Development and characterisation of a fibre-optic acoustic emission sensor

Burns, Jonathan Mark (2012). Development and characterisation of a fibre-optic acoustic emission sensor. University of Birmingham. Ph.D.


Download (3MB)


A requirement for online monitoring has emerged owing to the susceptibility of fibre reinforced composite materials to sub-surface damage. Acoustic emission (AE) monitoring is
understood to detect damage well before catastrophic failure; research in AE sensing therefore continues to attract significant attention.

The research presented herein provides a review of a fibre-optic-based AE sensor design. Developmental work was performed to evaluate both sensor fabrication and packaging-related issues. The characteristics of the sensor were found to be influenced by: (i) the type of optical fibre used for fabrication; and (ii) preparation of optical fibres prior to sensor fabrication. The use of a small-diameter packaging substrate revealed improvements in sensor performance. The fibre-optic AE sensor was successfully embedded in a uni-directional composite laminate that was fabricated using autoclave processing. The embedded fibre-optic sensor was found to provide higher sensitivity to simulated AE compared with a surface-mounted sensor.

Sensor characterisation trials were performed using simulated AE; a low directional sensitivity was observed. Modal analysis revealed a preferential sensitivity to the A0 wavemode; this sensor design may therefore be suited to the detection of delamination in FRCs. Finally, the sensor was shown to successfully detect interlaminar crack propagation under Mode-I loading.

Type of Work: Thesis (Doctorates > Ph.D.)
Award Type: Doctorates > Ph.D.
College/Faculty: Colleges (2008 onwards) > College of Engineering & Physical Sciences
School or Department: School of Metallurgy and Materials
Funders: None/not applicable
Subjects: T Technology > TN Mining engineering. Metallurgy


Request a Correction Request a Correction
View Item View Item


Downloads per month over past year