Damage detection and damage evolution monitoring of composite materials for naval applications using acoustic emission testing

Angelopoulos, Nikolaos (2017). Damage detection and damage evolution monitoring of composite materials for naval applications using acoustic emission testing. University of Birmingham. Ph.D.

PDF - Accepted Version

Download (14MB)


Maritime transport has profound importance for the world economy. Vessels of all sizes constantly transport large numbers of passengers and goods across the sea, often under adverse operational conditions. Vessels need to exhibit high levels of reliability, availability, maintainability and safety (RAMS). However, at the same time their performance needs to be optimised ensuring the lowest possible fuel consumption with the maximum operational capacity and range without compromising RAMS. Sweating of naval assets and profitability should be maximised for the operator ensuring investment in future projects and supporting the growth of maritime transport and world economy as a whole.
Vessels have been traditionally manufactured using naval steel grades such AH, DH and EH. Smaller leisure and specialised purpose vessels such as patrol boats, etc. have been built using fibre-reinforced composite (FRC) materials. This trend is gradually penetrating the market of larger commercial vessels including freight and cruise ships. However, these are still the early days and further investigation of the optimum FRC manufacturing techniques and mechanical properties together with an in-depth understanding of the damage mechanics are required before such materials can become more commonplace.
This project has investigated different glass FRCs using different manufacturing techniques. Glass fibres are preferred due to their lower cost in comparison with carbon fibres. The use of carbon FRCs in maritime applications is limited to the fabrication of racing and high performance speedboat vessels. Samples manufactured under laboratory conditions have been compared with those manufactured by a shipyard. It has been seen that the in-house samples had generally superior performance. Steel-to-composite joints have also been assessed including different designs. The effect of different features in the design such as drilled holes and bolts on the mechanical performance of the manufactured samples has also been evaluated.
The damage mechanisms involved during damage propagation and features causing damage initiation have been considered. Damage initiation and subsequent evolution have been monitored using acoustic emission (AE). Various signal processing approaches have been employed (manual and automatic) for optimum evaluation of the AE data obtained in a semiquantitative manner. It has been shown that AE could be applied effectively for structural health monitoring of naval structures in the field. Several factors and parameters that need to be considered during acquisition and analysis have been successfully determined. The key results of the study together with mechanical testing and characterisation of samples employed are presented in summarised form within the present thesis.

Type of Work: Thesis (Doctorates > Ph.D.)
Award Type: Doctorates > Ph.D.
College/Faculty: Colleges (2008 onwards) > College of Engineering & Physical Sciences
School or Department: School of Metallurgy and Materials
Funders: European Commission
Subjects: T Technology > TN Mining engineering. Metallurgy
V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering
URI: http://etheses.bham.ac.uk/id/eprint/7597


Request a Correction Request a Correction
View Item View Item


Downloads per month over past year