

Toft, Michael (2012). The effect of crystalline morphology on the glass transition and enthalpic relaxation in poly (ether-ether-ketone). University of Birmingham. M.Res.

Tovee, John-Paul (2014). Microstructural influence on the effects of forward and reverse mechanical deformation in HSLA X65 and X80 linepipe steels. University of Birmingham. Ph.D.

Tran, Dung Trung (2011). Gold-containing bimetallicnanoparticles. University of Birmingham. Ph.D.

Trejo, Eduardo (2011). Centrifugal casting of an aluminium alloy. University of Birmingham. Ph.D.

Trzcińska, Zuzanna (2014). Development of peptide sequences which are able to bind to the surface of titanium and hydroxyapatite. University of Birmingham. M.Res.

Turner, Richard Paul (2010). Linear friction welding of Ti-6Al-4V: modelling and validation. University of Birmingham. Eng.D.

V

Villa, Matteo (2016). Metallurgical and mechanical modelling of Ti-6Al-4V for welding applications. University of Birmingham. Ph.D.

Vines, Joshua Edwin (2017). The effect of carbon and silicon-based additives on the hydrogen storage properties of Lithium Borohydride. University of Birmingham. Ph.D.

Vorster, Werner (2001). The effect of microwave radiation on mineral processing. University of Birmingham. Ph.D.

Voulazeris, Georgios (2018). Portable atom interferometry: investigation on magnetic shielding techniques for compact quantum sensors. University of Birmingham. Ph.D.

W

Wait, Claire Fiona (2016). Clean filament winding: industrial site trials and product evaluation. University of Birmingham. Ph.D.

Walsh, Anna (2015). Investigation into a thermo-sensitive chitosan/β-glycerophosphate hydrogel for ocular wound-healing. University of Birmingham. M.Res.

Walters, Elliot Alexander (2020). Study of the anti-coking properties of a new centrifugally cast alloy for ethylene cracker furnaces. University of Birmingham. Ph.D.

Walters, Matthew (2016). Sulphide stress cracking test development for a weldable 13%CR supermartensitic stainless steel in simulated seabed environments. University of Birmingham. Eng.D.

Wang, Fei (2017). Austenite grain growth behaviour of HSLA steel during reheating treatment. University of Birmingham. Ph.D.

Wang, Hang (2012). Thermodynamic modelling of high strength, high toughness Ti alloys. University of Birmingham. Ph.D.

Wang, Minshi (2017). Microstructure characterisation and creep modelling of HP40 alloys. University of Birmingham. Ph.D.

Wang, Shiyuan (2015). Fatigue crack threshold and growth behaviour in a near fully-lamellar gamma based titanium aluminides. University of Birmingham. Ph.D.

Wang, Wei (2016). Selective laser melting of al alloys: microstructure and mechanical property development. University of Birmingham. Ph.D.

Wang, Xiqian (2018). Improving the microstructure, mechanical properties & process route in selective laser melting of nickel-superalloys. University of Birmingham. Ph.D.

Wang, Ye (2014). Self-assembled nanorods and nanowires from oxide functional materials grown by pulsed laser deposition. University of Birmingham. Ph.D.

Wang, Yongjing (2017). Sustainable self-healing structural composites. University of Birmingham. Ph.D.

Ward, Andrew (2015). Development of a lead-free aluminium bearing alloy using powder metallurgy manufacturing techniques. University of Birmingham. Eng.D.

Warren, James Raphael (2012). The effect of hydrogen on palladium-copper based membranes for hydrogen purification. University of Birmingham. M.Res.

Watson, Christopher (2015). Modelling high integrity steel forgings for turbine applications in the power generation industry. University of Birmingham. Eng.D.

Watson, Robert (2016). New numerical techniques to quantify and predict the effect of entrainment defects, applied to high pressure die casting. University of Birmingham. Ph.D.

Webster, Rhiannon Alys (2010). Passive materials for high frequency piezocomposite ultrasonic transducers. University of Birmingham. Ph.D.

Wei, Qi ORCID: 0000-0002-4711-4668 (2020). Corrosion of Ti-based bulk metallic glasses for small diameter dental implants. University of Birmingham. Ph.D.

Weihuan, Kong ORCID: 0000-0002-1723-1732 (2022). Selective laser melting of high strength-to-modulus ratio tntz and tntz-o alloys tailored for load-bearing biomedical applications. University of Birmingham. Ph.D.

Weller, Sean David Tomey (2010). Lead-free Solder Technology. University of Birmingham. Eng.D.

Whittaker, Richard James (2011). An investigation into cold dwell fatigue behaviour in Ti6246 and other aerospace alloys. University of Birmingham. Eng.D.

Williams, Andrew (2010). Microstructural analysis of aluminium alloy 2096 as a function of heat treatment. University of Birmingham. M.Res.

Williamson, Kenny (2015). Corrosion of CoCrMo knee implants during storage. University of Birmingham. M.Res.

Wilson, Robin (2016). Optimisation of the linear friction welding for Ti- 6Al-4V aero engine application. University of Birmingham. Eng.D.

Wu, Jing (2016). Microstructure and mechanical properties of Mg-Zn-(Y/Gd) alloys. University of Birmingham. Ph.D.

Wu, Wenwen (2010). Development and characterisation of novel low-friction wear-resistant multiplayer nanocomposite CrAlTiCN coatings. University of Birmingham. Ph.D.

Wu, Zhaoxuan (2023). Deformation of Ti-6Al-4V micro-pillars with different β phase contents. University of Birmingham. Ph.D.

Wu, Zhiwei (2010). Novel joining for Ti and TiAl aeroengine components. University of Birmingham. Ph.D.

Wyse, Richard (2014). Investigation of Zr-based amorphous alloy membranes for hydrogen purification. University of Birmingham. M.Res.

X

Xie, Shuang (2017). Microstructure and mechanical properties of inertia friction welded Ti-6Al-4V. University of Birmingham. Ph.D.

Xiong, Xinhe (2023). Catalytic ceramic conversion of Zr702 alloy surfaces for combating wear and corrosion. University of Birmingham. Ph.D.

Xu, Weichen (2014). Synchrotron x-ray and electrochemical studies of pitting corrosion of iron. University of Birmingham. Ph.D.

Y

Yan, Jin ORCID: 0000-0002-6693-3394 (2021). Crack growth in alloy 709 at high temperatures under fatigue, creep and dwell-fatigue loads. University of Birmingham. Ph.D.

Yang, Biao (2018). Photonic topological metamaterials. University of Birmingham. Ph.D.

Yang, Chao (2012). Solidification behaviour and hipping induced surface modification in Ti4522XD castings. University of Birmingham. Ph.D.

Yang, Jian (2015). Microstructure-property development in linear friction welding of nickel-based superalloys. University of Birmingham. Ph.D.

Yang, Jing (2015). Fatigue crack propagation threshold in lamellar TiAl alloys. University of Birmingham. Ph.D.

Yang, Libin (2010). Modelling of the inertia welding of Inconel 718. University of Birmingham. Ph.D.

Yates, Adam (2015). The effect of microstructure on mechanical properties in inertia welded titanium 6-4. University of Birmingham. M.Res.

Ye, Ruoru (2015). Microstructure characterisation and mechanical behaviour of linear friction welded ni-based superalloys. University of Birmingham. Ph.D.

Yearwood, Gavin (2019). Location specific properties in an aerospace alloy. University of Birmingham. Ph.D.

Yi, Xiaodong (2014). Rapidly solidified magnesium: nickel alloys as hydrogen storage materials. University of Birmingham. Ph.D.

Yilmazer, Pinar (2013). Structural health condition monitoring of rails using acoustic emission techniques. University of Birmingham. M.Res.

Young, Ela (2022). Advanced scattering techniques for the investigation of radiation-induced damage in nuclear materials. University of Birmingham. Ph.D.

Yu, Fei (2015). Corrosion of titanium for biomedical applications. University of Birmingham. Ph.D.

Yu, Suyang (2016). Dwell fatigue crack growth at elevated temperatures in an advanced nickel disc superalloy. University of Birmingham. Ph.D.

Yue, Yang (2014). Modelling of the effects of entrainment defects on mechanical properties in Al-Si-Mg alloy castings. University of Birmingham. Ph.D.

Z

Zeng, Ruilin (2013). Precipitation hardening in AZ91 magnesium alloy. University of Birmingham. Ph.D.

Zhang, Bo (2005). Development of corrosion resistant galvanising alloys. University of Birmingham. Ph.D.

Zhang, Dayue (2015). Characterisation and modelling of segregation in continuously cast steel slab. University of Birmingham. Ph.D.

Zhang, Guowei (2017). Modelling of weldment microstructure in non-age hardening Al-based alloys. University of Birmingham. M.Phil.

Zhang, Kun (2010). The microstructure and properties of hipped powder Ti alloys. University of Birmingham. Ph.D.

Zhang, Qinqin (2011). The microstructure and properties of powder HIPped nickel-based superalloy CM247LC. University of Birmingham. Ph.D.

Zhang, Shiling (2017). Improving the tribological and corrosion properties of Zr702 and Zircaloy-4 alloys by Ceramic Conversion Treatment. University of Birmingham. Ph.D.

Zhang, Siqi (2011). Effect of zinc substitution on the structure of calcium Fluoro-Alumino-Silicate glasses and glass-ceramics. University of Birmingham. M.Phil.

Zhang, Ye (2019). Dielectric and piezoelectric properties of reduced-graphite- oxide/poly(vinylidene fluoride) nanocomposite and its related devices. University of Birmingham. Ph.D.

Zhang, Yue (2018). Corrosion of titanium, zirconium and their alloys for biomedical applications. University of Birmingham. Ph.D.

Zhao, Xinxin (2014). Fabrication and plastic deformation of copper at small scales. University of Birmingham. Ph.D.

Zhou, Hansen (2014). EM sensor measurements of degradation in steels. University of Birmingham. M.Res.

Zhou, Jun (2014). Towards the designer surface for ceramic injection moulds. University of Birmingham. M.Phil.

Zhou, Lei (2015). Non-destructive characterisation of steel microstructures using electromagnetic sensors. University of Birmingham. Ph.D.

Zhou, Wei (2019). High resolution microscopy of NdFeB magnets produced from flash spark plasma sintering (FSPS) and the hydrogen ductilisation process (HyDP). University of Birmingham. Ph.D.