eTheses Repository

Items where Division is "Colleges (2008 onwards) > College of Engineering & Physical Sciences"

 Up a level
 Export as ASCII CitationBibTeXDublin CoreEP3 XMLEndNoteHTML CitationJSONMETSOAI-ORE Resource Map (Atom Format)OAI-ORE Resource Map (RDF Format)Object IDsOpenURL ContextObjectRDF+N-TriplesRDF+N3RDF+XMLRefWorksReferReference Manager
Group by: Author | Department | Year of Award | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 1779.

A

A. M. P. Kashani, Mitra (2013) Effect of cation substitutions in an ionomer glass composition on the setting reaction and properties of the resulting glass ionomer cements. Ph.D. thesis, University of Birmingham.

Abbas, Mohammad (2017) Remote sensing of road surface conditions. Ph.D. thesis, University of Birmingham.

Abd Rashid, Nur Emileen Binti (2012) Automatic vehicle classification in a low frequency forward scatter micro-radar. Ph.D. thesis, University of Birmingham.

Abdelhafeez Hassan, Ali Mohamed (2017) Burr formation and effects when drilling metallic/composite stack assemblies. Ph.D. thesis, University of Birmingham.

Abdi, Mohammad Javad (2013) Cardinality optimization problems. Ph.D. thesis, University of Birmingham.

Abdul Aziz, Azizan Bin (2017) Crystallization and enthalpic relaxation studies on a Copolymer of lactic acid. Ph.D. thesis, University of Birmingham.

Abdul Karem, Waleed (2009) Vibration assisted filling of thin section castings. Ph.D. thesis, University of Birmingham.

Abdullah, Che Zulkhairi (2013) Parametric sweep search for parallel robot workspace determination. Ph.D. thesis, University of Birmingham.

Abdullah, Nik Rosli (2011) Effects of split injection and exhaust gas recirculation strategies on combustion and emissions characteristics in a modern V6 diesel engine. Ph.D. thesis, University of Birmingham.

Abdullahi, Ismaila (2014) Magnetic resonance imaging of copper corrosion. M.Res. thesis, University of Birmingham.

Abdullahi, Akilu Sada (2015) Visualisation of ribosomal subunits interaction reveals 80s ribosomes in the nucleus of Drosophila cells. Ph.D. thesis, University of Birmingham.

Abdullahi, Bala (2015) Development and optimization of heat pipe based compound parabolic collector. Ph.D. thesis, University of Birmingham.

Abo-Zaid, Ghada Mohammed Abdallah (2011) Individual patient data meta-analysis of prognostic factor studies. Ph.D. thesis, University of Birmingham.

Abu Aisheh, Yazan (2011) Climate change and the built environment: an evaluation of sustainable refurbishment options for higher education buildings in the UK. Ph.D. thesis, University of Birmingham.

Abu Issa, Abdallatif S (2009) Low Power High Fault Coverage Test Techniques for Digital VLSI Circuits. Ph.D. thesis, University of Birmingham.

Abuelela, Waleed Mostafa Kamal Abdelfatah (2010) Hardy type inequalities for non-convex domains. Ph.D. thesis, University of Birmingham.

Adams, Luke Wayne (2009) Experimental and computational study of non-turbulent flow regimes and cavern formation of non-Newtonian fluids in a stirred tank. Ph.D. thesis, University of Birmingham.

Adams, Samuel Joseph (2015) Luminescent surface-active transition metal complexes as probes for sensing and supramolecular recognition architectures. Ph.D. thesis, University of Birmingham.

Adcock, Holly Victoria (2015) Novel transformations for the synthesis of nitrogen containing carbo- and heterocycles. Ph.D. thesis, University of Birmingham.

Adegbite, Stephen Ademola (2010) Coating of catalyst supports: links between slurry characteristics, coating process and final coating quality. Ph.D. thesis, University of Birmingham.

Adetoye, Adedayo Oyelakin (2009) Secure information flow: analysis and enforcement. Ph.D. thesis, University of Birmingham.

Adrwish, Salahadin Muhammed Ali (2013) The processing and characterisation of recycled NdFeB based magnets. Ph.D. thesis, University of Birmingham.

Afroozi Milani, Mohammad (2016) Non-linear analysis of optical and microwave sources. Ph.D. thesis, University of Birmingham.

Afzaal, Muhammad Faheem (2014) Breakup and instability analysis of compound liquid jets. Ph.D. thesis, University of Birmingham.

Ahmad, Hesham Saleh Mahmoud (2011) Development of KM model for knowledge management implementation and application in construction projects. Ph.D. thesis, University of Birmingham.

Ahmad, Zubair (2016) Using semi-infinite optimisation to calculate price bounds for basket options. Ph.D. thesis, University of Birmingham.

Ahmad Salimi, Midhat Nabil (2013) Systematic investigations of calcium phosphates produced by wet chemistry method and supercritical processing techniques. Ph.D. thesis, University of Birmingham.

Ahmad Tajudin, Saiful Azhar (2012) Electrokinetic stabilisation of soft clay. Ph.D. thesis, University of Birmingham.

Ahmadinejad, Mehrdad (2016) Modelling soot oxidation in DPF and modelling of PGM loading effect in a DOC. Ph.D. thesis, University of Birmingham.

Ahmadipour, Sanaz (2016) Studies towards the asymmetric synthesis of Dictyoxetane. Ph.D. thesis, University of Birmingham.

Ahmed, Amna Mohamed Abdelgader (2012) Abstract topological dynamics. Ph.D. thesis, University of Birmingham.

Ahmed, Mohammad Afraz (2015) A Cahn-Hilliard approach to modelling phase separation in bimetallic nanoparticles. Ph.D. thesis, University of Birmingham.

Ahmed, Shamim (2010) Total synthesis of ferrugine and synthetic studies towards ferrugine and stemofoline. Ph.D. thesis, University of Birmingham.

Ainsworth, Mark J (2011) Metal-foam interface stability during the filling of lost foam moulds with aluminium alloys. Ph.D. thesis, University of Birmingham.

Akena, Robert p'Ojok (2014) Improving road transport energy efficiency through driver training. Ph.D. thesis, University of Birmingham.

Akhoondzadehasl, Lida (2011) Polarization behaviour of on-body communication channels at 2.45 GHz. Ph.D. thesis, University of Birmingham.

Akhtar, Naveed (2010) Single-Chamber solid oxide fuel cells: modelling and experiments. Ph.D. thesis, University of Birmingham.

Akhtar, Noreen (2010) The fundamental interactions between deposits and surfaces at nanoscale using atomic force microscopy. Ph.D. thesis, University of Birmingham.

Akhyani, Ramin (2015) Resilience of geotechnical assets. M.Phil. thesis, University of Birmingham.

Al Baity, Heyam (2015) A quantum behaved particle swarm approach to multi-objective optimization. Ph.D. thesis, University of Birmingham.

Al Jubori, Ayad Mahmoud Salman (2017) Development and optimization of efficient small-scale turbines for organic rankine cycle powered by low-temperature heat sources. Ph.D. thesis, University of Birmingham.

Al Khateeb, Shadi Mohammad Abdel Kareem (2009) Growth and characterisation of textured superconducting tapes. Ph.D. thesis, University of Birmingham.

Al Lafi, Abdul Ghaffar (2009) Cross linked sulphonated poly (ether ether ketone) for the development of polymer electrolyte membrane fuel cell. Ph.D. thesis, University of Birmingham.

Al Otaibi, Sultanah (2017) Machine learning methods for delay estimation in gravitationally lensed signals. Ph.D. thesis, University of Birmingham.

Al Qahtani, Yasser (2017) Particulate matter characterization and control in premixed compression ignition engines. Ph.D. thesis, University of Birmingham.

Al-Abachi, Anas Mouayed (2016) Synthesis and structure determination of new pharmaceutical cocrystals. M.Phil. thesis, University of Birmingham.

Al-Ajeli, Ahmed Khelfa Obeid (2017) Fourier-Motzkin methods for fault diagnosis in discrete event systems. Ph.D. thesis, University of Birmingham.

Al-Azzani, Sarah (2014) Architecture-centric testing for security. Ph.D. thesis, University of Birmingham.

Al-Darmaki, Naeema Ibrahim Karam (2012) Extraction and enrichment of minor lipid components of palm fatty acid distillate using supercritical carbon dioxide. Ph.D. thesis, University of Birmingham.

Al-Ghamdi, Khalid A. (2011) Improving the practice of experimental design in manufacturing engineering. Ph.D. thesis, University of Birmingham.

Al-Herz, Mansour (2012) Multiphase catalytic reactions in a trickle bed reactor. Ph.D. thesis, University of Birmingham.

Al-Janabi, Shahad Sadeq (2013) Chlorine quenching phenomena and the application of fluorescence spectroscopy in drinking water. Ph.D. thesis, University of Birmingham.

Al-Mohaithef, Mohammed (2014) Food hygiene in hospitals: evaluating food safety knowledge, attitudes and practices of foodservice staff and prerequisite programs in Riyadh's hospitals, Saudi Arabia. Ph.D. thesis, University of Birmingham.

Al-Mufachi, Naser Azzat (2015) Effects of palladium thin films on the hydrogen permeability of Pd-Cu alloy membranes. Ph.D. thesis, University of Birmingham.

Al-Mutlaq, Fahad Mohammed (2011) Aspects of the use of electric arc furance dust in concrete. Ph.D. thesis, University of Birmingham.

Al-Obaidy, Nesreen (2017) Treatment of collapsible soil using encased stone columns. Ph.D. thesis, University of Birmingham.

Al-Rubaee, Rasha Hassan (2012) A conceptual model to effectively prioritise recovery of roads damaged by natural/man-made disasters. Ph.D. thesis, University of Birmingham.

Al-Sharify, Zainab Talib Abidzaid (2017) Flow and mixing of complex fluids. Ph.D. thesis, University of Birmingham.

Al-Zobaidi, Zaid (2014) Coherent minimisation: aggressive optimisation for symbolic finite state transducers. Ph.D. thesis, University of Birmingham.

Alansari, Marwah (2016) Automated managed cloud-platforms based on energy policies. Ph.D. thesis, University of Birmingham.

Alberini, Federico (2014) Blending of non-Newtonian fluids in static mixers: assessment via optical methods. Ph.D. thesis, University of Birmingham.

Aldeka, Ayad Basheer (2015) Seismic response of acceleration-sensitive non-structural components mounted on irregular multi-storey reinforced concrete buildings. Ph.D. thesis, University of Birmingham.

Aldihani, Adel (2017) Enhancing the performance of PV system in dusty environment. Ph.D. thesis, University of Birmingham.

Aldossary, Abdulrahman S. (2017) Development and performance characterisation of high concentrating multi-junction PV/Thermal technology. Ph.D. thesis, University of Birmingham.

Alexandre, Didier (2016) Hyperon production in p-Pb collisions with ALICE at the LHC. Ph.D. thesis, University of Birmingham.

Alfarag, Fadhil (2016) On some multivariate control charts. Ph.D. thesis, University of Birmingham.

Algareu, Abdulmaged Omer (2017) Development of reflective low concentrated photovoltaic/ thermal system. Ph.D. thesis, University of Birmingham.

Algharibi, Amani Jaber H (2016) Technology validation for e-trial systems. Ph.D. thesis, University of Birmingham.

Alharbi, Yousef Fayz M (2013) Error variance estimation in nonparametric regression models. Ph.D. thesis, University of Birmingham.

Alharthi, Majed (2014) Fouling and cleaning studies of protein fouling at pasteurisation temperatures. Ph.D. thesis, University of Birmingham.

Ali, Mohd Faizal (2016) Development of mucoadhesive biopolymers for food formulation. Ph.D. thesis, University of Birmingham.

Ali Pitchay, Sakinah (2013) Advances in single frame image recovery. Ph.D. thesis, University of Birmingham.

Aljohani, Abdulaziz Mousa (2015) Pilgrim crowd dynamics. Ph.D. thesis, University of Birmingham.

Alkalai, Mohamed A. (2015) Table recognition in mathematical documents. Ph.D. thesis, University of Birmingham.

Allbrooke, Benedict Marc Miller (2015) Search for the Higgs Boson decaying to a b quark pair produced in association with a W Boson using missing transverse energy triggered events at ATLAS. Ph.D. thesis, University of Birmingham.

Almarshed, Abdullah (2016) Laboratory investigation of nanoscale dispersed catalyst for inhibition coke formation and upgrading of heavy oil during THAI process. Ph.D. thesis, University of Birmingham.

Almeman, Khalid Abdulrahman (2015) Reducing out-of-vocabulary in morphology to improve the accuracy in Arabic dialects speech recognition. Ph.D. thesis, University of Birmingham.

Almutairi, Ghzzai (2013) Ageing of integrated-planar Solid Oxide Fuel Cells. Ph.D. thesis, University of Birmingham.

Alodib, Mohammed Ibrahim (2011) Creation, integrating and deployment of diagnoser for web services. Ph.D. thesis, University of Birmingham.

Alotaibi, Fahd Saleh S. (2015) Fine-grained Arabic named entity recognition. Ph.D. thesis, University of Birmingham.

Alqahtani, Ali Mubark (2017) Computational studies of homogeneous charge compression ignition, spark ignition and opposed piston single cylinder engines. Ph.D. thesis, University of Birmingham.

Alqahtani, Fahad Khshim (2017) Production of novel manufactured plastic aggregate and its utilisation in concrete. Ph.D. thesis, University of Birmingham.

Alrashidi, Azizah (2015) Nonlinear control for non-Newtonian flows. Ph.D. thesis, University of Birmingham.

Alrebeish, Faisal (2016) Adaptively improving performance stability of cloud based application using the modern portfolio theory. Ph.D. thesis, University of Birmingham.

Alsamaq, Suzanne (2012) Carbon cycle: capture and activation of carbon dioxide using hydrotalcites. Ph.D. thesis, University of Birmingham.

Alshammari, Mohammad (2016) Adaptation based on learning style and knowledge level in e-learning systems. Ph.D. thesis, University of Birmingham.

Alshammari, Naif Khalaf (2011) An investigation into spinal injury from vehicle crashes in Saudi Arabia. Ph.D. thesis, University of Birmingham.

Alsharif, Abdullah Madhi (2014) Instability of non-uniform viscoelastic liquid jets. Ph.D. thesis, University of Birmingham.

Alshino, Abdulmonem (2010) Evolution of X-ray and optical properties of galaxy clusters. Ph.D. thesis, University of Birmingham.

Alsoqyani, Faihan Saleh (2017) Supercritical water oxidation of nitrogen-containing organic compounds: process enhancement using isopropyl alcohol. Ph.D. thesis, University of Birmingham.

Althafiri, Faisal S. (2016) Treatment of endocrine disrupting chemicals using the downflow gas contractor reactor. Ph.D. thesis, University of Birmingham.

Alwanain, Mohammed Ibrahim (2016) Automated composition of sequence diagrams. Ph.D. thesis, University of Birmingham.

Alyahya, Khulood (2017) Fitness landscape analysis of a class of np-hard problems. Ph.D. thesis, University of Birmingham.

Alzaghoul, Esra Fawaz Ahmad (2015) Value- and debt-aware selection and composition in cloud-based service-oriented architectures using real options. Ph.D. thesis, University of Birmingham.

Ameedeen , Mohamed Ariff (2012) A model driven approach to analysis and synthesis of sequence diagrams. Ph.D. thesis, University of Birmingham.

Amini, Arash (2016) Online condition monitoring of railway wheelsets. Ph.D. thesis, University of Birmingham.

Amini, Roxana (2016) Physical modelling of vibro stone column using recycled aggregates. Ph.D. thesis, University of Birmingham.

Anastasiadis, Charalampos (2012) Development of novel alloys for use as hydrogen purification membranes. M.Res. thesis, University of Birmingham.

Andrews, Daniel (2015) Employing branching comics to design, visualise and evaluate interactive stories. Ph.D. thesis, University of Birmingham.

Angelopoulos, Nikolaos (2017) Damage detection and damage evolution monitoring of composite materials for naval applications using acoustic emission testing. Ph.D. thesis, University of Birmingham.

Angulo-Fernandez, Ursula (2011) Effect of iron dosing on metal and phosphorus behaviour in anaerobic digesters. M.Phil. thesis, University of Birmingham.

Anicetus Muche, Tanyi (2010) Synthesis, characterisation and applications of bimetallic nanoparticles. M.Res. thesis, University of Birmingham.

Anvarian, Amir Hossein Pour-Taghi (2015) Physiology of escherichia coli in orange juice: applications of flow cytometry. Ph.D. thesis, University of Birmingham.

Anyala, Michael (2011) Investigation of the impact of climate change on road maintenance. Ph.D. thesis, University of Birmingham.

Aponte, Jennifer (2014) Towards the total synthesis of Gelsemine. Ph.D. thesis, University of Birmingham.

Arabi, Samaneh (2016) Virtual vibration testing of body and power unit mounted components (diesel engine EGR coolant rail). Ph.D. thesis, University of Birmingham.

Arar, Naseem (2014) Production of epoxy/e-glass composites using “clean pultrusion”. M.Res. thesis, University of Birmingham.

Arasteh, Shaghayegh (2012) Periplasmic expression of D1.3 Fab antibody in E. coli. M.Phil. thesis, University of Birmingham.

Arcuri, Andrea (2009) Automatic software generation and improvement through search based techniques. Ph.D. thesis, University of Birmingham.

Arjona Villicaña, Pedro David (2010) Chain Routing: A novel routing framework for increasing resilience and stability in the Internet. Ph.D. thesis, University of Birmingham.

Armstrong, Brian (2011) The study of pharmaceutical powder mixing through improved flow property characterisation and tomographic imaging of blend content uniformity. Eng.D. thesis, University of Birmingham.

Arriola Rios, Veronica Esther (2013) Learning to predict the behaviour of deformable objects through and for robotic interaction. Ph.D. thesis, University of Birmingham.

Arzamasovs, Maksims (2014) Static and dynamic correlation functions in one-dimensional bose liquids. Ph.D. thesis, University of Birmingham.

Asada, Tomotsugu (2013) Novel condition monitoring techniques applied to improve the dependability of railway point machines. Ph.D. thesis, University of Birmingham.

Asadipour Farsani, Benyamin (2014) Effects of formulation and processing conditions on the physical properties of fat crystal networks. M.Res. thesis, University of Birmingham.

Asghari, Amir Kasra (2017) Microstructural engineering of cakes. Eng.D. thesis, University of Birmingham.

Ashour, Samir (2016) The response of stone columns under the cyclic loading. Ph.D. thesis, University of Birmingham.

Askari Louyeh, Maryam (2017) Silver, magnesium and zinc substituted hydroxyapatite for orthopaedic applications. Ph.D. thesis, University of Birmingham.

Askins, John Stephen (2010) Performance and supply of fluids in a modern gas turbine. Eng.D. thesis, University of Birmingham.

Aslam, Omar Shezad (2010) Manufacturing of a fast-dissolving dosage form - investigating powder handling and control of surface characteristics. M.Res. thesis, University of Birmingham.

Assadi Langroudi, Arya (2014) Micromechanics of collapse in loess. Ph.D. thesis, University of Birmingham.

Assam, Aieat (2013) Sensor-Enhanced imaging. Ph.D. thesis, University of Birmingham.

Astill, Sarah (2010) Odd characterizations of almost simple groups - 3-local and character theoretic methods. Ph.D. thesis, University of Birmingham.

Astley, Kelly (2010) The co-modulation of apoptosis and the cell cycle. Ph.D. thesis, University of Birmingham.

Aston, Stuart M. (2011) Optical read-out techniques for the control of test-masses in gravitational wave observatories. Ph.D. thesis, University of Birmingham.

Atapattu Arachchille, Kanchana Chamila (2010) Universal completions of the cyclic amalgams of the same type. M.Phil. thesis, University of Birmingham.

Attallah, Moataz (2008) Microstructure property development in friction stir welds of aluminim based alloys. Ph.D. thesis, University of Birmingham.

Avery, Thomas W. (2016) On the production of defect free honeycomb extrudate. Eng.D. thesis, University of Birmingham.

Awang Kechik, Mohd Mustafa (2011) Improvement of critical current density in YBa2Cu3O7-δ films with nano-inclusions. Ph.D. thesis, University of Birmingham.

Azimifar, Seyed Ali (2015) Corrosion of bipolar plates in PEM fuel cells. Ph.D. thesis, University of Birmingham.

B

Badger, Matthew (2013) Problem-solving in undergraduate mathematics and computer aided assessment. Ph.D. thesis, University of Birmingham.

Bagheriasl, Soroosh (2013) Development and characterisation of polyhydroxybutyrate from selected bacterial species. Ph.D. thesis, University of Birmingham.

Bahari, Alireza (2012) Subcritical water mediatedhydrolysis of cider lees asaroute for recovery of high value compounds. Ph.D. thesis, University of Birmingham.

Bahr Ennil, Ali (2017) Optimization of small-scale axial turbine for distributed compressed air energy storage system. Ph.D. thesis, University of Birmingham.

Bai, Hao (2010) A generic fault detection and diagnosis approach for pneumatic and electric driven railway assets. Ph.D. thesis, University of Birmingham.

Bai, Yang (2015) Vibrational energy harvesting using piezoelectric ceramics and free-standing thick-film structures. Ph.D. thesis, University of Birmingham.

Bailey, Andrew David (2009) Almost everywhere convergence of dyadic partial sums of Fourier series for almost periodic functions. M.Phil. thesis, University of Birmingham.

Bailey, Andrew David (2012) Some results in harmonic analysis related to pointwise convergence and maximal operators. Ph.D. thesis, University of Birmingham.

Bailey, Sam Christopher (2017) New analytical techniques for the investigation of alpha clustering in nuclei. Ph.D. thesis, University of Birmingham.

Bajwa, Imran Sarwar (2014) A natural language processing approach to generate SBVR and OCL. Ph.D. thesis, University of Birmingham.

Baker, Adam Richard Ernest (2011) The use of the Monte Carlo technique in the simulation of small-scale dosimeters and microdosimeters. Ph.D. thesis, University of Birmingham.

Baker, Annabelle R. (2014) Synthesis and characterisation of novel metal pyrophosphates. Ph.D. thesis, University of Birmingham.

Baker, Josef B. (2012) A linear grammar approach for the analysis of mathematical documents. Ph.D. thesis, University of Birmingham.

Baker, Sarah (2015) Investigating the process - microstructure - mechanical property development in Ti-6AL-4V friction stir welds. Ph.D. thesis, University of Birmingham.

Baker, Scarlett (2011) An investigation into static crack growth and dwell-fatigue in the nickel based superalloy RR1000 at elevated temperatures. M.Res. thesis, University of Birmingham.

Baker, Thomas (2014) Studying the synthesis and reactivity of sulfonium ylides derived via gold catalysts. Ph.D. thesis, University of Birmingham.

Baldock, Philip Peter George (2015) The effects of hydrogen ion irradiation on mechanical properties of SiC-based materials using an MC40 cyclotron. M.Res. thesis, University of Birmingham.

Bale, Philip (2012) Feeding properties of the highly grain refined A20X alloy. M.Res. thesis, University of Birmingham.

Ballard, Herman Glenn (2000) The last planner system of production control. Ph.D. thesis, University of Birmingham.

Bamford, Rosemary Anne (2015) Development of fluorophore-tagged DNA probes for cellular imaging applications. Ph.D. thesis, University of Birmingham.

Bannerman, Alistair L. (2016) Imaging the development of a bone-to-bone ligament construct. Ph.D. thesis, University of Birmingham.

Bansil, Hardeep Singh (2014) Diffractive dijet production in √s = 7 TeV pp collisions at the ATLAS Experiment. Ph.D. thesis, University of Birmingham.

Banwait, Sukraj Kaur (2010) Metallo-Supramolecular complexes and their interactions with biomolecules and cells. Ph.D. thesis, University of Birmingham.

Bao, Minxi (2014) Structural and functional integrity of energy-efficiency glazing units. Ph.D. thesis, University of Birmingham.

Baragilly, Mohammed Hussein Hassan (2016) Clustering multivariate and functional data using spatial rank functions. Ph.D. thesis, University of Birmingham.

Barea, Matthew Ernest John (2012) An investigation into liposomal formulations for targeted drug delivery to the colon. Ph.D. thesis, University of Birmingham.

Barker, Duncan James (2010) Evaluation of microwave microscopy for dielectric characterisation. Ph.D. thesis, University of Birmingham.

Barnes, Spencer Charles (2016) Viscoelastic properties of the bladder and design of a surgical instrument for the removal of bladder tumours. Ph.D. thesis, University of Birmingham.

Barnett, Sally Jillian Anthony (2016) The use of a risk based approach to identify the uncertainties associated with flooding of highway drainage infrastructure. Ph.D. thesis, University of Birmingham.

Barr, Matthew Roland (2014) Alpha clustering in the ground state of neutron rich light nuclei. Ph.D. thesis, University of Birmingham.

Barrett, Matthew (2016) Investigations into the reactivity of alkynes and sulfur oxides under gold catalysis. Ph.D. thesis, University of Birmingham.

Barrett, Richard (2014) Novel processing routes for neural interfaces. Ph.D. thesis, University of Birmingham.

Barry, Nathan (2008) Lead-free solders for high-reliability applications: high-cycle fatigue studies. Eng.D. thesis, University of Birmingham.

Barwell, Andrew David (2011) Omega-Limit Sets of Discrete Dynamical Systems. Ph.D. thesis, University of Birmingham.

Basevi, Hector Richard Abraham (2015) Use of prior information and probabilistic image reconstruction for optical tomographic imaging. Ph.D. thesis, University of Birmingham.

Bassi, Rachan (2011) Absolute instability in curved liquid jets. Ph.D. thesis, University of Birmingham.

Batten, Ian Gilbert (2016) Trusted execution: applications and verification. Ph.D. thesis, University of Birmingham.

Bauer, Karl (2015) Scanning probe energy loss spectroscopy (SPELS) of structured surfaces. Ph.D. thesis, University of Birmingham.

Baumert, Mathis (2013) Dipole traps and optical lattices for quantum simulations. Ph.D. thesis, University of Birmingham.

Bawakid, Abdullah (2011) Automatic documents summarization using ontology based methodologies. Ph.D. thesis, University of Birmingham.

Begum, Yasmin (2013) Synthesis and characterisation of Mn$$^3$$$$^+$$ condensed phosphate phases and Fe$$^3$$$$^+$$ substituted analogues. Ph.D. thesis, University of Birmingham.

Behrang, Zahra (2015) Root systems of Levi type for Lie algebras of affine type. Ph.D. thesis, University of Birmingham.

Behroozi, Mohammad H. (2014) Finite element analysis of aircraft tyres. Ph.D. thesis, University of Birmingham.

Bell, David Thomas (2016) PET film artificial weathering: the action of degradation agents on bulk and surface properties. Eng.D. thesis, University of Birmingham.

Bell, Duncan (2012) Development of differential evolution algorithms applied to crystal structure solution from powder diffraction data. Ph.D. thesis, University of Birmingham.

Bell, Gerard Anthony (2012) Novel nanomechanical property instrumentation development and its application to surface engineered systems. Eng.D. thesis, University of Birmingham.

Bell, Robert (2015) The effect of microwave fields on the interaction of hydrogen with hydride forming materials. Eng.D. thesis, University of Birmingham.

Bell, Sarah Dawn (2016) The development of radioactive gas imaging for the study of chemical flow processes. Ph.D. thesis, University of Birmingham.

Bellefontaine, George (2010) The corrosion of CoCrMo alloys for biomedical applications. M.Res. thesis, University of Birmingham.

Beltran Portalés, David (2017) Geometric control of oscillatory integrals. Ph.D. thesis, University of Birmingham.

Benmerah, Samia (2015) Design and fabrication of novel regenerative implant based on polymeric material. Ph.D. thesis, University of Birmingham.

Bennett, Andrew James (2010) Investigation of an immune algorithm and differential evolution to study folding of model proteins. Ph.D. thesis, University of Birmingham.

Bennett, Christopher James (2015) Solitary and transitional waves in two-layer microchannel flows. Ph.D. thesis, University of Birmingham.

Bennett, Elizabeth (2017) Synthesis of metal alloy nanoparticles by cathodic corrosion and their use in electrochemical oxidation of small organic molecules. M.Sc. thesis, University of Birmingham.

Bennett, Tom (2015) Modelling of crushing operations in the aggregates industry. M.Res. thesis, University of Birmingham.

Bergman, Zara Dominique (2015) 2,3,4-Trisubstituted piperidines. A stereocontolled approach. Ph.D. thesis, University of Birmingham.

Beri, Akash (2010) Preparing Biological surfaces with well defined density and spatial distribution. M.Res. thesis, University of Birmingham.

Beri, Akash (2015) Wax based emulsions for use in lipstick application. Eng.D. thesis, University of Birmingham.

Berwick, Matthew Robert (2016) The de novo design of lanthanide coiled coils for imaging applications. Ph.D. thesis, University of Birmingham.

Beshay, Youssef Kamal (2010) The application of positron emission particle tracking to study non-metallic inclusions in metal castings. Ph.D. thesis, University of Birmingham.

Betou, Marie (2013) Semipinacol rearrangement of cis-fused β-lactam diols into bicyclic lactams. Ph.D. thesis, University of Birmingham.

Bhaduri, Debajyoti (2014) Ultrasonic assisted creep feed grinding and dressing of advanced aerospace alloys. Ph.D. thesis, University of Birmingham.

Bhattacharyya, Shyamal Kumar (2009) Highway embankment design in Bangladesh. M.Phil. thesis, University of Birmingham.

Bieroza, Magdalena Zofia (2010) Characterising water treatment works performance using fluorescence spectroscopy. Ph.D. thesis, University of Birmingham.

Binks, Daniel Anthony (2010) Magnetic resonance studies of chemical reactions in microemulsions. Ph.D. thesis, University of Birmingham.

Birdi, Gurpreet (2014) Elucidating the biological role of silicon and designing a delivery system to enhance early bone mineralisation. Ph.D. thesis, University of Birmingham.

Blackham, Benjamin Luke (2015) The development of a binder system and process for the manufacture of large diameter tungsten carbide drill blanks. Eng.D. thesis, University of Birmingham.

Blackmore, Caroline Elizabeth (2017) Experimental and theoretical studies of the atomic structure of platinum-based nanoclusters. Ph.D. thesis, University of Birmingham.

Blevins, Mark (2015) Development and characterisation of chitosan and polyhydroxybutyrate based polymeric scaffolds. Ph.D. thesis, University of Birmingham.

Blyth, Mark Ernest William (2011) An investigation of sensory and behavioural fidelity in gaming technologies to support enhanced perception of intent of insurgents. M.Phil. thesis, University of Birmingham.

Boamah, Paulina Agyekum (2010) Development of models for optimal road maintenance fund allocation : A case of Ghana. Ph.D. thesis, University of Birmingham.

Boddice, Daniel (2015) Changing geophysical contrast between archaeological features and surrounding soil. Ph.D. thesis, University of Birmingham.

Bode, Michel (2016) Random graphs on the hyperbolic plane. Ph.D. thesis, University of Birmingham.

Bogarra-Macias, Maria del Carmen (2017) Characterisation of particulate matter emitted by gasoline direct injection engines and its impact on environment catalysts. Ph.D. thesis, University of Birmingham.

Boissonade, Jonathan James (2015) Direct contact measurement of the dielectric properties of glass ionomer cements for MEMs design. Ph.D. thesis, University of Birmingham.

Boissonnet, Michel-Franck (2015) Hydrogen-bonding ferrocene derivatives for molecular recognition and organocatalysis. Ph.D. thesis, University of Birmingham.

Bolarinwa, Aminat (2010) The formulation of a bioresponsive ceramic bone replacement. Ph.D. thesis, University of Birmingham.

Bolorforoush, Mohammad (2014) Sustainable energy strategy for historic churches and cathedrals in the UK. M.Phil. thesis, University of Birmingham.

Bond, Charlotte Zoë (2014) How to stay in shape: overcoming beam and mirror distortions in advanced gravitational wave interferometers. Ph.D. thesis, University of Birmingham.

Bootkrajang, Jakramate (2013) Supervised learning with random labelling errors. Ph.D. thesis, University of Birmingham.

Bossini, Diego (2016) Asteroseismology of red giant stars: a tool for constraining stellar models. Ph.D. thesis, University of Birmingham.

Bottomley, Joseph Anthony (2012) Novel application of atomic force microscopy to the analysis of barrier film defects. Eng.D. thesis, University of Birmingham.

Boukhobza, Jonathan (2017) The effects of scratch damage on the fatigue performance of a nickle-based superalloy used for aerospace applications. Eng.D. thesis, University of Birmingham.

Bovo, Filippo (2015) Thermal dynamics of one-dimensional quantum systems. Ph.D. thesis, University of Birmingham.

Bradbeer, Jennifer Frances (2014) Self-structuring foods based on acid-sensitive gellan gum systems to impact on satiety. Ph.D. thesis, University of Birmingham.

Bradford, Peter (2012) The aggregation of iron oxide nanoparticles in magnetic fields. Ph.D. thesis, University of Birmingham.

Bradford, William (2012) An evaluation of the historical approaches to uncertainty in the provision of Victorian reservoirs in the UK, and the implications for future water resources planning. Ph.D. thesis, University of Birmingham.

Bradshaw, Miranda (2015) nEUCLID: a new homodyne interferometer with space applications. Ph.D. thesis, University of Birmingham.

Braik, Malik Shehadeh (2016) A highly adaptable model based – method for colour image interpretation. Ph.D. thesis, University of Birmingham.

Brammall, M.I. (2011) Stoner criteria in transition metal oxides and heavy fermions. Ph.D. thesis, University of Birmingham.

Brampton, David (2010) Destabilization of lithium borohydride with additions of magnesium hydride. M.Res. thesis, University of Birmingham.

Branco, Carolina Musse (2017) Multilayer membranes for intermediate temperature polymer electrolyte fuel cells. Ph.D. thesis, University of Birmingham.

Brannan, Mark (2017) Towards spinor condensates at ultralow magnetic field: creating dipolar quantum gases. Ph.D. thesis, University of Birmingham.

Brannon, Helen Louise (2014) The development of novel adhesion promoters for waterborne coatings and polypropylene car bumpers. Eng.D. thesis, University of Birmingham.

Brewer, Carl (2014) Coal by rail: historic trends and transhipment modelling. M.Res. thesis, University of Birmingham.

Briffa, Amy K.R. (2012) Low temperature magnetic ordering of frustrated rare-earth pyrochlores. Ph.D. thesis, University of Birmingham.

Bright, Lois Eleanor (2017) Ligands and complexes for non-covalent binding to G-quadruplex DNA structures. Ph.D. thesis, University of Birmingham.

Britland, Mark (2010) Accuracy of a learner’s edits to their learner model. M.Res. thesis, University of Birmingham.

Brookes, Diane Patricia (2016) Interferometric radio observations of the interactive winds of massive stars. Ph.D. thesis, University of Birmingham.

Brookfield, Tom (2015) Overgroups of a linear Singer cycle in classical groups. Ph.D. thesis, University of Birmingham.

Brown, Daniel (2009) The management of Trihalomethanes in water supply systems preferred access arrangement. Ph.D. thesis, University of Birmingham.

Brown, Daniel David (2016) Interactions of light and mirrors: advanced techniques for modelling future gravitational wave detectors. Ph.D. thesis, University of Birmingham.

Brown, Ian (2010) $$Pyrococcus$$ $$furiosus$$ amylase as a Candidate Sterilisation Time-Temperature Integrator. Ph.D. thesis, University of Birmingham.

Brown, James (2015) Articulated statistical shape models for the analysis of bone destruction in mouse models of rheumatoid arthritis. Ph.D. thesis, University of Birmingham.

Brown, Philip Andrew (2012) Investigations of proton transfer reaction mass spectrometry for applications in organophosphate detection and breath analysis. Ph.D. thesis, University of Birmingham.

Brown, Zoe Katherine (2010) The drying of foods using supercritical carbon dioxide. Eng.D. thesis, University of Birmingham.

Bruma, Alina (2013) A combined experimental and computational study of AuPd nanoparticles. Ph.D. thesis, University of Birmingham.

Buhagiar, Joseph (2008) Plasma surface engineering and characterisation of biomedical stainless steels. Ph.D. thesis, University of Birmingham.

Bullen, Gemma Anne (2015) Anthracene tagged biomolecules for DNA binding. Ph.D. thesis, University of Birmingham.

Burch, Henry Arthur (2016) Nanostructured electrodes for photoelectrochemical water splitting. Ph.D. thesis, University of Birmingham.

Burke, Mark J. (2013) Extragalactic X-ray binaries: black holes and neutron stars in Centaurus A. Ph.D. thesis, University of Birmingham.

Burley, Andrew (2013) Effects of composition on the properties of phospholipid bilayers. Ph.D. thesis, University of Birmingham.

Burnard, David John (2015) Positron emission particle tracking of inclusions in cast liquid metals. Ph.D. thesis, University of Birmingham.

Burns, Jonathan Mark (2012) Development and characterisation of a fibre-optic acoustic emission sensor. Ph.D. thesis, University of Birmingham.

Burrill, Nathan Stuart (2015) Emulsion processing using the combined electrical and shear forces. M.Res. thesis, University of Birmingham.

Burrows, Kyle (2013) The effects of acrylic acid on the electro-mechanical behaviour of ITO-coated polymer substrates for flexible display technologies. M.Res. thesis, University of Birmingham.

Burton, Thomas (2009) Transverse spin asymmetries in neutral strange particle production. Ph.D. thesis, University of Birmingham.

Busuttil, Markus (2014) The influence of glass coating on the forging of nickel-based superalloys. Ph.D. thesis, University of Birmingham.

Byravan, Rama (2015) Non-absorbable iron chelators for the treatment of colorectal cancer. Ph.D. thesis, University of Birmingham.

Byrne, William Frederick (2016) Situated creativity-inspired problem-solving. Ph.D. thesis, University of Birmingham.

C

Cabanillas Navarro, Alejandro (2015) Enantioselective synthesis of diketopiperazines and triketopiperazines. Ph.D. thesis, University of Birmingham.

Caldwell, Simon James (2015) Experimental and computational evaluation of activated carbons for carbon dioxide capture from high pressure gas mixtures. Ph.D. thesis, University of Birmingham.

Calle Alonso, Natalia (2013) Tetra-stranded metallo-supramolecular cylinders. design, synthesis and DNA binding studies. Ph.D. thesis, University of Birmingham.

Cameron, Alistair (2014) Investigations into unconventional superconductors through the use of small angle neutron scattering. Ph.D. thesis, University of Birmingham.

Campbell, Andrew Stewart (2013) Mobile impurities in one-dimensional quantum liquids. Ph.D. thesis, University of Birmingham.

Cao, Lu (2016) Deposition of size-selected nanoclusters. Ph.D. thesis, University of Birmingham.

Cao, Ping (2016) Smart adsorption materials and systems for recovery of high value protein products. Ph.D. thesis, University of Birmingham.

Cao, Siyang (2016) Flexible bond wire capacitive strain sensor for a vehicle tyre. Ph.D. thesis, University of Birmingham.

Carapetudo Antas, Fábio Tomé (2015) An assessment of the utility of subcritical water to recover bioactive compounds from cider lees. Ph.D. thesis, University of Birmingham.

Cardo, Lucia (2010) Metallo-supramolecular cylinders and their peptide conjugates. Synthesis, dynamics and DNA recognition. Ph.D. thesis, University of Birmingham.

Carey, Thomas (2013) Chemical control of thermal expansion in zeolites with the LTA topology. Ph.D. thesis, University of Birmingham.

Carlisle, Graeme Nigel (2012) Stiffness variation in hockey sticks and the impact on stick performance. M.Phil. thesis, University of Birmingham.

Carr-Smith, James (2015) Modified nucleic acids: structural studies and applications in biosensing. Ph.D. thesis, University of Birmingham.

Carter, Luke Nelson (2013) Selective laser melting of nickel superalloys for high temperature applications. Ph.D. thesis, University of Birmingham.

Casey, Tyrone Christopher (2013) Studies toward the total synthesis of phyllaemblic acid. Ph.D. thesis, University of Birmingham.

Cashman, Miriam (2015) Alternative cut-off and surface finishing of investment castings. M.Sc. thesis, University of Birmingham.

Cashmore, Jason (2014) Operation, characterisation & physical modelling of unflattened medical linear accelerator beams and their application to radiotherapy treatment planning. Ph.D. thesis, University of Birmingham.

Cassell, Eleanor Jane (2013) Conjugacy classes in finite groups, commuting graphs and character degrees. Ph.D. thesis, University of Birmingham.

Catton, Emma Louise (2010) Photoelectron Spectroscopy of highly oriented pyrolytic graphite using intense ultrashort laser pulses. Ph.D. thesis, University of Birmingham.

Cave, Andrew M. (2016) The statistical physics of the 1-D to 2-D crossover using transfer function techniques. Ph.D. thesis, University of Birmingham.

Cekic, Gokcen (2015) Wave regimes and mass transfer in two-layer falling films. Ph.D. thesis, University of Birmingham.

Cenci, Steven Michael (2014) Acoustic agitation of dense carbon dioxide/water mixtures: emulsification, mass transfer, and reaction engineering. Ph.D. thesis, University of Birmingham.

Chakrabarti, Debalay (2007) Development of bimodal grain structures and their effect on toughness in HSLA steel. Ph.D. thesis, University of Birmingham.

Challou, Floritsa (2016) Surface pasteurisation of food packages by the inversion method. Ph.D. thesis, University of Birmingham.

Champion, James (2015) Use of computational fluid dynamics to improve the layer thickness control of polyester based multilayered films. Eng.D. thesis, University of Birmingham.

Chandan, Amrit Singh (2015) Investigations into intermediate temperature polymer electrolyte fuel cell gas diffusion layers: when science meets art. Ph.D. thesis, University of Birmingham.

Chandra, Arjun (2011) A methodical framework for engineering co-evolution for simulating socio-economic game playing agents. Ph.D. thesis, University of Birmingham.

Chantry, Ruth L. (2013) Characterising the structure and properties of bimetallic nanoparticles. Ph.D. thesis, University of Birmingham.

Chapman, Emma Louise (2009) Theoretical Studies on the ultrafast photodissociation of molecules. Ph.D. thesis, University of Birmingham.

Charalambous, Marianna (2011) Implementation of food safety management systems in small enterprises in Cyprus. Ph.D. thesis, University of Birmingham.

Chard, Alison Elizabeth (2012) Deformation of inclusions in rail steel due to rolling contact. M.Res. thesis, University of Birmingham.

Charlesworth, Scott (2012) Design of photo-switchable self-assembled monolayers for the study of protein-receptor interactions. Ph.D. thesis, University of Birmingham.

Chater, Philip A (2010) Mixed anion complex hydrides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Chatzopoulou, Elli (2015) Exploring regiocontrolled gold-catalysed alkyne activation for efficient synthesis of nitogen heterocycles. Ph.D. thesis, University of Birmingham.

Che Dzul-Kifli, Syahida (2012) Chaotic dynamical systems. Ph.D. thesis, University of Birmingham.

Chekulaev, Dimitri (2012) Experimental study of ultrafast carrier dynamics and plasmons in nanostructures. Ph.D. thesis, University of Birmingham.

Chen, Lei (2012) Real time traffic management in junction areas and bottleneck sections on mainline railways. Ph.D. thesis, University of Birmingham.

Chen, Liang-Ting (2014) On a purely categorical framework for coalgebraic modal logic. Ph.D. thesis, University of Birmingham.

Chen, Qi (2017) The effect of transition metal additions on double oxide film defects in al alloy castings. Ph.D. thesis, University of Birmingham.

Chen, Tao (2016) Self-aware and self-adaptive autoscaling for cloud based services. Ph.D. thesis, University of Birmingham.

Chen, Tzu-Yu (2012) Immobilisation of caesium from crystalline silicotitanate by hot isostatic pressing. Ph.D. thesis, University of Birmingham.

Chen, Xi (2015) Degradation studies on plant cellulose and bacterial cellulose by FT-IR and ESEM. M.Res. thesis, University of Birmingham.

Chen, Xindi (2017) Development of an upgrade selection process for railway renewal projects. Ph.D. thesis, University of Birmingham.

Chen, Xiuli (2015) An optimal control approach to testing theories of human information processing constraints. Ph.D. thesis, University of Birmingham.

Chen, Xudong (2013) Investigation on the impact damage of glass using the combined finite/discrete element method. Ph.D. thesis, University of Birmingham.

Chen, Yao (2013) Improving railway safety risk assessment study. Ph.D. thesis, University of Birmingham.

Chen, Ziyu (2013) The crystallization of Poly(ethylene terephthalate) studied by thermal analysis and FTIR spectroscopy. Ph.D. thesis, University of Birmingham.

Cheneler, David (2010) The Design and Analysis of a Micro Squeeze Flow Rheometer. Ph.D. thesis, University of Birmingham.

Cheng, Leong Ching (2009) Ferroelectric microwave circuits. Ph.D. thesis, University of Birmingham.

Cheng, Xu (2012) Inert refractory systems for casting of titanium alloys. Ph.D. thesis, University of Birmingham.

Cheng, Yingyao (2013) Numerical modelling of the interaction between oat plants and realistic wind loading. M.Phil. thesis, University of Birmingham.

Ching, Heng Wei (2011) Airflow testing of aero-engine components. M.Phil. thesis, University of Birmingham.

Chiou, Emmanouil (2017) Flexible robotic control via co-operation between an operator and an ai-based control system. Ph.D. thesis, University of Birmingham.

Chisholm , Andrew Stephen (2014) Measurements of the $$\chi$$$$_c$$ and $$\chi$$$$_b$$ quarkonium states in $$\rho$$$$\rho$$ collisions with the ATLAS experiment. Ph.D. thesis, University of Birmingham.

Chitsaz Charandabi, Sahand (2014) Development of a Lorentz force drive system for a torsional paddle microresonator using Focused Ion Beam machining. Ph.D. thesis, University of Birmingham.

Chiu, Yen-Lin (2014) Joining behaviour of crystalline and amorphous Zr-based alloy using Cu-based braze. M.Phil. thesis, University of Birmingham.

Chlebek, Jennifer (2009) Modelling of simple prismatic channels with varying roughness using the SKM and a study of flows in smooth non-prismatic channels with skewed floodplains. Ph.D. thesis, University of Birmingham.

Chong, Jun Jie (2013) The application of thermal, catalytic and non-thermal plasma oxidation processes to enhance NO-NO$$_2$$oxidation in the engine exhaust and improve DPF regeneration at lower temperatures. Ph.D. thesis, University of Birmingham.

Christofferson, Andrew Joseph (2010) A Computational Investigation of the Mechanism of CB1954 Reduction by E.coli Nitroreductase. Ph.D. thesis, University of Birmingham.

Chryssafidou, Evangelia (2014) Argument diagramming and planning cognition in argumentative writing. Ph.D. thesis, University of Birmingham.

Chu, Shih-Chi (2012) Effect of silica particles on foam stability. Ph.D. thesis, University of Birmingham.

Chuang, Chienmin (2012) Multi-asset option pricing problems: a variational approach. Ph.D. thesis, University of Birmingham.

Chung, Ka Fai (2013) Processing and characterisation of liquid crystal nanocomposites. M.Res. thesis, University of Birmingham.

Chung, Kenneth Hoi Kan (2009) Mixing in high throughput experimentation reactors. Ph.D. thesis, University of Birmingham.

Claire, Sunil (2016) Development of Nanoparticles for Imaging Applications. Ph.D. thesis, University of Birmingham.

Clancy, Michael (2017) Application and development of high-density functional near infrared spectroscopy for traumatic brain injury. Ph.D. thesis, University of Birmingham.

Clark, Daniel (2012) Net shape engineering for high performance aerospace applications: targeted development of novel technologies for aerospace near net shape combustor module applications. Eng.D. thesis, University of Birmingham.

Clark, Peter (2016) Towards in-situ characterisation of formulated products. Eng.D. thesis, University of Birmingham.

Clinton, Thomas (2017) Electrokinetic stabilisation as a subsidence remediation technique. Ph.D. thesis, University of Birmingham.

Clipsham, Timothy Jack (2010) The replication of micron scale pillar arrays for medical ultrasound applications. Ph.D. thesis, University of Birmingham.

Cogswell, Daniel J. (2010) Statistical modelling of the transition toughness properties of low alloy pressure vessel steels. Eng.D. thesis, University of Birmingham.

Cole, Pamela Anne (2013) Cleaning of toothpaste from process equipment by fluid flow at laboratory and pilot scales. Eng.D. thesis, University of Birmingham.

Collins, Christopher Ian (2009) The atomic basis for metal-DNA signalling in CUER. Ph.D. thesis, University of Birmingham.

Collins, David John (2010) Damage detection in composite materials using acoustic emission and self-sensing fibres. M.Res. thesis, University of Birmingham.

Collins, Glen Steven (2014) On the fitting height of soluble groups. Ph.D. thesis, University of Birmingham.

Collins, Neil J (2011) A study of tau lepton production in tt events with ATLAS at the LHC. Ph.D. thesis, University of Birmingham.

Collins, Niki Jane (2011) Construction of novel tissue engineering scaffolds using supercritical fluid gas foaming. Ph.D. thesis, University of Birmingham.

Compton, David (2012) Effects of acrylic acid on ITO coated polymer substrates for flexible displays. M.Res. thesis, University of Birmingham.

Constandinides, George (2014) Thermal management and control of a homogeneous charge compression ignition (HCCI) engine. Ph.D. thesis, University of Birmingham.

Cook, Andrew James (2011) Computational chunking in Chess. Ph.D. thesis, University of Birmingham.

Cook, Louise (2012) Low temperature active-screen plasma surface alloying of precipitation hardening stainless steels. M.Res. thesis, University of Birmingham.

Cook, Stuart (2010) The optimisation of the enzyme linked immunosorbant assay (ELISA) for thyroid peroxidase autoantibodies (TPO) autoantibodies (aAbs). M.Res. thesis, University of Birmingham.

Cookson, Nikki Jade (2010) Preparation and characterization of bimetallic core-shell nanoparticles. M.Res. thesis, University of Birmingham.

Cooley, Oliver Josef Nikolaus (2010) Embedding Problems for Graphs and Hypergraphs. Ph.D. thesis, University of Birmingham.

Cooper, Cerise Jemma (2014) Acoustics and friction of apparel and model fabrics, and consumer perceptions of fabric sounds. Ph.D. thesis, University of Birmingham.

Cooper, James (2015) Managing phosphorus in the UK water industry to increase national resource security. Ph.D. thesis, University of Birmingham.

Corcalciuc, Horia V. (2014) Taxonomies for software security. Ph.D. thesis, University of Birmingham.

Corrie, Benjamin (2015) Synthesis and structural characterisation of solid oxide fuel cell materials. Ph.D. thesis, University of Birmingham.

Corujeira Gallo, Santiago (2009) Active screen plasma surface engineering of austenitic stainless steel for enhanced tribological and corrosion properties. Ph.D. thesis, University of Birmingham.

Cosentino, Francesco (2013) Heat treatment of nickel based superalloys for turbine blade application: modelling and validation. Ph.D. thesis, University of Birmingham.

Costard, Emmanuelle Marion (2017) Control of fat crystallisation by adding additives and changing the process. Ph.D. thesis, University of Birmingham.

Costello, Cait (2012) Horizontal gene transfer in bacterial co-cultures in micro-fabricated environments. Ph.D. thesis, University of Birmingham.

Courtney, James Matthew (2017) Alternative chemical methods for the catalytic processes within hydrogen fuelled proton exchange membrane fuel cells. Ph.D. thesis, University of Birmingham.

Courtney, James Matthew (2011) Bio-engineered gas diffusion electrodes (GDEs) for proton exchange membrane fuel cells (PEMFCs). M.Res. thesis, University of Birmingham.

Cousins, Benjamin Thomas Spencer (2013) The effects of damage on high pressure gas turbine disc alloys. M.Res. thesis, University of Birmingham.

Cowell, Adam (2011) An investigation into the synthesis, structural characterisation, thermal and polymorphic behaviour of organic crystalline materials. Ph.D. thesis, University of Birmingham.

Cox, Michael (2014) On sets, games and processes. Ph.D. thesis, University of Birmingham.

Cremonesi, Alex (2013) Gold catalysed intermolecular atom transfer reactions on heteroatom-substituted alkynes. Ph.D. thesis, University of Birmingham.

Crick, Peter John (2011) Towards the total synthesis of asperparaline C. Ph.D. thesis, University of Birmingham.

Crisan, Ioan Adrian (2013) Vortex matter, dynamics and pinning in superconducting materials. D.Sc. thesis, University of Birmingham.

Critchley, Liam John (2016) The scale up of air-filled emulsion production. M.Sc. thesis, University of Birmingham.

Cross, Benjamin (2014) GCS approximation. Ph.D. thesis, University of Birmingham.

Cross, James Dorian (2014) Low-frequency electromagnetic fields for the detection of buried objects in the shallow sub-surface. Ph.D. thesis, University of Birmingham.

Crowcombe, James Edward (2017) Larval zebrafish electrocardiography electrodynmaic modelling and sensor design. Ph.D. thesis, University of Birmingham.

Cruchley, Sam (2015) The oxidation damage of Ni-based superalloy, RR1000, with different surface modifications and the role of oxidation in fatigue crack initiation. Ph.D. thesis, University of Birmingham.

Cuddy, Martin (2014) Size-selected molybdenum disulfide clusters for hydrogen evolution. Ph.D. thesis, University of Birmingham.

Cudré, Yanouk (2017) Tris-heteroleptic iridium complexes for white emission. Ph.D. thesis, University of Birmingham.

Cui, Xilin (2013) Numerical simulation of internal fluidisation and cavity evolution due to a leaking pipe using the coupled DEM-LBM technique. Ph.D. thesis, University of Birmingham.

Culver, Robert Alan (2017) Collective strong coupling of cold potassium atoms in an optical ring cavity. Ph.D. thesis, University of Birmingham.

Cumby, James (2014) Experimental and computational studies of low-dimensional functional materials. Ph.D. thesis, University of Birmingham.

Curioni, Giulio (2013) Investigating the seasonal variability of electromagnetic soil properties using field monitoring data from Time-Domain Reflectometry probes. Ph.D. thesis, University of Birmingham.

Curnick, Oliver J. (2012) Ionomer-stabilised Pt and Pt-Ti bimetallic electrocatalysts for the proton exchange membrane fuel cell. Ph.D. thesis, University of Birmingham.

Curtis, Christopher J (2010) Development of the detector control system for the ATLAS Level-1 trigger and measurement of the single top production cross section. Ph.D. thesis, University of Birmingham.

Curtis, David Thomas (2011) Point grinding and electrolytic point grinding of Udimet 720. Ph.D. thesis, University of Birmingham.

Curtiss, Geoffrey Aylwyn (2009) Non-linear, non-spherical bubble dynamics near a two fluid interface. Ph.D. thesis, University of Birmingham.

Cury Marques, Fabricio (2016) Carbon dioxide capture and utilisation for biocomposites. Ph.D. thesis, University of Birmingham.

Cutts, Geoffrey (2017) Radiation damage in xenotime: an atomistic modelling and x-ray total scattering study. Ph.D. thesis, University of Birmingham.

D

D'Souza, Rhys (2010) Synthesis and characterisation of materials with potential multiferroic behaviour. M.Res. thesis, University of Birmingham.

Dai, Linsha (2016) Intelligent real-time train rescheduling management for railway system. Ph.D. thesis, University of Birmingham.

Dakkama, Hassan Jawdat Fadhiel (2017) Experimental investigation of MOF adsorption system for ice making, freeze water desalination and cooling applications. Ph.D. thesis, University of Birmingham.

Dale, Peter (2015) An investigation into organocatalytic Michael additions. M.Sc. thesis, University of Birmingham.

Dale, Steven (2014) A novel cfd-based approach for optimisation of the directional solidification process. Eng.D. thesis, University of Birmingham.

Dandy, Luke (2015) Supercritical fluids and their application to the recycling of high-performance carbon fibre reinforced composite materials. Ph.D. thesis, University of Birmingham.

Danesh Sedigh, Yalda (2013) Development and validation of technology acceptance modelling for evaluating user acceptance of an e-learning framework. M.Phil. thesis, University of Birmingham.

Dang, Van-Son (2011) Nanotechnology of pinning centres in high temperature superconducting YBa2Cu3O7 films. Ph.D. thesis, University of Birmingham.

Daniel, Liam Yannick (2017) Maritime forward scatter radar. Ph.D. thesis, University of Birmingham.

Daniel, Ritchie Lewis (2012) Combustion and emissions performance of oxygenated fuels in a modern spark ignition engine. Ph.D. thesis, University of Birmingham.

Daniells, Andrew Christopher (2016) Pile-up suppression in the ATLAS level 1 calorimeter trigger and searches for Higgs Boson pair production. Ph.D. thesis, University of Birmingham.

Danks, Ashleigh Edwards (2017) Biopolymer synthesis of pourous carbon nanocomposites. Ph.D. thesis, University of Birmingham.

Dapelo, Davide (2016) Gas mixing in anaerobic digestion. Ph.D. thesis, University of Birmingham.

Dariush, Aliakbar (2009) Galaxy groups from observations and simulations. Ph.D. thesis, University of Birmingham.

Daus, Friedrich Herbert (2010) Process, microstructure and property relationships in dissimilar nickel base superalloy inertia friction welds. Ph.D. thesis, University of Birmingham.

Davies, Allison Bridget Mary (2015) Mathematical modelling of the fluid dynamics involved in colonic mixing with applications to drug delivery. Ph.D. thesis, University of Birmingham.

Davies, Amy (2014) Imaging of platelet actin nodule with high spatial and temporal resolution. Ph.D. thesis, University of Birmingham.

Davies, Dita (2011) Design of shell-type ligands for luminescent lanthanide complexes. Ph.D. thesis, University of Birmingham.

Davies, Guy R. (2011) Investigating the low-frequency stability of BiSON's resonant scattering spectrometers. Ph.D. thesis, University of Birmingham.

Davies, Owain (2010) Application of Femtosecond lasers in confocal and scanning tunnelling microscopy. Ph.D. thesis, University of Birmingham.

Davies, Rosalind (2016) Lithium amide halides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Davis, Amelia (2014) The characterisation and assessment of curvature in asymmetric carbon fibre composite laminates. M.Phil. thesis, University of Birmingham.

Davis, Andrew (2010) Radiation Shielding of Fusion Systems. Ph.D. thesis, University of Birmingham.

Davis, Jack B. A. (2015) Elucidating the structures and catalytic properties of metallic nanoparticles. Ph.D. thesis, University of Birmingham.

Dawes, Jason (2014) Studies on the lubrication of roller compaction formulations. Eng.D. thesis, University of Birmingham.

De, Sandip (2011) Tracking translation factors in fission yeast nucleus. Ph.D. thesis, University of Birmingham.

De Bono, Paola (2016) Laser welding of copper and aluminium alloys for electrical interconnects. Eng.D. thesis, University of Birmingham.

De La Torre Gutiérrez, Héctor (2017) A modelling-oriented scheme for control chart pattern recognition. Ph.D. thesis, University of Birmingham.

Dear, Matthew Nicholas (2016) Fatigue in SiC fibre reinforced titanium metal matrix composites. Eng.D. thesis, University of Birmingham.

Dearn, Sophie Clare (2015) Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications. Ph.D. thesis, University of Birmingham.

Decoster, Thibault (2013) Stabilising alloys in non-equilibrium crystal structures by epitaxial growth. Ph.D. thesis, University of Birmingham.

Defaut, benedicte (2011) Studies towards the total synthesis of dictyoxetane. Ph.D. thesis, University of Birmingham.

Degri, Malik John Jamaji (2014) The processing and characterisation of recycled NdFeB-type sintered magnets. Ph.D. thesis, University of Birmingham.

Del Pozzo, Walter (2010) Black Holes, Galaxy Clusters and Gravitational Waves. Ph.D. thesis, University of Birmingham.

Del Valle Perez-Solero, Nahia (2012) Measurement and analysis of slipstreams for passenger trains. Ph.D. thesis, University of Birmingham.

Deng, Jingchao (2014) Robust damping control of power systems with FACTS. Ph.D. thesis, University of Birmingham.

Deng, Na (2015) DC-DC converters for current flow control, voltage conversion and integration of energy storage systems in DC grids. Ph.D. thesis, University of Birmingham.

Deng, Sunan (2016) Nanophotonic devices based on graphene and carbon nanotubes. Ph.D. thesis, University of Birmingham.

Dent, Philip Nigel (2016) Evaluation of the seabed temperature corrosion and sulphide stress cracking (SSC) resistance of weldable martensitic 13% chromium stainless steel (WMSS). M.Phil. thesis, University of Birmingham.

Detty-Mambo, Christelle (2011) Gold-catalysed cycloisomerisations of ketoalkynes. Ph.D. thesis, University of Birmingham.

Dhukaram, Anandhi Vivekanandan (2016) CISDA Development Process for decision aids to support self-care decision making. Ph.D. thesis, University of Birmingham.

Diamantopoulos, Georgios (2010) Novel eye feature extraction and tracking for non-visual eye-movement applications. Ph.D. thesis, University of Birmingham.

Dinh, Duc Dang (2017) Millimetre-wave power sensor design. Ph.D. thesis, University of Birmingham.

Dinh, Tien Tuan Anh (2010) Trustworthy infrastructure for Peer-to-Peer applications using hardware based security. Ph.D. thesis, University of Birmingham.

Ditalelo, Gofetamang (2017) The role of cobalt and nickel in biogas production from anaerobic digestion of acetate. Ph.D. thesis, University of Birmingham.

Dixon, George (2011) The mechanical stability of instrumentation for gravitational wave detection. Ph.D. thesis, University of Birmingham.

Doan, Vinh Thi Thuy (2013) Integrated design solution of a residential structural insulated panel dwelling. Ph.D. thesis, University of Birmingham.

Dobney, Kay (2010) Quantifying the effects of an increasingly warmer climate with a view to improving the resilience of Great Britain's railway network: Is a new stressing regime the answer? Ph.D. thesis, University of Birmingham.

Dong, Yangchun (2011) Towards multi-functional stainless steel surface: plasma surface alloying with N, Ag and Cu. Ph.D. thesis, University of Birmingham.

Dooley, Gavin (2017) Shell improvements for the investment casting of orthopaedic implants. Ph.D. thesis, University of Birmingham.

Dorey, Shaun (2016) Fabrication and characterisation of nickel manganite thin films by pulsed laser deposition. Ph.D. thesis, University of Birmingham.

Dorigatti, Francesco (2013) Rail vehicles in crosswinds: analysis of steady and unsteady aerodynamic effects through static and moving model tests. Ph.D. thesis, University of Birmingham.

Dosanjh, Ardeep (2010) Investigating the redispersibility of calcium carbonate. M.Res. thesis, University of Birmingham.

Dou, Wenbo (2014) Surface modification of lean duplex stainless steels by low temperature plasma nitriding. M.Res. thesis, University of Birmingham.

Dowle, Miriam (2014) High resolution electron microscopy of biological systems. Ph.D. thesis, University of Birmingham.

Doyle, Richard John-Paul (2016) An investigation into the hydrogen embrittlement susceptibility of experimental 304 stainless steel alloys modified with ruthenium and palladium additions. Ph.D. thesis, University of Birmingham.

Driscoll, Laura Louise (2017) Synthesis, characterisation and modification of materials for Na-ion batteries. Ph.D. thesis, University of Birmingham.

Du, Jinlong (2017) Development of high strength hot rolled strip steel products with bainitic microstructures. Ph.D. thesis, University of Birmingham.

Du, Jinlong (2012) Examination of the effect of tin particles and grain size on the charpy impact transition temperature in steels. M.Res. thesis, University of Birmingham.

Du, Mingming (2017) Mechanical characterization of therapeutic cells and physical property-based sorting in microfluidic systems. Ph.D. thesis, University of Birmingham.

Du Plessis, Rachel Frances (2017) Hydrogen storage properties of nitrogen- and halogen- containing materials. Ph.D. thesis, University of Birmingham.

Duff, Damien Jade (2011) Visual motion estimation and tracking of rigid bodies by physical simulation. Ph.D. thesis, University of Birmingham.

Duffus, Laudina Jeneise (2017) Edible pickering emulsion technology: fabrication of edible particle stabilised double emulsions. Eng.D. thesis, University of Birmingham.

Duffy, Thomas Joseph (2016) Collaborative sensemaking. Ph.D. thesis, University of Birmingham.

Duprey, Jean-Louis Henry Alan (2011) Studies on Anthracene Tagged Oligonucleotides. Ph.D. thesis, University of Birmingham.

Durrant, Alec James (2014) The effect of microstructure and composition on HDDR processing of scrap magnets. M.Res. thesis, University of Birmingham.

Durrant, Robert John (2013) Learning in high dimensions with projected linear discriminants. Ph.D. thesis, University of Birmingham.

Dusara, Sunny (2011) Radio-over-fibre systems for body-centric communication measurements. M.Res. thesis, University of Birmingham.

Dutton, Mark Jason (2016) Synthesis and application of stereogenic nitrogen-containing ammonium salts as phase-transfer catalysts. Ph.D. thesis, University of Birmingham.

Dymond, Michael Robert (2014) Differentiability and negligible sets in Banach spaces. Ph.D. thesis, University of Birmingham.

Dzidek, Brygida Maria (2017) Tribological interactions of the finger pad and tactile displays. Ph.D. thesis, University of Birmingham.

de Laune, Benjamin Paul (2013) Low dimensional structures of some mixed metal oxides containing antimony: synthesis and characterisation. Ph.D. thesis, University of Birmingham.

di Bari, Vincenzo (2015) Large deformation and crystallisation properties of process optimised cocoa butter emulsions. Ph.D. thesis, University of Birmingham.

du Plessis, Andrew (2012) Low temperature plasma surface modification of stainless steels for ice sliding applications. M.Res. thesis, University of Birmingham.

du Plessis, Andrew (2015) Studies on Atmospheric Corrosion Processes in AA2024. Ph.D. thesis, University of Birmingham.

E

Easton, John M. (2009) Optimised analysis and visualisation of metabolic data using graph theoretical approaches. Ph.D. thesis, University of Birmingham.

Ebrahimi, Elham (2012) Wideband and reconfigurable antennas for emerging wireless networks. Ph.D. thesis, University of Birmingham.

Eckold, David Geoffrey (2016) Spinal implants - the problems of debris. Ph.D. thesis, University of Birmingham.

Edeh, Ifeanyichukwu (2016) A critical evaluation of the utility of subcritical water to support the production of biodiesel and renewable diesel from the lipid fraction of activated sludge. Ph.D. thesis, University of Birmingham.

Eesa, Muhammad (2009) CFD studies of complex fluid flows in pipes. Ph.D. thesis, University of Birmingham.

Eftekhari, Sashah (2011) Augmented reality and scene examination. Ph.D. thesis, University of Birmingham.

Eghbal Behbahani, Shiva (2015) Microwave power detectors. M.Sc. thesis, University of Birmingham.

El-Hofy, Mohamed Hassan (2014) Milling/routing of carbon fibre reinforced plastic (CFRP) composites. Ph.D. thesis, University of Birmingham.

El-Kharouf, Ahmad (2014) Understanding GDL properties and performance in polymer electrolyte fuel cells. Ph.D. thesis, University of Birmingham.

El-Sayed, Mahmoud Ahmed Mahmoud (2012) Double oxide film defects and mechanical properties in aluminium alloys. Ph.D. thesis, University of Birmingham.

El-Shinawi, Hany Zakaria Ibrahim (2010) Synthesis and characterization of cobalt-containing perovskite-type oxides. Ph.D. thesis, University of Birmingham.

Eldbib, Khaled (2016) Design and analysis of rule induction systems. Ph.D. thesis, University of Birmingham.

Elgalhud, Abdurrahman Ahmed T. A. (2017) Durability potential of Portland limestone cement concrete. Ph.D. thesis, University of Birmingham.

Elgharib, Maged El-Mabruk (2015) TPM implementation in the UK and Libya. Ph.D. thesis, University of Birmingham.

Elhabbash, Abdessalam (2017) Engineering self-awareness with knowledge management in dynamic systems: a case for volunteer computing. Ph.D. thesis, University of Birmingham.

Elhalhuli, Essam Othman (2010) A study of medium induced jet modificaiton at the relativistic heavy ion collider via two particle correlations and identified jet spectra. Ph.D. thesis, University of Birmingham.

Elliott, Bruce Jeffrey (2014) Benefits of adopting systems engineering approaches in rail projects. Ph.D. thesis, University of Birmingham.

Ellis, Robert Joseph (2017) Realising the potential of rich energy datasets. Ph.D. thesis, University of Birmingham.

Elsayed, Ahmed Mohamed (2011) Heat transfer in helically coiled small diameter tubes for miniature cooling systems. Ph.D. thesis, University of Birmingham.

Elsby, Daniel (2013) The rare decay of $$\Lambda$$$$_b$$ $$\rightarrow$$ $$\Lambda$$$$^0$$$$\mu$$$$^+$$$$\mu$$$$^-$$ with the LHCb detector at CERN. M.Phil. thesis, University of Birmingham.

Elvidge, Sean (2014) On the use of multi-model ensemble techniques for ionospheric and thermospheric characterisation. Ph.D. thesis, University of Birmingham.

Embaye, Mebrahtu (2016) Enhancement of panel radiator based hydronic central heating system using flow pulsation. Ph.D. thesis, University of Birmingham.

Embleton, Nina Lois (2015) Handling sparse spatial data in ecological applications. Ph.D. thesis, University of Birmingham.

Embrey, Christopher (2016) Controlling local quantum fluctuations of light using four-wave mixing in an atomic vapour. Ph.D. thesis, University of Birmingham.

Entezami, Mani (2013) Novel operational condition monitoring techniques for wind turbine brake systems. Ph.D. thesis, University of Birmingham.

Ero-Phillips, Olubayode Oladiran (2012) Development of bi- and multicomponent fibres for tissue engineering by electrospinning. Ph.D. thesis, University of Birmingham.

Esgandari, Mohammad (2015) Simulation methods for vehicle disc brake noise, vibration & harshness. Ph.D. thesis, University of Birmingham.

Eskandari Torbaghan, Mehran (2016) A risk based approach for trading renewable electricity. Ph.D. thesis, University of Birmingham.

Eslami, Farshad (2013) Properties, performance and emissions of biofuels in blends with gasoline. Ph.D. thesis, University of Birmingham.

Essa, Khamis Essa Ali (2011) Finite element prediction of deformation mechanics in incremental forming processes. Ph.D. thesis, University of Birmingham.

Esson, Mark David (2015) Applications of cavitation dynamics in a three fluid system. Ph.D. thesis, University of Birmingham.

Etebari, Dina (2014) Intelligent wardrobe: using mobile devices, recommender systems and social networks to advise on clothing choice. M.Phil. thesis, University of Birmingham.

Evans, Ian Christopher (2011) Metallated derivatives of ammonia borane with a view to their potential as hydrogen storage materials. Ph.D. thesis, University of Birmingham.

Evans, Rhianne (2015) I am because we are: a systems approach to strategy design. Ph.D. thesis, University of Birmingham.

Ewert, Stephanie (2017) Development of robust expanded bed adsorption processes for CGMP manufacture of biopharmaceutical products. Ph.D. thesis, University of Birmingham.

F

Fairbairn, Benjamin Thomas (2009) On the symmetric generation of finite groups. Ph.D. thesis, University of Birmingham.

Faniyi, Funmilade Olugbenga (2015) Self-aware software architecture style and patterns for cloud-based applications. Ph.D. thesis, University of Birmingham.

Farabi, Shiva (2012) Luminescent assemblies based on surface active transition metal complexes and supramolecular host-guest systems. Ph.D. thesis, University of Birmingham.

Farah, Ali Mohamud (2012) Generalized and quadratic eigenvalue problems with hermitian matrices. M.Phil. thesis, University of Birmingham.

Faraji-Rad, Zahra (2016) Microneedles Fabrication for Subcutaneous Fluid Sampling and Drug Delivery. Ph.D. thesis, University of Birmingham.

Faramehr, Samane (2014) Aerodynamic of the trains in tunnels. M.Res. thesis, University of Birmingham.

Farmer, James (2009) A comparison of conventional heating techniques and microwave irradiation for the desorption of lithium borohydride and lithium borohydride composites. M.Eng. thesis, University of Birmingham.

Farr, Matthew (2013) A study on the impact of surface and bulk oxidation on the recyclability of NdFeB magnets. M.Res. thesis, University of Birmingham.

Farron, Victoria Jane (2010) Effects of microstructure and strain ageing on toughness of nuclear PWR reactor weld metals. Ph.D. thesis, University of Birmingham.

Fascianelli, Valeria (2016) Development of a software trigger algorithm for electron identification using the NA62 RICH Cherenkov detector. M.Sc. thesis, University of Birmingham.

Fayad, Mohammed Ali (2017) Particulate Matter (PM) characteristics from compression ignition diesel engines operated by renewable fuels. Ph.D. thesis, University of Birmingham.

Fazal, Tabasum (2011) High temperature studies of sodalites. M.Res. thesis, University of Birmingham.

Fellows, Jonathan Michael (2013) Realization of a striped superfluid with ultracold dipolar bosons: phase competition, symmetry enhancement and vortex softening. Ph.D. thesis, University of Birmingham.

Fendoni, Alessandro (2010) The effect of post weld heat treatment on the corrosion behaviour of a AA2050T34-FSW. M.Res. thesis, University of Birmingham.

Feng, Siqiao (2015) Development of an antimicrobial cement using human defensins-like antimicrobial peptides. M.Res. thesis, University of Birmingham.

Fennell, Daniel Alexander (2014) Exhaust gas fuel reforming for improved gasoline direct injection engine efficiency and emissions. Ph.D. thesis, University of Birmingham.

Fennell, John (2013) The electrochemistry of surfactants on gold single-crystals and of platinum-gold nanorods. Ph.D. thesis, University of Birmingham.

Fereshteh Saniee, Nessa (2010) Structural, electrical and optical properties of transparent conducting Si-doped ZnO thin films grown by pulsed laser deposition. M.Phil. thesis, University of Birmingham.

Ferley, Simon Julius John (2014) An examination of the effects of geological and glacigenic controls on the engineering properties of till using a domain based approach. Ph.D. thesis, University of Birmingham.

Fernandez-Gonzalez, Angel (2012) Stabilization of functional ingredients by microencapsulation:Interfacial polymerisation. Ph.D. thesis, University of Birmingham.

Fernández Farrés, Isabel (2015) Fluid gel production and tribological behaviour of alginate and agar. Eng.D. thesis, University of Birmingham.

Fernández del Río, Raquel (2017) Identification of volatile organic compounds in breath associated with liver disease and their potential applications for medical use. Ph.D. thesis, University of Birmingham.

Feula, Antonio (2013) Synthesis of azetidines and pyrrolidines: towards medicinal chemistry and organocatalysis applications. Ph.D. thesis, University of Birmingham.

Fielder, Andrew Thomas (2013) The effect of pricing rules on a constrained wholesale electricity market: an agent based approach. Ph.D. thesis, University of Birmingham.

Figliola, Carlotta (2015) [FeFe]-Hydrogenase synthetic mimics based on peri-substituted dichalcogenides. Ph.D. thesis, University of Birmingham.

Fiorini, Francesca (2012) Experimental and computational dosimetry of laser-driven radiation beams. Ph.D. thesis, University of Birmingham.

Firkin, Adam (2015) Connectivity of Hurwitz spaces for $$L$$$$_2$$(7), $$L$$$$_2$$(11) and $$S$$$$_4$$. Ph.D. thesis, University of Birmingham.

Fisk, Joseph Charles (2013) Effects of creep and oxidation interaction on high temperature crack growth behaviour of nickel based superalloys. Ph.D. thesis, University of Birmingham.

Fitzgerald, Annabel Victoria Lucy (2017) Preparation, characterisation and secondary crystallisation of PHB based copolymers and carbohydrate blends. Ph.D. thesis, University of Birmingham.

Flatres, Simon (2011) The theory of Coulomb Drag in Graphene Systems. Ph.D. thesis, University of Birmingham.

Fletcher, Sean (2010) Thin film Palladium-Ytrium membranes for hydrogen separation. Ph.D. thesis, University of Birmingham.

Fletcher-Wood, Rowena (2015) Zeolites and other molecular sieves for chromate remediation. Ph.D. thesis, University of Birmingham.

Flight, Rachel Catharine (2017) Novel approaches for image analysis of in vitro epithelial cultures with application to silver nanoparticle toxicity. Ph.D. thesis, University of Birmingham.

Flynn, Dominic (2015) A numerical investigation of the effect of crosswinds on the slipstream of a model-scale freight train and associated effects. Ph.D. thesis, University of Birmingham.

Folorunso, Olatunji Peter (2015) Physically and numerically modelling turbulent flow in a patchy vegetated open channel. Ph.D. thesis, University of Birmingham.

Fonseca, Monica Rosalia Jaime (2012) An engineering understanding of the small intestine. Ph.D. thesis, University of Birmingham.

Forde, John (2015) The elevated temperature performance of cast aluminium alloys and the development of a cast aluminium-copper metal matrix composite. Eng.D. thesis, University of Birmingham.

Formosa, Dennis (2015) Development of long-lasting antibacterial S-phase based coatings for medical devices. Ph.D. thesis, University of Birmingham.

Foster, Dawn Michelle (2017) Production and characterisation by scanning transmission electron microscopy of size-selected noble metal nanoclusters. Ph.D. thesis, University of Birmingham.

Fotoohi, Babak (2011) A study of mechanochemical activation in solid-state synthesis of advanced ceramic composites. M.Phil. thesis, University of Birmingham.

Fouad, Shereen (2013) Metric learning for incorporating privileged information in prototype-based models. Ph.D. thesis, University of Birmingham.

Frackowiak, Marcin (2010) Modelling and diagnostic study of flow in an optical engine with negative valve overlapping for homogeneous charge compression ignition. Ph.D. thesis, University of Birmingham.

Francia Garcia, Victor (2015) Spray drying of detergents in counter current towers: a study of turbulent swirling flows, fouling and agglomeration. Eng.D. thesis, University of Birmingham.

Frasch-Melnik, Sarah (2011) Fat crystal-stabilised double emulsions. Ph.D. thesis, University of Birmingham.

Fredriksson, Olle (2015) Distributing abstract machines. Ph.D. thesis, University of Birmingham.

Freer, Ashleigh Elizabeth (2017) Development of novel molecular probes and synchrotron imaging techniques to study the uptake of metallo-cylinder drugs. Ph.D. thesis, University of Birmingham.

Friend, Gareth William (2014) The effect of defects on the mechanical properties of fibre reinforced titanium metal matrix composites under fatigue loading. Eng.D. thesis, University of Birmingham.

Frommhold, Andreas (2011) Nanotexturisation of gold surfaces and its application to neural implants. Ph.D. thesis, University of Birmingham.

Frost, Robert (2015) The recovery of kish graphite from secondary sources. M.Res. thesis, University of Birmingham.

Fu, Hao (2017) Market-oriented micro virtual power prosumers operations in distribution system operator framework. Ph.D. thesis, University of Birmingham.

Fu, Haobo (2014) Finding robust solutions against environmental changes. Ph.D. thesis, University of Birmingham.

Fu, Xin (2012) Active screen plasma surface modification of polymeric materials for biomedical application. Ph.D. thesis, University of Birmingham.

Fulda, Paul (2012) Precision interferometry in a new shape: higher-order Laguerre-Gauss modes for gravitational wave detection. Ph.D. thesis, University of Birmingham.

Fyn-Sydney, Betty Iboroma (2013) Phan geometries and error correcting codes. Ph.D. thesis, University of Birmingham.

G

Gabr, Hend Mohammed Kamel Mohammed (2016) Investigating poverty and labour force participation among older population in Egypt: a multilevel simultaneous equations modeling approach. Ph.D. thesis, University of Birmingham.

Gabriele, Andrea (2011) Fluid Gels: formation, production and lubrication. Ph.D. thesis, University of Birmingham.

Galda, Alexey (2013) Electronic properties of Luttinger Liquid with electron-phonon interaction. Ph.D. thesis, University of Birmingham.

Galileu Speranza, Lais (2017) Development of a new route for direct conversion of wet algae to biodiesel. Ph.D. thesis, University of Birmingham.

Gallagher, Martin (2017) Experimental investigation of the aerodynamics of a class 43 high speed train. Ph.D. thesis, University of Birmingham.

Gallagher, Meurig Thomas (2015) The initial development of a jet caused by fluid, body and free surface interaction. Ph.D. thesis, University of Birmingham.

Gao, Jianzhi (2013) Structural analysis of self‐assembled monolayers on Au(111) and point defects on HOPG. Ph.D. thesis, University of Birmingham.

Gao, Xiang (2017) Antenna designs based on metamaterial-inspired structures. Ph.D. thesis, University of Birmingham.

Gao, Yuqing (2017) User-oriented markerless augmented reality framework based on 3D reconstruction and loop closure detection. Ph.D. thesis, University of Birmingham.

Garcia, Adrian Dante (2017) Neural correlates of visual perceptual learning and inhibitory neurotransmitter in humans using magnetic resonance spectroscopy. Ph.D. thesis, University of Birmingham.

Garcia Diaz, Yoel R (2010) Synthesis of Novel Glycolipid Agonists of the Protein CD1d. Ph.D. thesis, University of Birmingham.

Garcia Najera, Abel (2010) Multi-Objective evolutionary algorithms for vehicle routing problems. Ph.D. thesis, University of Birmingham.

Garrec, David (2013) Understanding fluid gels and hydrocolloid tribology. Eng.D. thesis, University of Birmingham.

Garzon Sanz, Miguel (2016) Developing nucleophilic nitrenoids for the synthesis of complex heterocycles. Ph.D. thesis, University of Birmingham.

Gear, James Manning (2017) PT symmetry and exceptional points in metamaterials. Ph.D. thesis, University of Birmingham.

Geepalla, Emsaieb Mosbah (2013) Model-driven approaches to analysing time- and location- dependent access control specifications. Ph.D. thesis, University of Birmingham.

George, Elizabeth (2012) Seismic investigations of the sun and solar-like stars. M.Phil. thesis, University of Birmingham.

Gerba, Negassa Sori (2012) Investigation of mircowave tri-resonator structures. M.Res. thesis, University of Birmingham.

Gerrard, Alexander James (2014) Inclusions and hydrogen and their effects on the quality of direct chill cast and flat rolled aluminium alloys for aerospace applications. Eng.D. thesis, University of Birmingham.

Ghahari, Seyed Majid (2012) In situ synchrotron x-ray characterisation and modelling of pitting corrosion of stainless steel. Ph.D. thesis, University of Birmingham.

Ghani, Zamir (2013) The physics, dosimetry and microdosimetry of boron neutron capture theraphy. Ph.D. thesis, University of Birmingham.

Ghataore, Balraj Singh (2013) The use of proton exchange membrane fuel cells (PEMFCs) in refrigerated transport for the frozen food supply chain. M.Res. thesis, University of Birmingham.

Ghatei, Davoud (2015) Spin covers of maximal compact subgroups of Kac-Moody groups and of Weyl groups. Ph.D. thesis, University of Birmingham.

Ghatei, Davoud (2013) The Octonions. M.Phil. thesis, University of Birmingham.

Ghorbanian Farah Abadi, Sara (2017) The role of rheology in the flow and mixing of complex fluids. M.Phil. thesis, University of Birmingham.

Ghosh, Siddharth (2012) Investigation of techniques for the surface roughness characterisation of bovine articular cartilage. M.Phil. thesis, University of Birmingham.

Ghufran, Syed Muhammad (2010) The computation of matrix functions in particular, the matrix exponential. M.Phil. thesis, University of Birmingham.

Gianniotis, Nikolaos (2008) Visualisation of structured data through generative probabilistic modeling. Ph.D. thesis, University of Birmingham.

Gil-García, Álvaro Antonio (2017) Thermodynamic behaviour of supercritical water as working fluid in advanced coal-fired power plants: simulation and design study. Ph.D. thesis, University of Birmingham.

Gilbert, Timothy (2014) Aerodynamic effects of high speed trains in confined spaces. Ph.D. thesis, University of Birmingham.

Gill, Christopher (2017) Simulating transport through quantum networks in the presence of classical noise using cold atoms. Ph.D. thesis, University of Birmingham.

Gill, Simaranjit Singh (2012) Controlling diesel NOx & PM emissions using fuel components and enhanced aftertreatment techniques: developing the next generation emission control system. Ph.D. thesis, University of Birmingham.

Gillie, Andrew Duncan (2015) Synthesis and applications of 4N-substituted oxazoles. Ph.D. thesis, University of Birmingham.

Gillone, Melissa (2016) The evolution of galaxies in groups: how galaxy properties are affected by their group properties. Ph.D. thesis, University of Birmingham.

Gittins, Adam (2011) Design of new MG-based glass forming compositions using liquidus temperaure calculations correlated with an elastic strain model. M.Res. thesis, University of Birmingham.

Giusti, Gaël (2011) Deposition and characterisation of functional ITO thin films. Ph.D. thesis, University of Birmingham.

Gkantou, Michaela (2017) Response and design of high strength steel structures employing square and rectangular hollow sections. Ph.D. thesis, University of Birmingham.

Gleixner, Renate Maria (2012) Asymmetric organocatalytic allylation of acetals. Ph.D. thesis, University of Birmingham.

Glynn, David William (2017) Terahertz frequency doubling circuits for communications. Ph.D. thesis, University of Birmingham.

Goddard, Russell (2017) Commuting varieties and nilpotent orbits. Ph.D. thesis, University of Birmingham.

Goh, Jonathan (2014) Novel electrocatalyst supports for polymer electrolyte fuel cells. M.Res. thesis, University of Birmingham.

Gomo, Panganai (2011) A discrete graph Laplacian for signal processing. M.Phil. thesis, University of Birmingham.

González-Méndez, Ramón (2017) Development and applications of proton transfer reaction-mass spectrometry for homeland security: trace detection of explosives. Ph.D. thesis, University of Birmingham.

Goode, Kylee Rebecca (2012) Characterising the cleaning behaviour of brewery foulants - to minimise the cost of cleaning in place operations. Eng.D. thesis, University of Birmingham.

Goss, Kym Jeanette Frances (2012) Asteroseismology of beta Cephei and Be type stars. Ph.D. thesis, University of Birmingham.

Gouseti, Ourania (2012) Development and evaluation of a device for optimum quality simultaneous rheological and morphological characterisation of complex fluids. Ph.D. thesis, University of Birmingham.

Grazian, Valentina (2017) Fusion systems on $$p$$-groups of sectional rank 3. Ph.D. thesis, University of Birmingham.

Green, Alistair John (2017) The characterisation and producton of protein coated air-cells and their use supplimenting whipped creams and emulsions. Eng.D. thesis, University of Birmingham.

Green, Claire Louise (2017) Computational simulations of pure ThO2 and Th(1-x)U(x)O2 and Th(1-x)Pu(x)O2 doped systems for nuclear fuel applications. Ph.D. thesis, University of Birmingham.

Green, Naomi Charlotte (2017) Evaluation of ceramics as a material for Total Disc Replacements. Ph.D. thesis, University of Birmingham.

Greenwood, Thomas (2015) An investigation into the removal of oxide films from molten A20X with the use of rotary impellor degassing. M.Res. thesis, University of Birmingham.

Grewal, Gurchetan S (2015) Voting on the internet. Ph.D. thesis, University of Birmingham.

Griffith, Peter Noel (2017) First observation and branching fraction measurement of the rare decay ∧$$^0$$$$_b$$ → pKμ$$^+$$μ$$^-$$ at the LHCb experiment, CERN. Ph.D. thesis, University of Birmingham.

Griffiths, Paul Travis (2016) Hydrodynamic stability of non-Newtonian rotating boundary-layer flows. Ph.D. thesis, University of Birmingham.

Griffiths, Rian Lara-Kim (2015) Additives for improved analysis of lipids by mass spectrometry. Ph.D. thesis, University of Birmingham.

Grover, Katherine L (2015) Physics and astrophysics with gravitational waves from compact binary coalescence in ground based interferometers. Ph.D. thesis, University of Birmingham.

Guest, Robert (2011) Human factors implications of the use of technical aids during real and virtual search tasks. Ph.D. thesis, University of Birmingham.

Guggenheim, Emily Jane (2017) Development of reflectance imaging methodologies to investigate super-paramagnetic iron oxide nanoparticles. Ph.D. thesis, University of Birmingham.

Guggenheim, James A. (2014) Multi-modal diffuse optical tomography and bioluminescence tomography system for preclinical imaging. Ph.D. thesis, University of Birmingham.

Guha, Pritha (2012) On scale-scale curves for multivariate data based on rank regions. Ph.D. thesis, University of Birmingham.

Guida, Antonio (2010) Positron emission particle tracking applied to solid-liquid mixing in mechanically agitated vessels. Ph.D. thesis, University of Birmingham.

Gunawan, Budi (2010) A study of flow structures in a two-stage channel using field data, a physical model and numerical modelling. Ph.D. thesis, University of Birmingham.

Gunner, Alec Gordon (2010) The industrial development of transparent conducting coatings by a Sol-Gel route. Eng.D. thesis, University of Birmingham.

Gunson, James (2011) Effect of sensitisation on the corrosion fatigue properties of AA5456-H116. M.Res. thesis, University of Birmingham.

Gunupudi, Bindu (2015) Coupled superconducting microwave resonators for studies of electro-mechanical interaction. Ph.D. thesis, University of Birmingham.

Guo, Liya (2016) Atmospheric localised corrosion of type 304 austenitic stainless steels. Ph.D. thesis, University of Birmingham.

Guo, Mofei (2016) Multi-passband filters and tunable filters design based on coupled resonator circuits. Ph.D. thesis, University of Birmingham.

Guo, Shen (2010) The application of genetic algorithms to parameter estimation in lead-acid battery equivalent circuit models. M.Phil. thesis, University of Birmingham.

Guo, Sheng (2015) Light metal borohydrides and Mg-based hydrides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Guo, Yina (2013) Microstructure and texture characterisation of linear friction welding of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo. Ph.D. thesis, University of Birmingham.

Guo, Yu (2010) A coupled DEM/CFD analysis of die filling process. Ph.D. thesis, University of Birmingham.

Gupta, Gaurav (2015) Bimetallic Platinum-Chromium Nanoparticles as electrocatalysts for proton exchange membrane fuel cells (PEMFCs). Ph.D. thesis, University of Birmingham.

Gurney, Christopher J (2010) The stability and control of curved liquid jet break-up. Ph.D. thesis, University of Birmingham.

Gurney, Christopher James (2010) The stability and control of curved liquid jet break-up. Ph.D. thesis, University of Birmingham.

Gurusinghe, Nicola Narmada Muthumanike (2013) Synthesis and characterisation of some layered and perovskite. Ph.D. thesis, University of Birmingham.

Gómez Bardón, María del Rocío (2010) Mathematical models and simulations of complex social systems. Ph.D. thesis, University of Birmingham.

Gładkowska-Balewicz, Izabela (2017) Mixed fluid gels formation, structure and rheological properties. Ph.D. thesis, University of Birmingham.

H

Hackett, James Arthur (2011) The role of cost estimators in UK construction; a case for and steps towards an estimating profession. Ph.D. thesis, University of Birmingham.

Hackett, Louise Dawn (2014) Viability of engineered biocatalysts in biotransformation. M.Phil. thesis, University of Birmingham.

Hadjebi, Melika (2017) Investigation on triple helical cylinders' effects on human osteosarcoma U2OS cells. M.Sc. thesis, University of Birmingham.

Hadley, David Richard (2011) Search for a High Mass Higgs Boson in the Channel H - ZZ - llbb and digital filtering for the ATLAS level-1 calorimeter trigger. Ph.D. thesis, University of Birmingham.

Haenschke, Titus Paul (2013) Degradation of TiNi-based shape memory alloys (SMAs) during thermo-mechanical cycling. Ph.D. thesis, University of Birmingham.

Haider, Mohammed Ziaul (2009) A Methodology to Assess Data Variability and Risk in a Pavement Design System for Bangladesh. M.Phil. thesis, University of Birmingham.

Haines, Matthew Richard (2015) The simulation of non-synoptic effects and their implications for engineering structures. Ph.D. thesis, University of Birmingham.

Haji Samadi, Mohammad Reza (2016) Eye tracking with EEG life-style. Ph.D. thesis, University of Birmingham.

Hajiabady, Siavash (2014) Energy storage system for railway applications & analysis and modelling of electrochemical batteries for conductor rail gap DC railway. M.Res. thesis, University of Birmingham.

Hajimirzaee, Saeed (2015) Preparation, modification and characterisation of selective zeolite based catalysts for petrochemical applications. Ph.D. thesis, University of Birmingham.

Hakvoort, Gido Albert (2016) Multi-touch and mobile technologies for galleries, libraries, archives and museums. Ph.D. thesis, University of Birmingham.

Hall, Steven (2013) Scale-up of emulsification in in-line rotor–stator mixers. Eng.D. thesis, University of Birmingham.

Hallam, Jonathan Mark (2011) Diffractive gratings in high-precision interferometry for gravitational wave detection. Ph.D. thesis, University of Birmingham.

Halliday, Nicola Ann (2011) Magnetic resonance investigations of pH in microemulsions. Ph.D. thesis, University of Birmingham.

Hama Salih, Mariwan Abdulla (2016) Synthesis of azetidines, γ-lactams, fused furan bispyrrolidines and 2-pyrazolines: towards medical application. Ph.D. thesis, University of Birmingham.

Hamani, Sadek (2013) Software based solutions for mobile positioning. Ph.D. thesis, University of Birmingham.

Hamedi, Mohammadreza (2016) Advanced thermal management of diesel aftertreatment systems. Ph.D. thesis, University of Birmingham.

Hamid, Mohamad Rijal (2011) Wideband reconfigurable antennas. Ph.D. thesis, University of Birmingham.

Hamidian Jahromi, Shiva (2011) Hydrogel encapsulation for the culture of bone. M.Phil. thesis, University of Birmingham.

Hamilton, Philip (2009) Hydrogen sorption in palladium doped microporous materials. M.Res. thesis, University of Birmingham.

Hamilton, Philip John (2014) The development of PVD coatings for PEM fuel cell bipolar plates. Ph.D. thesis, University of Birmingham.

Hamilton-Morris, Victoria Helena (2011) A multi-wavelength study of galaxy cluster cores. Ph.D. thesis, University of Birmingham.

Hamlett, Christopher A. E. (2008) Utilization of nanostructured surfaces for sensing applications and the use of nanoentities for the fabrication of new materials. Ph.D. thesis, University of Birmingham.

Hammond, Georgina (2017) Using supercritical carbon dioxide as a tool for preserving culturally significant items. Ph.D. thesis, University of Birmingham.

Hammond, Stephen Peter (2009) Imaging of luminescent nanoparticles in flows: development of surface active luminescent lanthanide complexes. Ph.D. thesis, University of Birmingham.

Hammons, Joshua Aaron (2012) A study of precipitated films formed during electrochemically driven dissolution processes. Ph.D. thesis, University of Birmingham.

Hanani, Abualseoud (2012) Human and computer recognition of regional accents and ethnic groups from British English speech. Ph.D. thesis, University of Birmingham.

Hanaç, Esen (2015) The large-time solution of nonlinear evolution equations. Ph.D. thesis, University of Birmingham.

Hancock, Cathryn Ann (2012) Anion substitution in Perovskite related materials for fuel cell applications. Ph.D. thesis, University of Birmingham.

Hancocks, Nichola Helen (2011) Optimisation of the preservation of microbial cell banks for enhanced fermentation process performance. Ph.D. thesis, University of Birmingham.

Hancocks, Robin Danyel (2011) Controlled emulsification using microporous membranes. Ph.D. thesis, University of Birmingham.

Hanratty, Luke David (2014) Λ and K$$^0$$$$_S$$ production in Pb-Pb and pp collisions with ALICE at the LHC. Ph.D. thesis, University of Birmingham.

Hao, Jie (2010) A study on the application of independent component analysis to $$in vivo$$ $$^1$$H magnetic resonance spectra of childhood brain tumours for data processing. Ph.D. thesis, University of Birmingham.

Hardman, Scott John (2016) Consumer adoption of fuel cell vehicles: lessons from historical innovations and early adopters of battery electric vehicles. Ph.D. thesis, University of Birmingham.

Harris, Catherine Ann (2015) Online plan modification in uncertain resource-constrained environments. Ph.D. thesis, University of Birmingham.

Harris, Christopher Nicholas (2014) Climate change-induced water shortages: improving decision-making in an uncertain future. Ph.D. thesis, University of Birmingham.

Harris, Dee (2011) Design and development of a hyphenated technique for monitoring the cure of epoxy-amine resin systems. Ph.D. thesis, University of Birmingham.

Harris, Luke (2011) A Study of the crystallisation kinetics in PEEK and PEEK composites. M.Res. thesis, University of Birmingham.

Harrison, Nicholas (2014) Equal channel angular pressing of elemental & alloyed P/M aluminium systems. Ph.D. thesis, University of Birmingham.

Harrison, Samuel Marcus (2010) Control of oscillatory convolution operators via maximal functions in weighted L$$^2$$ inequalities. Ph.D. thesis, University of Birmingham.

Hart, Abarasi (2014) Advanced studies of catalytic upgrading of heavy oils. Ph.D. thesis, University of Birmingham.

Harvey, Jonelle (2013) Modelling the dissociation dynamics and threshold photoelectron spectra of small halogenated molecules. Ph.D. thesis, University of Birmingham.

Hasan, Ahmad Omar (2011) Influence of prototype three way catalytic converter on regulated and unregulated emissions from gasoline HCCI/SI engine. Ph.D. thesis, University of Birmingham.

Hasan, Farhan (2017) Conductive resists for nanofabrication on insulating substrates. Ph.D. thesis, University of Birmingham.

Hasegawa, Daisuke (2017) Reducing land take and energy use of high-speed railways through the robust design of operations. Ph.D. thesis, University of Birmingham.

Hassall, Guy (2011) Wall build up in spray dryers. Eng.D. thesis, University of Birmingham.

Hassan, Faiza (2011) Heterogeneous catalysis in supercritical fluids: the enhancement of catalytic stability to coking. Ph.D. thesis, University of Birmingham.

Hassan, Nipula (2010) Investigating the controlled oxidation of manganese oxides with the Brownmillerite structure. M.Res. thesis, University of Birmingham.

Hassan Zadeh, Salman (2013) Sonoelectrochemical production of hydrogen via alkaline water electrolysis. M.Res. thesis, University of Birmingham.

Hassanin, Hany Salama Sayed Ali (2011) Fabrication of ceramic and ceramic composite microcomponents using soft lithography. Ph.D. thesis, University of Birmingham.

Haster, Carl-Johan Olof (2016) Compact, diverse and efficient: globular cluster binaries and gravitational wave parameter estimation challenges. Ph.D. thesis, University of Birmingham.

Hatefi, Arash (2013) Direct laser fabrication of Ti-5553. M.Res. thesis, University of Birmingham.

Hattenberger, Mariska (2016) Composite proton exchange membranes for intermediate temperature fuel cells. Ph.D. thesis, University of Birmingham.

Hauptstein, Bastian Rene (2016) Development and demonstration of suspended droplet alloying. Ph.D. thesis, University of Birmingham.

Hawkins, Michael Stuart (2009) Local conservation laws in quantum integrable systems. Ph.D. thesis, University of Birmingham.

Hawkins, Victoria (2011) Curved liquid jets: effect of scale, rheology and forced disturbances. Ph.D. thesis, University of Birmingham.

Hayati, Farzad (2017) Electronic properties of molybdenum disulphide calculated from first principles. Ph.D. thesis, University of Birmingham.

Hayes, Russell (2013) Development of a sustainability assessment methodology for UK streetworks projects. Ph.D. thesis, University of Birmingham.

He, Dongsheng (2014) Quantitative scanning transmission electron microscopy characterisation of size-selected gold clusters. Ph.D. thesis, University of Birmingham.

He, Tianhao (2015) Filtering amplifiers based on coupled resonator circuits. Ph.D. thesis, University of Birmingham.

He, Wei (2017) Towards miniaturized strontium optical lattice clock. Ph.D. thesis, University of Birmingham.

He, Wei (2015) Ultrafast dynamics of photoexcited carriers in semiconducting nano materials. Ph.D. thesis, University of Birmingham.

He, Yanping (2013) Understanding the interactions between microcapsules and fabric surfaces. Ph.D. thesis, University of Birmingham.

Healey, Joanne E (2010) Experiments to develop High Q and tunable superconducting coplanar resonators applicable for quantum bit technology. Ph.D. thesis, University of Birmingham.

Heard, Christopher James (2014) Structural and electronic characterisation of sub-nanometre metal particles. Ph.D. thesis, University of Birmingham.

Henke, Ellen (2010) Minimal fusion systems. Ph.D. thesis, University of Birmingham.

Henry, Dominic James Dougal (2016) The Stability of Multi-Layer Curtain Coating. Ph.D. thesis, University of Birmingham.

Hernandes, Mauricio Julio Angeles (2010) Catalytic supercritical water oxidation of nitrogen-containing organic compounds. School of Chemical Engineering thesis, University of Birmingham.

Hernández Muñoz, Luis Ulises (2015) Smartphone tools for anaphylaxis management. Ph.D. thesis, University of Birmingham.

Herraiz Lalana, Enrique (2017) Production of sintered NdFeB magnets from scrap alloy powders. Ph.D. thesis, University of Birmingham.

Herrod-Taylor, Andrew James (2011) The crystallisation of Poly (aryl ether etherketone) (PEEK) and its carbon fibre composites. M.Res. thesis, University of Birmingham.

Heslop, Richard William (2012) Investigation by small-angle neutron scattering of collective vortex behaviour in KFe2As2 and some YBaCuO based superconductors. Ph.D. thesis, University of Birmingham.

Hetherington, Andrew (2013) Characterisation of reactor graphite to inform strategies for the disposal of reactor decommissioning waste. Ph.D. thesis, University of Birmingham.

Heuer, Ernest Alexander Kristian (2009) Formulation and stability of model food foam microstructures. Eng.D. thesis, University of Birmingham.

Hewett, David R. (2012) Mixed anion amides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Hewitt, Christopher David (2016) Powder build-up in detergent packing lines. Eng.D. thesis, University of Birmingham.

Higgins, Daniel Louis (2017) The response of metals with different crystal structures to high strain rate loading and other mechanical tests. Ph.D. thesis, University of Birmingham.

Hill, Gemma Louise (2010) High pressure diffraction studies of gallosilicate natrolite: applications to pressure-induced cation trapping. Ph.D. thesis, University of Birmingham.

Hill, Paul Owen (2012) Fatigue and fracture of the ultrahigh strength steel AerMet 100. Eng.D. thesis, University of Birmingham.

Hinton, Andrew George (2016) Development of a transportable cold atom gradiometer. Ph.D. thesis, University of Birmingham.

Hinton, Elizabeth Mary (2016) The oxidation of liquid aluminium and the potential for oxides in grain refinement of aluminium alloys. Ph.D. thesis, University of Birmingham.

Hodaeian, Hamidreza (2013) Degradation of pure magnesium alloys in simulated body fluid. M.Res. thesis, University of Birmingham.

Hodgskiss, Joseph Peter (2010) Optimisation models and algorithms for multicast message routing and power control in wireless multihop networks. Ph.D. thesis, University of Birmingham.

Hoffrichter, Andreas (2013) Hydrogen as an energy carrier for railway traction. Ph.D. thesis, University of Birmingham.

Hofinger, Julia (2013) Micro- and macromixing studies in two- and three-phase (gas-solid-liquid) stirred chemical reactors. Ph.D. thesis, University of Birmingham.

Holloway, Craig Roy (2017) Stability of fibre-reinforced viscous flows. Ph.D. thesis, University of Birmingham.

Holmes, Scott Andrew (2017) Control and manipulation of small molecules in the scanning tunneling microscope. Ph.D. thesis, University of Birmingham.

Holst, Helen (2015) Study of the influence of the plasma torch in a plasma arc melting furnace. M.Sc. by Res. thesis, University of Birmingham.

Holt, Daniella Godinho Abreu (2011) Sustainable assessment for geotechnical projects. Ph.D. thesis, University of Birmingham.

Holynski, Michael (2012) Creating a two dimensional cold mixture experiment. Ph.D. thesis, University of Birmingham.

Hood, Richard (2010) The machinability of a gamma titanium aluminide intermetallic. Ph.D. thesis, University of Birmingham.

Hopper, Melanie Sarah (2011) Magnetic surface relaxation and reconstruction phenomena in frustrated magnetic systems. Ph.D. thesis, University of Birmingham.

Hore, Katie (2011) The investigation of condensed phosphates of alkaline earth metals for use as biomaterials. M.Res. thesis, University of Birmingham.

Horspool, Dean (2014) Development of corrosion fatigue testing in sour oilfield environments. Eng.D. thesis, University of Birmingham.

Hoskins, Thomas James (2015) The mechanical and tribological properties of PEEK gears. Ph.D. thesis, University of Birmingham.

Howard, Matthew (2016) Lithium ion conductivity in hydrogen storage and battery materials. Ph.D. thesis, University of Birmingham.

Howe, Katie Sarah (2014) Design improvements of micro-tubular solid oxide fuel cells for unmanned aircraft applications. Ph.D. thesis, University of Birmingham.

Howse, David Christopher (2015) Development and application of an ion mobility spectometer - quadrupole mass spectometer instrument. Ph.D. thesis, University of Birmingham.

Hsu, Chia-Chang (2014) New approaches to the production and separation of recombinant proteins. Ph.D. thesis, University of Birmingham.

Hu, Hongwei (2012) Towards an improved model of dynamics for speech recognition and synthesis. Ph.D. thesis, University of Birmingham.

Hu, Jing (2011) Solution of partial differential equations using reconfigurable computing. Ph.D. thesis, University of Birmingham.

Hu, Kuo-Juei (2016) Structural variation of size-selected metal clusters in chemical reactions. Ph.D. thesis, University of Birmingham.

Hu, Yu (2015) Improvement of the structural response of steel tubular wind turbine towers by means of stiffeners. Ph.D. thesis, University of Birmingham.

Hu, Zhen Hua Sampson (2012) Antennas with frequency domain control for future communication systems. Ph.D. thesis, University of Birmingham.

Hua, Hairui (2015) Survival modelling in mathematical and medical statistics. Ph.D. thesis, University of Birmingham.

Huang, Danguang (2011) Flexible design of urban water distribution systems. Ph.D. thesis, University of Birmingham.

Huang, Jianglin (2012) The characterisation and modelling of porosity formation in electron beam welded titanium alloys. Ph.D. thesis, University of Birmingham.

Huang, Zheng (2017) Integrated railway remote condition monitoring. Ph.D. thesis, University of Birmingham.

Huchler, Bernd Arthur (2009) Pressure infiltration behaviour and properties of aluminium alloy - Oxide ceramic preform composites. Ph.D. thesis, University of Birmingham.

Hudson, Dominic James (2015) Dimensional improvement of industrial gas turbine blades through enhanced process control. Ph.D. thesis, University of Birmingham.

Hudson, Paul Ronald (2014) Investigating foaming solutions generated by NaOH extraction of plant materials. Eng.D. thesis, University of Birmingham.

Hughes, Luke J.R (2016) Hydrogen sorption properties of magnesium-based thin films. Ph.D. thesis, University of Birmingham.

Hull, Gavin John (2009) Simulation of energy efficiency improvements on commuter railways. M.Phil. thesis, University of Birmingham.

Humphreys, Nicholas James (2013) The computational modelling of centrifugal casting, as a process to manufacture titanium aluminide aero engine components. Ph.D. thesis, University of Birmingham.

Hung, Yi Pei (2011) Encapsulation of nanomagnetite within polycaprolactone microspheres for bone replacement. Ph.D. thesis, University of Birmingham.

Hunt, Nicola Claire (2010) An alginate hydrogel matrix for the localised delivery of a fibroblast/ keratinocyte co-culture to expedite wound healing. Ph.D. thesis, University of Birmingham.

Hussain, Zahir (2010) Stability and transition of three-dimensional rotating boundary layers. Ph.D. thesis, University of Birmingham.

Hutton, Tanya (2016) Sensitivity of fusion neutronics to the pre-processing of nuclear data. Eng.D. thesis, University of Birmingham.

Huxley, Lucinda (2011) Kinetics and specificity of nicotinamide nucleotide binding to the dIII component of transhydrogenase from Rhodospirillum Rubrum. Ph.D. thesis, University of Birmingham.

I

Ibrahim, Salis (2016) Utility of critical fluids in extraction and encapsulation of polyphenolics from by-product of cider production. Ph.D. thesis, University of Birmingham.

Ibrahim, Sukaina (2010) Development and characterisation of calcium phosphate glasses and glass-ceramics containing fluorine and titanium. M.Res. thesis, University of Birmingham.

Imbaby, Mohamed (2010) Fabrication of 316-L stainless steel and composite micro machine components using softlithography and powder metallurgy process. Ph.D. thesis, University of Birmingham.

Ioannidis, Nicolas (2009) Manufacturing of agarose-based chromatographic adsorbents with controlled pore and particle size. Ph.D. thesis, University of Birmingham.

Iqbal, Raja Zafar (2010) Computation of nodes and weights of Gaussian Quadrature rule by using Jacobi method. M.Phil. thesis, University of Birmingham.

Iqbal, Tasawar (2011) An investigation on the effect of solution concentration, applied voltage and collection distance on electrospun fibres of PVA solutions. M.Res. thesis, University of Birmingham.

Iqbal, Zubera (2015) Recovery of lithium from kaolin mining waste material. Ph.D. thesis, University of Birmingham.

Irfan, Muhammad Shafiq (2013) Environmentally friendly pultrusion. Ph.D. thesis, University of Birmingham.

Isah, Abubakar Garba (2015) Production of cooking oil from corn germ using supercritical co2 as solvent. M.Phil. thesis, University of Birmingham.

Ishaq, Farryad (2012) Trace metal supplementation in wastewater sludge digesters. Ph.D. thesis, University of Birmingham.

Islas-Cital, Alan (2012) Amplitude and phase sonar calibration and the use of target phase for enhanced acoustic target characterisation. Ph.D. thesis, University of Birmingham.

Ismail, Ramli (2013) Theoretical studies of free and supported nanoalloy clusters. Ph.D. thesis, University of Birmingham.

J

Jaafar Sidek, Mohamed Ariff (2010) Monte Carlo investigations of radiotherapy beams: studies of conventional, stereotactic and unflattened beams. Ph.D. thesis, University of Birmingham.

Jabbary-Aslani, Farnaz (2011) Design attributes of spinal fusion cages and a surgical instrument to aid thier screw fixation. Ph.D. thesis, University of Birmingham.

Jackson, Clare Estelle (2001) A computational study of Gabor zone plate gamma ray holography. Ph.D. thesis, University of Birmingham.

Jackson, Ryan Daniel (2010) The effect of bond coat oxidation on the microstructure and endurance of two thermal barrier coating systems. Ph.D. thesis, University of Birmingham.

Jafaripour, Amir (2014) Utilisation of waste gas sludge for waste water treatment. Ph.D. thesis, University of Birmingham.

Jalali, Roya (2017) Investigating the neurobiological changes associated with cerebellar transcranial direct current stimulation (TDCS) using magnetic resonance imaging (MRI). Ph.D. thesis, University of Birmingham.

Jalalirad, Reza (2010) Improving the recovery of "difficult to release" periplasmically-expressed products from recombinant E. Coli. Ph.D. thesis, University of Birmingham.

James, Adam (2013) Connectivity of Hurwitz spaces. Ph.D. thesis, University of Birmingham.

James, Timothy, John (2012) Galaxy-Galaxy weak gravitational lensing in cluster environment. M.Phil. thesis, University of Birmingham.

Jameson, Nicola (2014) Production of aligned short-fibre composites. M.Res. thesis, University of Birmingham.

Jamshidi, Parastoo (2015) The formulation of novel calcium phosphate containing culture beads for cell therapy. Ph.D. thesis, University of Birmingham.

Jarvis, Thomas (2011) Manufacturing with fine metallic powders and binder systems. Eng.D. thesis, University of Birmingham.

Jasteh, Donya (2017) Experimental low-THz imaging radar for automotive applications. Ph.D. thesis, University of Birmingham.

Jasteh, Donya (2012) Isolation enhancement in a dual port antenna. M.Phil. thesis, University of Birmingham.

Jean-Baptiste, Émilie Michèle Déborah (2016) Statistical task modeling of activities of daily living for rehabilitation. Ph.D. thesis, University of Birmingham.

Jennings, Paul Christopher (2014) Computational studies of mono- and bimetallic nanoclusters for potential polymer electrolyte fuel cell applications. Ph.D. thesis, University of Birmingham.

Jesson, Michael Andrew (2012) The effect of heterogeneous roughness on conveyance capacity and application to the Shiono-Knight method. Ph.D. thesis, University of Birmingham.

Ji, Ran (2013) Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools. Ph.D. thesis, University of Birmingham.

Jia, Guanbo (2017) Community detection in complex networks using evolutionary computation. Ph.D. thesis, University of Birmingham.

Jian, Nan (2016) Scanning transmission electron microscopy of atomic structure of nanoparticle. Ph.D. thesis, University of Birmingham.

Jiang, Changzhao (2015) Optical investigation on the spray and combustion characteristics of the furan bio-fuels. Ph.D. thesis, University of Birmingham.

Jiang, Jiayun (2016) Fatigue and fracture of the friction welded titanium alloys. Ph.D. thesis, University of Birmingham.

Jiang, Kyle (2016) Advanced micro and nano fabrications for engineering applications. D.Sc. thesis, University of Birmingham.

Jiang, Peih-Jeng (2010) Application of Calcium Phosphate based gels for encapsulation of therapeutic molecules. Ph.D. thesis, University of Birmingham.

Jiang, Xiaogeng (2015) Characterising geometric errors in rotary axes of 5-axis machine tools. Ph.D. thesis, University of Birmingham.

Jiang, Yun (2013) Fabrication and characterisation of novel ultrasound transducers. Ph.D. thesis, University of Birmingham.

Jiang, Zhuangde (2011) Fabrication and nanoroughness characterization of specific nanostructures and nanodevice. Ph.D. thesis, University of Birmingham.

Jin, Yuecheng (2015) Melt-spun Mg-Ni for hydrogen storage. M.Res. thesis, University of Birmingham.

Jing, Daliang (2015) Experimental and numerical studies of fuel spray. Ph.D. thesis, University of Birmingham.

John, Unyime Edet (2011) Chemical performance of cement stabilised contaminated clay. Ph.D. thesis, University of Birmingham.

Johnson, Nathan (2014) Extrusion of closed end tubes for applications in sodium-beta alumina solid electrolytes. M.Res. thesis, University of Birmingham.

Johnson, Steven (2013) Narrow linewidth lasers for use with neutral strontium as a frequency standard. Ph.D. thesis, University of Birmingham.

Johnson, Thomas D. (2013) Microscopic swimming in biological fluids. Ph.D. thesis, University of Birmingham.

Jones, Alexander Marcus (2015) Truth, collection and deflationism in models of peano arithmetic. M.Res. thesis, University of Birmingham.

Jones, Alfred Ndahi (2017) Investigating the potential of Hibiscus seed species as alternative water treatment material to the traditional chemicals. Ph.D. thesis, University of Birmingham.

Jones, Benjamin Henry Demidecki (2010) The evolutionary emergence of neural organisation in computational models of primitive organisms. Ph.D. thesis, University of Birmingham.

Jones, Christopher Paul (2010) Imaging and spectroscopy of nanostructured surfaces. Ph.D. thesis, University of Birmingham.

Jones, Daniel Lewis (2017) Special and structured matrices in max-plus algebra. Ph.D. thesis, University of Birmingham.

Jones, Paul Glyn (2011) On improving the cost-effective dispersion of calcium carbonate in polypropylene for impact resistance. Eng.D. thesis, University of Birmingham.

Joshi, Ayush (2017) The germinal centre artificial immune system. Ph.D. thesis, University of Birmingham.

Jubleanu, Anca Marilena (2010) Carbo-nitride precipitation and its effect on matrix transformations in high strength-high toughness 300M steel. M.Res. thesis, University of Birmingham.

Jules, Désiré Guiovanni (2016) An agent-based approach to intelligent manufacturing network configuration. Ph.D. thesis, University of Birmingham.

Jumbu, Neeraj (2014) An investigation into the antioxidant activity of a cider yeast extract with the aim of process optimisation. Ph.D. thesis, University of Birmingham.

K

Kabakchiev, Kalin Hristov (2015) Maritime forward scatter radar: data collection and clutter analysis. Ph.D. thesis, University of Birmingham.

Kabiri Isfahani, Yasin (2016) Injection matching of antenna. Ph.D. thesis, University of Birmingham.

Kaklamani, Georgia (2012) The effect of active screen plasma nitriding on the cellular compatibility of polmeric biomaterials. Ph.D. thesis, University of Birmingham.

Kalinowski, Piotr (2017) Recrystallisation and grain size development during forging in power generation steels. Ph.D. thesis, University of Birmingham.

Kalnins, Raitis (2017) Production of prebiotic rich extracts from lignocellulosic biomass using subcritical water within the context of biorefining. Ph.D. thesis, University of Birmingham.

Kammogne Kamgaing, Rodrigue (2014) Domain decomposition methods for reaction-diffusion systems. Ph.D. thesis, University of Birmingham.

Kamsani, Silah Hayati (2016) Improvements on the bees algorithm for continuous optimisation problems. Ph.D. thesis, University of Birmingham.

Kanga, Yao (2011) Controlled release of Isothiazoline biocides from industrial minerals. Eng.D. thesis, University of Birmingham.

Kaonda, Mususu Kosta Mpongo (2017) Prediction of the recrystallised grain size distribution after deformation for the Nb free and model steel. Ph.D. thesis, University of Birmingham.

Karbassian, Mohammad Massoud (2009) Design and analysis of spreading code and transceiver architectures for optical CDMA networks. Ph.D. thesis, University of Birmingham.

Kargar, Maryam (2014) Emulsion design for protection of chemically sensitive bioactive ingredients. Ph.D. thesis, University of Birmingham.

KarimNejadAliabadi, Parya (2017) Development of thermoelectric cooling system for tissue ablation. Ph.D. thesis, University of Birmingham.

Karnchanasri, Kritsadanchalee (2013) Bi-layered chromatography matrices for the purification of biological nanoplexes. Ph.D. thesis, University of Birmingham.

Kartelia, Eleni Maria (2011) Thermal characterization of magnesium containing ionomer glasses. M.Res. thesis, University of Birmingham.

Kassam, Tahsin Ali (2012) The controlled synthesis and characterisation of magnesium particles with nano-morphologies via physical vapor deposition for hydrogen storage. M.Res. thesis, University of Birmingham.

Kaur, Parmjit Heer (2014) $$\pi$$-acid catalysed cyclisations to generate sulfur containing compounds. Ph.D. thesis, University of Birmingham.

Kavanagh, Alan (2017) Study of improved casting methods for the manufacture of medical grade cobalt alloy. Ph.D. thesis, University of Birmingham.

Kaya, Dogan (2016) Manipulation of molecules on surfaces with the scanning tunnelling microscope. Ph.D. thesis, University of Birmingham.

Kayode, Bayonle Ayokunle (2015) Solvothermal production of dimethylfuran from sugar derivatives toward future transport fuel. Ph.D. thesis, University of Birmingham.

Kedge, Jonathan L. (2017) Synthesis of ferrocene nucleic acid monomers and ferrocene containing drug candidates. Ph.D. thesis, University of Birmingham.

Keen, Philip James (2012) Independent Sets in Some Classical Groups of Dimension Three. Ph.D. thesis, University of Birmingham.

Keenan, Philip J (2017) Synthesis of electrolyte and electrode materials for solid oxide fuel cells. Ph.D. thesis, University of Birmingham.

Kelly, Luke Tristian (2010) On cycles in directed graphs. Ph.D. thesis, University of Birmingham.

Kenney, Mitchell Guy (2016) The development of metasurfaces for manipulating electromagnetic waves. Ph.D. thesis, University of Birmingham.

Kent, Anthony Clifford (2016) The mechanics of abrasion relating to household cleaning. Eng.D. thesis, University of Birmingham.

Kent, Matthew Paul (2015) Estimating functional performance for use in the aesthetic design process. Ph.D. thesis, University of Birmingham.

Keppler, Silvia (2017) Dry heat treatment of flour: addressing quality and safety implications. Ph.D. thesis, University of Birmingham.

Kershaw, David Michael (2017) Nanoparticle bound nucleic acid probes for DNA detection and gene inactivation. Ph.D. thesis, University of Birmingham.

Kersting, Alexandra Louise (2012) Light metal amides and imides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Khaled, Iman (2015) A study of some of the foundry processing factors influencing the quality of titanium alloy investment castings. Ph.D. thesis, University of Birmingham.

Khalil, Ashraf F. (2012) Networked control of distributed energy systems. Ph.D. thesis, University of Birmingham.

Khan, Ghulam Fatima (2016) Gold-catalysed reactions of alkynyl sulfoxides. M.Sc. by Res. thesis, University of Birmingham.

Khan, Imdad (2009) Diversity and MIMO for body-centric wireless communication channels. Ph.D. thesis, University of Birmingham.

Khan, Sarmad Ali (2014) Machining of nickel based superalloys using coated PCBN tooling. Ph.D. thesis, University of Birmingham.

Khan, Suleman Manawar (2015) Surface active lanthanide complexes for sensing applications on silica and gold surfaces. Ph.D. thesis, University of Birmingham.

Khan, Zahra (2014) Developing methods to image non-flourescent anticancer cylinders in cancer cell lines. Ph.D. thesis, University of Birmingham.

Khasraw, Sanhan Muhammad Salih (2015) M-axial algebras related to 4-transposition groups. Ph.D. thesis, University of Birmingham.

Khoshkhou, Danial (2017) The use of synchrotron x-ray micro computed tomography to study the failure mechanisms of thermal barrier coatings. Eng.D. thesis, University of Birmingham.

Khudhur, Peshawa Mohammed (2016) Sporadic simple groups of low genus. Ph.D. thesis, University of Birmingham.

Khzouz, Marcin (2014) The development and characterization of Ni-Cu/Al$$_2$$O$$_3$$ catalyst for hydrogen production via multi-fuel reforming. Ph.D. thesis, University of Birmingham.

Kiddie, Paul David (2011) Decentralised soft-security in distributed systems. Ph.D. thesis, University of Birmingham.

Kim, Hongsin (2016) Trackside measurement of critical zones in railway tracks. Ph.D. thesis, University of Birmingham.

Kim, Hyeyoung (2015) Hybrid composites with natural fibres. M.Res. thesis, University of Birmingham.

Kimpton, Claire Michelle (2010) Effects of post weld heat treatments on the fatigue of the inertia welded nickel based superalloy RR1000 at high temperatures. Ph.D. thesis, University of Birmingham.

Kingl, Arvid J. (2016) Fluctuational effects in interacting bosonic systems. Ph.D. thesis, University of Birmingham.

Kings, Iain Nicholas (2013) Supercritical water oxidation as a technology for the treatment of model and industrial wastewaters: reaction kinetics and reactor configurations. Ph.D. thesis, University of Birmingham.

Kirby, Daniel James (2011) Radiation dosimetry of conventional and laser-driven particle beams. Ph.D. thesis, University of Birmingham.

Kirkwood, David (2015) Simulation, test and performance evaluation of railway control strategies and algorithms. Ph.D. thesis, University of Birmingham.

Kitaguchi, Hiroto (2011) Inertia friction welded RR1000 and Inconel718 microstructure. Ph.D. thesis, University of Birmingham.

Klemencic, Georgina Marie (2013) Microwave and superconducting techniques for measurements on unconventional Josephson junctions. Ph.D. thesis, University of Birmingham.

Klinke, Olaf Karl (2012) A bitopological point-free approach to compactifications. Ph.D. thesis, University of Birmingham.

Knaggs, Craig (2017) Effects of surface condition on fatigue in nickel-based superalloys for aero-engine applications. Eng.D. thesis, University of Birmingham.

Kneebone, M L (2010) Probabilistic roadmaps in uncertain environments. Ph.D. thesis, University of Birmingham.

Knox, Fiachra (2013) Embedding spanning structures in graphs and hypergraphs. Ph.D. thesis, University of Birmingham.

Kock, Bjorn Ole (2013) Magneto-optical trapping of strontium for use as a mobile frequency reference. Ph.D. thesis, University of Birmingham.

Koleini, Masoud (2012) Verification of temporal-epistemic properties of access control systems. Ph.D. thesis, University of Birmingham.

Kolokythas, Konstantinos (2015) Radio properties of a complete sample of nearby groups of galaxies. Ph.D. thesis, University of Birmingham.

Kolonko, Anna Magdalena (2012) Investigation into the mechanical performance of pipe grade HDPE with included silicon chips as a basis for future sensors. Ph.D. thesis, University of Birmingham.

Konaraddi, Vitthal (2013) Hot isostatic pressing / diffusion bonding of Ti-6Al-4V. Ph.D. thesis, University of Birmingham.

Kong, Dechao (2013) Advanced HVDC systems for renewable energy integration and power transmission: modelling and control for power system transient stability. Ph.D. thesis, University of Birmingham.

Konstantinidis, Konstantinos (2015) Multi-layer periodic surfaces and metasurfaces for high-gain antennas. Ph.D. thesis, University of Birmingham.

Kopicki, Marek (2010) Prediction learning in robotic manipulation. Ph.D. thesis, University of Birmingham.

Koranteng-Yorke, John Bernard (2012) A proposed framework for asphaltic concrete pavement design for tropical soils – case study of Ghana. Ph.D. thesis, University of Birmingham.

Kostryzhev, Andrii Gennadiovych (2009) Bauschinger effect in Nb and V microalloyed line pipe steels. Ph.D. thesis, University of Birmingham.

Kour, Ravjeet (2011) J/$$\psi$$ production in proton-proton collisions at ALICE LHC. Ph.D. thesis, University of Birmingham.

Ku Azir, Ku Nurul Fazira (2014) Human factors of ubiquitous computing: ambient cueing in the digital kitchen? Ph.D. thesis, University of Birmingham.

Kubba, Ali Essam Salih (2013) Wireless tyre condition monitoring system self-powered by means of energy harvesting. Ph.D. thesis, University of Birmingham.

Kundu, Amrita (2011) Grain structure development during casting, reheating and deformation of Nb-microalloyed steel. Ph.D. thesis, University of Birmingham.

Kuo, Chun-Hsin (2010) The effect of Zr and ZrB2 additions to NdFeB alloys. Ph.D. thesis, University of Birmingham.

Kuo, Chun-Liang (2014) Drilling of Ti/CFRP/A1 multilayer stack materials. Ph.D. thesis, University of Birmingham.

Kurukji, Daniel (2015) Design and development of emulsions for encapsulation and molecular delivery applications. Eng.D. thesis, University of Birmingham.

Kuruvita Arachchige Don, Lasitha Priyanga Karunarathna (2014) Low-velocity impact analysis of monolithic and laminated glass using finite element method (FEM). M.Phil. thesis, University of Birmingham.

Kuszlewicz, James Stevenson (2017) Buoyancy-driven oscillations in helio- and asteroseismology. Ph.D. thesis, University of Birmingham.

Kwong, Kah Hin (2013) A design method for Hybrid Power Systems. M.Res. thesis, University of Birmingham.

Kyle, Michael Patrick (2015) Studies towards the Total Synthesis of Phyllaemblic Acid. Ph.D. thesis, University of Birmingham.

L

Lak, Rashad Rashid Haji (2015) Harmonic analysis using methods of nonstandard analysis. Ph.D. thesis, University of Birmingham.

Lam Cheun U, You Van (2010) Solids motion in fluidised beds of fine particles. Ph.D. thesis, University of Birmingham.

Landassuri Moreno, Victor Manuel (2012) Evolution of modular neural networks. Ph.D. thesis, University of Birmingham.

Langworthy, Andrew (2015) Chevalley group schemes as varieties over the field of one element. M.Res. thesis, University of Birmingham.

Lapinskas, John Adam (2014) Packings and coverings with Hamilton cycles and on-line Ramsey theory. Ph.D. thesis, University of Birmingham.

Larsson, Daniel Mikael (2011) Noise in coulomb blockaded quantum dots and kondo systems. Ph.D. thesis, University of Birmingham.

Lashkor, Minhaj (2010) Switchable biological surfaces. M.Res. thesis, University of Birmingham.

Lashkor, Minhaj (2015) Switchable surfaces for regulating biomolecular and cellular interactions under complex biological conditions. Ph.D. thesis, University of Birmingham.

Latorre-Noguera, Sandra Ximena (2015) Environmental and economic assessment of sustainable manufacturing processes for metal products. M.Sc. thesis, University of Birmingham.

Lattimore, Thomas (2016) Combustion and emissions of a direct injection gasoline engine using EGR. Ph.D. thesis, University of Birmingham.

Lau, Chia Sheng (2012) Biogas upgrade through exhaust gas reforming process for use in CI engines. Ph.D. thesis, University of Birmingham.

Law, Susan (2015) The characterisation of microemulsions using NMR measurements of diffusion. Ph.D. thesis, University of Birmingham.

Lawley, Martyn Laurence (2010) Aspects of quantum criticality in itinerant electron ferromagnetic systems. Ph.D. thesis, University of Birmingham.

Lawrence, Mark (2015) Symmetry and topology at the metasurface. Ph.D. thesis, University of Birmingham.

Lazell, Matthew (2015) Investigating active galactic nuclei with low frequency radio observations. Ph.D. thesis, University of Birmingham.

Lazidis, Aristodimos (2017) Stabilisation of foams by particulate structures. Eng.D. thesis, University of Birmingham.

Le Reverend, Benjamin Jean Didier (2010) Modelling of the phase change kinetics of cocoa butter in chocolate and application to confectionary manufacturing. Ph.D. thesis, University of Birmingham.

Leadbeater, Thomas William (2009) The development of positron imaging systems for applications in industrial process tomography. Ph.D. thesis, University of Birmingham.

Leadley, Craig Edward (2012) Understanding the effects of high-pressure, high-temperature processing on the key quality parameters of green beans (Phaseolus vulgaris) with a view to assessing the potential quality benefits of the approach relative to conventional thermal processing. Ph.D. thesis, University of Birmingham.

Leczkowska, Anna (2011) Non-covalent DNA-binding ruthenium anticancer drugs. Ph.D. thesis, University of Birmingham.

Lee, Graham Richard (2016) Resonance production in the π$$^+$$ π$$^-$$ decay channel in proton - proton collisions at 7 TeV. Ph.D. thesis, University of Birmingham.

Lee, Kai Teck (2013) Continuous granulation of pharmaceutical powder using a twin screw granulator. Ph.D. thesis, University of Birmingham.

Lee, Kevin (2016) Understanding shell cracking during de-wax process in investment casting. Ph.D. thesis, University of Birmingham.

Lee, Laura (2015) Understanding nanoemulsions. Ph.D. thesis, University of Birmingham.

Lee, Tae Jung (2010) Characterisation of anode supported microtubular SOFC process on pure methane reduction and operation. Ph.D. thesis, University of Birmingham.

Lees, Glenn (2014) The synthesis of galectin-3-targeted cancer imaging agents. Ph.D. thesis, University of Birmingham.

Lefort, Isaline (2015) Thermally efficient advanced diesel exhaust aftertreatment for cleaner vehicles. Ph.D. thesis, University of Birmingham.

Leigh, Simon J. (2010) The formation and characterisation of micro- and nanostructured surfaces through combinations of top-down and bottom-up fabrication methodologies. Ph.D. thesis, University of Birmingham.

Lemberger, Louis (2016) Vortex lattice in conventional and unconventional superconductors. Ph.D. thesis, University of Birmingham.

Lemon, Christopher P. (2010) Neutron Compton scattering from hydrogen and perovskite oxide interfaces. Ph.D. thesis, University of Birmingham.

Lester, Louise Elizabeth (2009) The biomechanical analysis of the hand in rheumatoid arthritis patients with MCP arthroplasty. M.Res. thesis, University of Birmingham.

Lett, Aaron Mitchell (2016) Microstructure engineering of emulsion-based systems for the control of satiation, satiety, hedonic acceptability and sensory quality. Ph.D. thesis, University of Birmingham.

Leung, Chin Pui Perry (2013) Exhaust gas fuel reforming to achieve fuel saving. Ph.D. thesis, University of Birmingham.

Levy, Mark (2016) Inclusive and differential measurements of spin correlation in top-antitop quark pairs at √s = 8 TeV using the ATLAS detector. Ph.D. thesis, University of Birmingham.

Lewis, Peter Richard (2010) Evolutionary market-based resource allocation in decentralised computational systems. Ph.D. thesis, University of Birmingham.

Lewis, Richard (2015) A semantic approach to railway data integration and decision support. Ph.D. thesis, University of Birmingham.

Li, Can (2017) Robust coordinated damping control of power systems with multi-terminal vsc-hvdc system and facts. Ph.D. thesis, University of Birmingham.

Li, Chuan (2017) Thermal energy storage using carbonate-salt-based composite phase change materials: linking materials properties to device performance. Ph.D. thesis, University of Birmingham.

Li, Gan (2012) Stochastic analysis and optimization of power system steady-state with wind farms and electric vehicles. Ph.D. thesis, University of Birmingham.

Li, Haiying (2013) CFD modelling study of sprays and combustion of gasoline and DMF in direct injection gasoline engines. Ph.D. thesis, University of Birmingham.

Li, Hao (2015) New mobile positioning techniques for LOS/NLOS environments and investigation of topology influence. Ph.D. thesis, University of Birmingham.

Li, Huan (2010) Damage and repair evolution of cold formed linepipe steel. Ph.D. thesis, University of Birmingham.

Li, Jiangling (2010) Structural characterisation of apatite-like materials. M.Res. thesis, University of Birmingham.

Li, Jianing (2016) Shared smart energy storage system for smart homes and smart buildings. Ph.D. thesis, University of Birmingham.

Li, Jing (2017) Alloying effect on boride formation behaviour in cast TiAl alloys. Ph.D. thesis, University of Birmingham.

Li, Jing (2016) Dynamics of power systems with wind power generation and the fractional frequency transmission system. Ph.D. thesis, University of Birmingham.

Li, Jun (2013) Numerical investigations of the coupled DEM-LBM technique with application to leakage-soil interaction due to a leaking pipe. Ph.D. thesis, University of Birmingham.

Li, Maojun (2015) Drilling of carbon fibre reinforced plastic (CFRP) and metal matrix composites (MMC). Ph.D. thesis, University of Birmingham.

Li, Nan (2013) A novel approach to supplier selection and order allocation in SMEs manufacturing networks. M.Phil. thesis, University of Birmingham.

Li, Sheng (2017) Development and processing of Ti-Ni-based shape memory alloys using laser melting techniques. Ph.D. thesis, University of Birmingham.

Li, Shi (2010) Rank reversal properties of multicriteria decision making models. M.Phil. thesis, University of Birmingham.

Li, Shuli (2014) Micromachined coupled resonator butler matrix. M.Phil. thesis, University of Birmingham.

Li, Tian (2017) The behaviour of double oxide film defects in the processing of liquid Mg alloys. Ph.D. thesis, University of Birmingham.

Li, Wei (2011) An investigation into the effect of stress on the formation and stability of carbon s-phase on austenitic stainless steel. Ph.D. thesis, University of Birmingham.

Li, Xiao (2015) Multi-hop and channel modelling for wireless body area networks at 60 GHz. Ph.D. thesis, University of Birmingham.

Li, Xingjian (2014) Parthenolide derivatives as potential leukaemia drugs. M.Sc. thesis, University of Birmingham.

Li, Yanfei (2012) Experimental study on spray and combustion characteristics of diesel-like fuels. Ph.D. thesis, University of Birmingham.

Li, Yinghui (2015) Nanostructured graphite/Li-N-H based composite materials for hydrogen storage. M.Res. thesis, University of Birmingham.

Liang, Yuan (2017) An investigation on the optimum aging condition for HFQ-processed AA6082 aluminium alloy. M.Sc. thesis, University of Birmingham.

Liddy, Alison Mary (2010) Multifunctional chromatography supports. Ph.D. thesis, University of Birmingham.

Lieu, Maggie (2016) Cosmic giants on cosmic scales. Ph.D. thesis, University of Birmingham.

Lilley, Joseph Neil (2011) Z $$\gamma$$ + differential cross section measurements and the digital timing calibration of the level-1 calorimeter trigger cluster processor system in ATLAS. Ph.D. thesis, University of Birmingham.

Lim, Joshua A. (2013) The role of local versus itinerant magnetism: studies of dilute magnetic semiconductors and multi-k magnets. Ph.D. thesis, University of Birmingham.

Lima, Antonio (2016) Digital traces of human mobility and interaction: models and applications. Ph.D. thesis, University of Birmingham.

Lin, Kaijie (2015) Development of advanced plasma surface technologies for high performance carbon paper gas diffusion layer and 316 stainless steel bipolar plates. Ph.D. thesis, University of Birmingham.

Lin, Yu-Hsiu (2010) Structure and properties of transparent conductive ZnO films grown by pulsed laser deposition (PLD). M.Res. thesis, University of Birmingham.

Lin, Yu-Pei (2010) Investigation of die wear by modelling the extrusion of Inconel 718. Ph.D. thesis, University of Birmingham.

Ling, Stephen (2011) Mesoscopic effects and local negative superfluid densities. Ph.D. thesis, University of Birmingham.

Little, Haydn Andrew (2017) The development of novel diagnostic sensors based on linear dichroism spectroscopy. Ph.D. thesis, University of Birmingham.

Liu, Dai (2015) Combustion and emissions of an automotive diesel engine using biodiesel fuels under steady and start conditions. Ph.D. thesis, University of Birmingham.

Liu, Gang (2011) Fabrication of porous ceramics and composites by a novel freeze casting process. Ph.D. thesis, University of Birmingham.

Liu, Jian (2017) Atomic structure and chemical analysis of metal nanoparticles by scanning transmission electron microscopy. Ph.D. thesis, University of Birmingham.

Liu, Jian (2014) Fabrication of composite materials with addition of graphene platelets. Ph.D. thesis, University of Birmingham.

Liu, Li (2014) Computational fluid dynamics modelling of complex fluid flow in stirred vessels. Ph.D. thesis, University of Birmingham.

Liu, Min (2010) Understanding the mechanical strength of microcapsules and their adhesion on fabric surfaces. Ph.D. thesis, University of Birmingham.

Liu, Qiang (2012) Structural analysis and design of cold formed steel sigma purlins. Ph.D. thesis, University of Birmingham.

Liu, Qing (2010) Antennas using left handed transmission lines. Ph.D. thesis, University of Birmingham.

Liu, Qiongxi (2017) An investigation of the stability of advanced carbon-based coatings under high temperature and high pressure. Ph.D. thesis, University of Birmingham.

Liu, Ran (2013) Surface modification of ASTM F-1537 Co-Cr alloy by low temperature plasma surface alloying. M.Res. thesis, University of Birmingham.

Liu, Ruixia (2012) Synthesis, characterisation and decomposition properties of manganese-based borohydrides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Liu, Shuang (2013) An investigation of lead zirconate titanate thick film actuators for Micro-structured Optical Arrays. M.Sc. thesis, University of Birmingham.

Liu, Sze-Yeung (2012) Matching algorithms for interest management in distributed virtual environments. Ph.D. thesis, University of Birmingham.

Liu, Xi (2014) Microstructural characterisation of pearlitic and complex phase steels using image analysis methods. Ph.D. thesis, University of Birmingham.

Liu, Ying (2010) The role of dynamic features in speaker verification. Ph.D. thesis, University of Birmingham.

Liu, Zhaoran (2017) Plastic deformation of Ti-6Al-4V micro-pillars at room temperature. Ph.D. thesis, University of Birmingham.

Lloyd, David Matthew (2016) Mechanistic understanding of the rotating membrane emulsification process towards the development of design and scale-up theory. Eng.D. thesis, University of Birmingham.

Lobato, Hugo Manuael Pinto (2012) An investigation into coordinate measuring machine task specific measurement uncertainty and automated conformance assessment of airfoil leading edge profiles. Eng.D. thesis, University of Birmingham.

Locret-Collet, Martin Michel Georges (2017) Commoning our futures? An anarchist urban political ecology. Ph.D. thesis, University of Birmingham.

Lodhia, Deepali (2013) Investigations into phase effects from diffracted Gaussian beams for high-precision interferometry. Ph.D. thesis, University of Birmingham.

Logsdail, Andrew James (2012) Computational characterisation of gold nanocluster structures. Ph.D. thesis, University of Birmingham.

Long, Yue (2010) Characterization and reduction of leakiness in melamine formaldehyde microcapsules. Ph.D. thesis, University of Birmingham.

Lopez Martinez, Marco Antonio (2011) Studies of tartaric acid modified nickel supported catalysts for enantioselective hydrogenation reactions. Ph.D. thesis, University of Birmingham.

Lovell, Claire Michelle (2012) Friction welding for high performance aerospace applications. Eng.D. thesis, University of Birmingham.

Low, Sui Pheng (2012) Strategic development of the built environment through international construction, quality and productivity management. D.Sc. thesis, University of Birmingham.

Lu, Guanzhou (2014) Characterising fitness landscapes with fitness-probability cloud and its applications to algorithm configuration. Ph.D. thesis, University of Birmingham.

Lu, I-Chen (2010) Robust portfolio optimization. M.Phil. thesis, University of Birmingham.

Lu, Menglei (2017) Evaluation of railway performance through quality of service. Ph.D. thesis, University of Birmingham.

Lu, Nannan (2015) Net-shape manufacturing of sialon ceramics. M.Sc. thesis, University of Birmingham.

Lu, Shani (2012) Design of microwave hybrid couplers using inter-coupled resonators. M.Phil. thesis, University of Birmingham.

Lu, Shaofeng (2011) Optimising power management strategies for railway traction systems. Ph.D. thesis, University of Birmingham.

Lu, Yaxiang (2016) Advanced one-dimensional nanostructures for high performance catalyst electrodes in polymer electrolyte fuel cells. Ph.D. thesis, University of Birmingham.

Lu, Yongmin (2013) Microstructural characterisation of a high strength Nickel-based superalloy. Ph.D. thesis, University of Birmingham.

Lu, Yu (2014) Microstructure and degradation behaviour of Mg-Zn(-Ca) alloys. Ph.D. thesis, University of Birmingham.

Luan, Tianshi (2017) Development of a remote optically actuated and interrogated passive sensor with micro corner cube reflector structure. Ph.D. thesis, University of Birmingham.

Lucas, Timothy (2013) Pair distribution function studies of inorganic materials under extreme conditions. Ph.D. thesis, University of Birmingham.

Lucas, Timothy (2009) The experiences of first year chemistry students learning spectroscopy by an enquiry-based approach. M.Phil. thesis, University of Birmingham.

Lunel, Marie Monique France (2015) Structure characterisation of catalysts using x-ray micro-computed tomography. Ph.D. thesis, University of Birmingham.

Luo, Xia (2014) The response of ASTM F1537 Co-28Cr-6Mo alloy with different phase constituents to low-temperature plasma carburising. Ph.D. thesis, University of Birmingham.

Luo, Xing (2011) Mathematical modelling and energy conversion efficiency analysis of scroll air motors and its application to a pneumatic-electrical system. Ph.D. thesis, University of Birmingham.

Lurkin, Nicolas (2017) Neutral pion transition form factor measurement and run control at the NA62 experiment. Ph.D. thesis, University of Birmingham.

Luszcz, Pawel (2009) Combustion diagnostics in Homogeneous Charge Compression Ignition optical and thermal single cylinder engines. Ph.D. thesis, University of Birmingham.

Lydon, Claire Elizabeth (2009) Towards the synthesis of ferrocene nucleic acids. M.Res. thesis, University of Birmingham.

M

Ma, He (2013) Control oriented engine modelling and engine multi-objective optimal feedback control. Ph.D. thesis, University of Birmingham.

Mac Namara, Carl (2014) The physics of washing machines. Eng.D. thesis, University of Birmingham.

MacCaig, Marie (2015) Integrality in max-linear systems. Ph.D. thesis, University of Birmingham.

MacDonald, James Edward (2017) Hot isostatic pressing of a high temperature Ni-superalloy CM247LC: processing-microstructure-properties. Ph.D. thesis, University of Birmingham.

MacDonald, James Edward (2012) The effect of reflective baffles on the thermal gradient in directional solidification. M.Res. thesis, University of Birmingham.

Machin, Graham (2015) Improvements in temperature measurement. D.Sc. thesis, University of Birmingham.

Madrid, Elena (2012) Electrochemical and spectroscopic studies of phospholipid bilayers supported on Au(111) electrodes. Ph.D. thesis, University of Birmingham.

Madun, Aziman (2012) Seismic evaluation of vibro-stone column. Ph.D. thesis, University of Birmingham.

Mahajan, Smriti (2011) Star formation and environment of galaxies. Ph.D. thesis, University of Birmingham.

Mahendran, Ramani Salmalee (2010) Characterisation of cross-linking and moisture ingress detection in an epoxy/amine resin using fibre-optic sensors. Ph.D. thesis, University of Birmingham.

Mahesar, Quratul-ain (2014) Computing relatively large algebraic structures by automated theory exploration. Ph.D. thesis, University of Birmingham.

Mahmoodi, Nasim (2017) Design and development of MEMS biosensors. Ph.D. thesis, University of Birmingham.

Mahmoudi, Hamid (2015) Performance of cobalt-based eggshell catalyst in low-temperature Fischer-Tropsch synthesis process to produce long-chain hydrocarbons from synthesis gas utilizing fixed-bed reactor technology. Ph.D. thesis, University of Birmingham.

Mahmud, Rashad Hassan (2016) Synthesis of waveguide antenna arrays using the coupling matrix approach. Ph.D. thesis, University of Birmingham.

Mahomed, Aziza (2009) Properties of elastomers for small-joint replacements. Ph.D. thesis, University of Birmingham.

Main, Marcus John (2010) The design and synthesis of fluorescent peptides and disaccharides for tumour imaging. Ph.D. thesis, University of Birmingham.

Makana, Lewis O. (2016) Development of a decision support system for sustainable and resilience evaluation of urban underground space physical infrastructure. Ph.D. thesis, University of Birmingham.

Makinde, Olusola Samuel (2015) On some classification methods for high dimensional and functional data. Ph.D. thesis, University of Birmingham.

Maksabi, Mersedeh (2014) Integration of a mechanical interlocking lever frame into a signaling demonstrator. M.Res. thesis, University of Birmingham.

Malboubi, Majid (2012) Study of gigaseal formation in patch clamping using nanotechnology. Ph.D. thesis, University of Birmingham.

Malcolm, Jonathan (2013) Study of excited states in $$^1$$$$^4$$C via the $$^4$$He($$^1$$$$^0$$Be$$\alpha$$)$$^1$$$$^0$$Be resonance scattering reaction. Ph.D. thesis, University of Birmingham.

Malcolm, Jonathan Ian (2016) Construction of a portable platform for cold atom interferometry. Ph.D. thesis, University of Birmingham.

Malik, Shoaib Ahmad (2011) Damage detection using self-sensing composites. Ph.D. thesis, University of Birmingham.

Mamat, Rizalman (2010) Performance and emission characteristics of an automotive diesel engine using biodiesel fuel with the influence of air intake variables. Ph.D. thesis, University of Birmingham.

Mambrini, Andrea (2015) Theory grounded design of genetic programming and parallel evolutionary algorithms. Ph.D. thesis, University of Birmingham.

Manchester, Jack Nathaniel (2014) Photochromic control of nucleic acid systems through anthracene photodimerisation. Ph.D. thesis, University of Birmingham.

Manchisi, James (2016) Development of sustainable adsorbents for wastewater treatment. Ph.D. thesis, University of Birmingham.

Mancini, Loretta Ilaria (2015) Formal Verification of Privacy in Pervasive Systems. Ph.D. thesis, University of Birmingham.

Manmi, Kawa (2015) Three dimensional acoustic microbubble dynamics near rigid boundary. Ph.D. thesis, University of Birmingham.

Mannix, Christopher Robert (2016) Measuring and modelling the impact of the ionosphere on space based synthetic aperture radars. Ph.D. thesis, University of Birmingham.

Mansour, Ghaith Elsanosi M. (2013) Reconfigurable and multi-functional antennas. Ph.D. thesis, University of Birmingham.

Manyam, Jedsada (2011) Novel resist materials for next generation lithography. Ph.D. thesis, University of Birmingham.

Mao, Jishen (2012) Characterisation of plasma arc technology processed waste products. M.Res. thesis, University of Birmingham.

Marin-Lambarri, Daniel Jose (2015) First observation of a 5- Resonance in 12C; evidence for triangular D3h symmetry. Ph.D. thesis, University of Birmingham.

Marsh, Joseph Jack (2017) Characterisation of crystallisation and melting in thermoplastic polymers using chip calorimetry. Ph.D. thesis, University of Birmingham.

Marsh, Thomas P. (2011) Studies into the ion exchange and intercalation properties of AlH2P3O10•2H2O. Ph.D. thesis, University of Birmingham.

Martin, Nicolas (2010) Gold-catalysed reactions of Nitrogen containing molecules. Ph.D. thesis, University of Birmingham.

Martin, Timothy Alexander David (2013) Diffractive dissociation of protons in 7 TeV collisions at the ATLAS detector. Ph.D. thesis, University of Birmingham.

Mason, Richard (2015) Transfer function approaches to the one-dimensional thermodynamics of classical magnets, and the long-range dipole interaction in rare-earth pyrochlores. Ph.D. thesis, University of Birmingham.

Massri, Karim (2015) Kaon identification and Search for Lepton Number Violation in K$$^±$$ decay-in-flight experiments at CERN. Ph.D. thesis, University of Birmingham.

Matharu, Parvitar (2014) Transhydrogenase: understanding a molecular machine. Ph.D. thesis, University of Birmingham.

Matthews, Alice (2010) Thermal characterisation of XB2-CA4 : cyclic poly(butylene terephthalate) with stannoxane catalyst. M.Res. thesis, University of Birmingham.

Matthews, Zoe Louise (2011) Proton-proton collisions at the Large Hadron Collider's ALICE Experiment: diffraction and high multiplicity. Ph.D. thesis, University of Birmingham.

Mavridou, Marina (2015) Tunable microwave and millimetre-wave metamaterial structures and applications. Ph.D. thesis, University of Birmingham.

May, Paul Edward (2013) Multi-wavelength strong lensing study of low redshift cluster cores. Ph.D. thesis, University of Birmingham.

McCain, Stephen (2012) Characterisation of the aqueous corrosion process in NdFeB melt spun ribbon and MQI bonded magnets. Ph.D. thesis, University of Birmingham.

McCarry, Patrick (2011) Investigation into the production of calcium pectinate particles for oral delivery to the colon. M.Res. thesis, University of Birmingham.

McCarry, Patrick Michael (2016) Investigation into the production of a particle-in-particle system for the treatment of hepatocellular carcinoma by transarterial chemoembolization. Ph.D. thesis, University of Birmingham.

McCarthy, James (2016) Search for rare baryonic b decays with the LHCb experiment at the LHC. Ph.D. thesis, University of Birmingham.

McCoy, Yolla Bishara (2017) Trade effluent recycling and reuse in the food and beverage manufacturing sector. Ph.D. thesis, University of Birmingham.

McDonald, Katie (2015) Thermal management during direct laser deposition (DLD) of Ti-6Al-4V components. M.Res. thesis, University of Birmingham.

McDonald, Nikkia M. (2017) The manufacture and testing of anode supported Ni-10Sc1CeSZ SOFCs for intermediate temperature operation. Ph.D. thesis, University of Birmingham.

McGovern, Stewart (2016) The linearised dambreak problem. Ph.D. thesis, University of Birmingham.

McInroy, Justin Fergus (2011) A family of biaffine geometries and their resulting amalgams. Ph.D. thesis, University of Birmingham.

McLaughlan, Thomas (2014) Measurement of spin correlation in top quark pair production at ATLAS. Ph.D. thesis, University of Birmingham.

McMaster, Claire (2013) Radical mediated reactions of dithiocarbamates. Ph.D. thesis, University of Birmingham.

McMaster, Richard Benjamin (2014) Sensemaking in emergency response command and control. Ph.D. thesis, University of Birmingham.

McNutt, Philip Alexander (2015) An investigation of cracking in laser metal deposited nickel superalloy CM247LC. Eng.D. thesis, University of Birmingham.

McRobbie, Stuart Grant (2015) Development of an image based system for routine visual inspection of UK highways bridges. Ph.D. thesis, University of Birmingham.

Meadowcroft, Antony David (2014) Performance of fuel cells a study on Ip-SODC and DMFC. M.Res. thesis, University of Birmingham.

Meakin, Jonathan Philip (2016) Development of a pilot scale strip casting system to produce optimised alloys for neodymium-iron-boron magnets. Ph.D. thesis, University of Birmingham.

Mee, Stephen J. (2011) The synthesis, characterisation and properties of self- assembled hollow and low density microspheres. Eng.D. thesis, University of Birmingham.

Meegahawatte, Danushka Hansitha (2010) A design method for specifying power sources for hybrid power systems. Ph.D. thesis, University of Birmingham.

Mehauden, Karin (2009) Evaluation of the thermal and mixing performance of an agitated vessel for processing of complex liquid foodstuffs. Ph.D. thesis, University of Birmingham.

Mehrotra, Abhinav (2017) A framework for intelligent mobile notifications. Ph.D. thesis, University of Birmingham.

Melotti, Federico (2017) A novel aluminium nano-composite with enhanced mechanical properties. Ph.D. thesis, University of Birmingham.

Melrose, Ben James (2011) The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851. M.Res. thesis, University of Birmingham.

Meluch, Lubos (2010) Warm compaction of aluminium alloy Alumix 123. Ph.D. thesis, University of Birmingham.

Menaa, Mohamed Nabih (2012) On the compositionality of round abstraction. Ph.D. thesis, University of Birmingham.

Meredith, Gavin Simon (2014) Friction stir processing for the reversal and mitigation of sensitisation and intergranular corrosion in aluminium alloy 5083-H321. Ph.D. thesis, University of Birmingham.

Meyer, John Christopher (2013) Theoretical aspects of the Cauchy problem for non-Lipschitz semi-linear parabolic partial differential equations. Ph.D. thesis, University of Birmingham.

Mi, Na (2014) Synchrotron x-ray studies of atmospheric pitting corrosion of stainless steel. Ph.D. thesis, University of Birmingham.

Michael, Vipin George (2013) Effects of passive porous walls on the first Mack mode instability of hypersonic boundary layers over a sharp cone. Ph.D. thesis, University of Birmingham.

Mihailova, Olga (2017) Characterisation of flow, mixing and changeover in SMX static mixers. Eng.D. thesis, University of Birmingham.

Miles, Christopher James (2011) Fracture and Fatigue of the Inertia Welded Titanium Alloy Ti-6Al-2Sn-4Zr-6Mo. M.Res. thesis, University of Birmingham.

Miller, Owen Daniel (2011) MAPS calorimetry for a future linear collider. Ph.D. thesis, University of Birmingham.

Mills, Amanda Jayne (2016) Investigating cetyltrimethylammonium bromide (CTAB) reverse microemulsions using nuclear magnetic resonance. Ph.D. thesis, University of Birmingham.

Mills, Thomas Benjamin (2012) Development of in-vitro mouth methods for studying oral phenomena. Ph.D. thesis, University of Birmingham.

Mingarelli, Chiara Maria Francesca (2014) Gravitational wave astrophysics with pulsar timing arrays. Ph.D. thesis, University of Birmingham.

Minku, Leandro Lei (2011) Online ensemble learning in the presence of concept drift. Ph.D. thesis, University of Birmingham.

Mirri, Giorgio (2011) Ferrocene-based electrochemical chiral sensors. Ph.D. thesis, University of Birmingham.

Mitchell, Ian (2012) Gas jet processing for local heat treatment applications. Eng.D. thesis, University of Birmingham.

Moazami, Nima (2016) Development of kinetics, mathematical model and optimization of Fischer-Tropsch synthesis on cobalt-based catalyst. Ph.D. thesis, University of Birmingham.

Moghadas Mobarakeh, Parshia (2012) Tribology of ball-and-socket total disc arthroplasty. Ph.D. thesis, University of Birmingham.

Moghareh Abed, Tara (2016) Experimental investigation of cast iron corrosion on clay soil and GPR performance. Ph.D. thesis, University of Birmingham.

Moghimi, Mohammadhossein (2017) Affective virtual environments: a psychophysiological HCI system concept. Ph.D. thesis, University of Birmingham.

Mohamed, Muhidin Abdullahi (2016) Automatic text summarisation using linguistic knowledge-based semantics. Ph.D. thesis, University of Birmingham.

Mohamed, Omar R. Ibrahim (2012) Study of energy efficient supercritical coal-fired power plant dynamic responses and control strategies. Ph.D. thesis, University of Birmingham.

Mohammadkhani, Ali (2013) Modified colloidal lithography: a flexible tool for fabrication of periodic nanostructures. Ph.D. thesis, University of Birmingham.

Mohammed, Sudaba Aref (2016) Multigrid methods in convex optimization with application to structural design. Ph.D. thesis, University of Birmingham.

Mohammed Ali, Haval Bashar (2016) Atmospheric pitting corrosion of stainless steel. Ph.D. thesis, University of Birmingham.

Mohammed Ameen, Rayan Basheer (2017) Plastic deformation of Ti-6Al-4V at small scale: a microstructural and mechanistic study. Ph.D. thesis, University of Birmingham.

Mohammed Salih, Haval M. (2015) Finite groups of small genus. Ph.D. thesis, University of Birmingham.

Mohd Bohari, Siti Pauliena (2012) Effect of ultrasound on production of extracellular matrix by cells in culture. Ph.D. thesis, University of Birmingham.

Mohd Shah, Shaharil (2016) Nonlinear characterisation of reconfigurable antennas. Ph.D. thesis, University of Birmingham.

Mohd Shukri, Siti Rohkmah Binti (2017) Children adapt drawing actions to their own motor variability and to the motivational context for action. Ph.D. thesis, University of Birmingham.

Mohsin, Muhammad (2013) On asymptotical & numerical analyses of liquid jets. Ph.D. thesis, University of Birmingham.

Molokanov, Aleksej (2017) Design of the high-strength gear steels for use in advanced power transmission for low-emission aero-engines. Ph.D. thesis, University of Birmingham.

Momand, Haroon (2013) The effect of ultrasound on Nafion® Polymer in proton exchange membrane fuel cells (PEMFCs). M.Res. thesis, University of Birmingham.

Monir, Mehdi (2012) XANES study of chemistry of localised corrosion in artificial pits of 316L stainless steel and titanium. Ph.D. thesis, University of Birmingham.

Montenegro Villota, Angela Liliana (2013) Convex conic relaxations of the scheduling problem. Ph.D. thesis, University of Birmingham.

Montenegro Villota, Angela Liliana (2010) Usability of Websites. M.Phil. thesis, University of Birmingham.

Morden, Justin Anthony (2017) A numerical investigation of the effects of crosswinds upon the aerodynamic characteristics of a high-speed passenger train and its slipstream. Ph.D. thesis, University of Birmingham.

Morgan, Amy (2015) Supporting the diagnosis of childhood brain tumours through structural reports and ontological reasoning. M.Sc. thesis, University of Birmingham.

Morgan, G. L. (2013) Symmetric and semisymmetric graphs. Ph.D. thesis, University of Birmingham.

Morris, Thomas Bembridge Slater (2011) Nilpotent injectors in finite groups. Ph.D. thesis, University of Birmingham.

Morrison, Jonathan J. (2016) Corrosion, transport, and deposition in pressurised water nuclear reactor primary coolant systems. Eng.D. thesis, University of Birmingham.

Morrison, Ross Stuart (2016) Emulsion design for reduced fat baking margarine. Ph.D. thesis, University of Birmingham.

Mortazavi Najafabadi, Seyed Hani Elamahdi (2014) Game theoretic approach to medium access control in wireless networks. Ph.D. thesis, University of Birmingham.

Moslemi Zadeh, Sara (2013) Sustainability evaluation of shared greywater recycling in urban mixed-use regeneration areas. Ph.D. thesis, University of Birmingham.

Mosli, Izazi Aqilah (2015) Investigation into the effect of mesh size on adsorber bed pressure drop performance for solar powered air conditioning system. M.Res. thesis, University of Birmingham.

Motsi, Tafadzwa (2010) Remediation of acid mine drainage using natural zeolite. Ph.D. thesis, University of Birmingham.

Mounzer, Hamza (2009) Heterogeneous oxidation of alcohols. Ph.D. thesis, University of Birmingham.

Moxon, Thomas Edward (2017) Mathematical modelling of gastric emptying and nutrient absorption in the human digestive system. Ph.D. thesis, University of Birmingham.

Mudarikwa, Lawrence (2015) Cold atoms in a ring cavity. Ph.D. thesis, University of Birmingham.

Mudd, Richard David (2016) Experimental study of the properties of the Higgs boson. Ph.D. thesis, University of Birmingham.

Mudrova, Lenka (2017) Task scheduling and merging in space and time. Ph.D. thesis, University of Birmingham.

Mueller, Thomas (2016) Systems for measuring B cell receptor affinity maturation in germinal centres. Ph.D. thesis, University of Birmingham.

Muhammad, Haseena Bashir (2012) Development of a bio-inspired MEMS based tactile sensor array for an artificial finger. Ph.D. thesis, University of Birmingham.

Mulas, Andrea (2013) Ferrocene-based chiral monomers and oligomers for sensing applications. Ph.D. thesis, University of Birmingham.

Mulroy, Sarah Louise (2017) Illuminating the dark universe with galaxy clusters. Ph.D. thesis, University of Birmingham.

Muniz de Barros, Arielle (2016) A new approach to develop cost-effective lignocellulosic bioethanol production. Ph.D. thesis, University of Birmingham.

Munoz, Raul E. (2015) Finite element modelling (including material grain refinement prediction) when turning advanced aerospace alloys. Ph.D. thesis, University of Birmingham.

Munro, Kevin Ross (2013) Selective alkylidene carbene insertion reactions - studies towards the synthesis of ingenol. Ph.D. thesis, University of Birmingham.

Murad, Noor Asniza (2011) Micromachined millimeter wave circuits. Ph.D. thesis, University of Birmingham.

Murillo Quijada , Javier Alberto (2015) Direct measurement of the top-quark width with the ATLAS experiment. Ph.D. thesis, University of Birmingham.

Murphy, Shona (2011) Melting point depression in biodegradable polyesters. M.Res. thesis, University of Birmingham.

Murphy, Shona Hollie (2015) Carbon dioxide assisted blending of biodegradable polyesters. Ph.D. thesis, University of Birmingham.

Murrant, Daniel (2017) The water-energy nexus: quantifying the impact of water availability on future UK thermal power generation. Ph.D. thesis, University of Birmingham.

Murray, Angela Janet (2012) Recovery of platinum group metals from spent furnace linings and used automotive catalysts. Ph.D. thesis, University of Birmingham.

Murray, Paul (2013) Low temperature synthesis of boron carbide using a polymer precursor powder route. M.Res. thesis, University of Birmingham.

Murray, Paul James (2016) Hot isostatic pressing for the production of bimetallic fuel pump bearings. Eng.D. thesis, University of Birmingham.

Murray, Richard Cameron (2013) An investigation into fibre spreading. M.Res. thesis, University of Birmingham.

Murray, Richard Cameron (2017) Design and development of a new class of intra-filament hybrid composite. Ph.D. thesis, University of Birmingham.

Murwantara, I Made (2016) The application of software product line engineering to energy management in the cloud and in virtualised environments. Ph.D. thesis, University of Birmingham.

Muñoz-Britton, Tomás (2011) The search for the 2+ excitation of the 12C Hoyle state using the 12C(12C,12C[3alpha])12C reaction. Ph.D. thesis, University of Birmingham.

Mycroft, Richard (2010) The regularity method in directed graphs and hypergraphs. Ph.D. thesis, University of Birmingham.

Myerson, Richard James (2017) The development of novel allosteric modulators of the 5-HT3 receptor. Ph.D. thesis, University of Birmingham.

N

Nabiei, Roozbeh (2017) Action recognition using instrumented objects for stroke rehabilitation. Ph.D. thesis, University of Birmingham.

Naegele, Philipp Alexander (2010) An infeasible-path-following algorithm for nonlinear multiobjective optimisation problems. Ph.D. thesis, University of Birmingham.

Naghashian, Mohammad Hossein (2015) Generalised cost benefit analysis for large infrastructure projects: the case of the channel tunnel rail link. Ph.D. thesis, University of Birmingham.

Naik, Jay Prakash (2014) Nanowires fabricated by Focused Ion Beam. Ph.D. thesis, University of Birmingham.

Nair, Abilash Kumar Kochumulappon Raghavan (2015) Process and structural health monitoring of advanced fibre reinforced composites using optical fibre sensors. Ph.D. thesis, University of Birmingham.

Najafian, Maryam (2016) Acoustic model selection for recognition of regional accented speech. Ph.D. thesis, University of Birmingham.

Nallur, Vivek (2012) A decentralized self-adaptation mechanism for service-based applications in the cloud. Ph.D. thesis, University of Birmingham.

Narendrakumar, Krunal (2015) Developing methods to prevent or treat microbial colonisation of titanium dental implant surfaces. Ph.D. thesis, University of Birmingham.

Nasanit, Rujikan (2010) Modulatable endosomalytic, intracellularly biodegradable vectors for gene delivery. Ph.D. thesis, University of Birmingham.

Navin, Sparsh (2011) Diffraction in ALICE and trigger efficiencies. Ph.D. thesis, University of Birmingham.

Nazir, Mahvish (2016) Automotive radar target detection using ambiguity function. Ph.D. thesis, University of Birmingham.

Neal, Grace (2012) Mixing during the filling process. M.Res. thesis, University of Birmingham.

Neville, Simon Peter (2013) Quantum dynamics studies of the photodissociation of molecular systems. Ph.D. thesis, University of Birmingham.

Newell, Matthew David (2009) Aspects of a novel casting process for the production of nickel-based superalloy high pressure turbine blades. Eng.D. thesis, University of Birmingham.

Newson, Francis (2016) Kaon identification and the search for heavy neutrinos at NA62. Ph.D. thesis, University of Birmingham.

Newton, Jill Elizabeth (2014) Nanoparticle catalysts for proton exchange membrane fuel cells: a study of surfactant effects on dispersion and catalysis. Ph.D. thesis, University of Birmingham.

Nguyen, Trang Thi Thu (2016) Hydrogen release and absorption in mixed anion lithium amide/lithium ternary nitride systems. Ph.D. thesis, University of Birmingham.

Nguyen, Trung Thanh (2011) Continuous dynamic optimisation using evolutionary algorithms. Ph.D. thesis, University of Birmingham.

Niazi, Ayda (2016) Real time measurement of oxygen by integrating a clark sensor with low cost printed circuit board technology and solid electrolyte membrane. Ph.D. thesis, University of Birmingham.

Nicholas, Melanie (2010) The conditioning of confectionery products. M.Res. thesis, University of Birmingham.

Nicholls, David (2010) Physical ageing in semi-crystalline polyethylene terephthalate. M.Res. thesis, University of Birmingham.

Nieves Bogonez, Francisco Daniel (2014) Fibre spreading and impregnation monitoring. M.Res. thesis, University of Birmingham.

Nieves Bogonez, Francisco Daniel (2017) Manufacturing and characterisation of a fibre optic acoustic emission sensor. Ph.D. thesis, University of Birmingham.

Niggebaum, Alexander (2016) Towards mobile quantum sensors for gravity surveys. Ph.D. thesis, University of Birmingham.

Niknafs, Nima (2011) Mechanistic understanding of emulsion formation during processing. Ph.D. thesis, University of Birmingham.

Ning, Weili (2015) Structural health condition monitoring of carbon-fibre based composite materials using acoustic emission techniques. M.Sc. thesis, University of Birmingham.

Niusha, Nikravesh (2017) Encapsulation of pancreatic beta cells. Ph.D. thesis, University of Birmingham.

Norman, Jenna Anne (2013) Functionalised iron(II) supramolecular helicates: design, synthesis and DNA binding studies. Ph.D. thesis, University of Birmingham.

Norouzi, Shahrouz (2014) Interaction of diesel type fuels and engine fuel system components in compression ignition engines. Ph.D. thesis, University of Birmingham.

Norouzian, Fatemeh (2015) Dual-band and switched-band highly efficient power amplifiers. Ph.D. thesis, University of Birmingham.

Norton, Abigail Belinda (2016) Microstructural understanding of hydrocolloid and mixed hydrocolloid systems for biomedical applications. Ph.D. thesis, University of Birmingham.

Norton, Jennifer Elizabeth (2012) Fat reduction in chocolate: a multidisciplinary approach considering emulsion science and consumer expectations. Ph.D. thesis, University of Birmingham.

Novak, Jan (2010) Visualisation of chemistry in flow. Ph.D. thesis, University of Birmingham.

Novakovic, Christopher (2015) Computing and estimating information leakage with a quantitative point-to-point information flow model. Ph.D. thesis, University of Birmingham.

Nowak, Emilia (2013) Bubbles – catalysts – oil interactions at elevated temperature and pressure in Fischer Tropsch synthesis. Ph.D. thesis, University of Birmingham.

Nowak, Igor Mateusz (2015) Development of heat resistant alloys for optimal creep performance. Eng.D. thesis, University of Birmingham.

Nugoolcharoenlap, Ekasit (2015) New design approach of antennas with integrated coupled resonator filters. Ph.D. thesis, University of Birmingham.

Nunez-Varela, Jose Ignacio (2013) Gaze control for visually guided manipulation. Ph.D. thesis, University of Birmingham.

O

O'Callaghan, Gregory Calum (2017) The serendipitous discovery of luminescent and liquid crystalline and photoconductive triphenoxazoles. Ph.D. thesis, University of Birmingham.

O'Sullivan, Jonathan James (2015) Applications of ultrasound for the functional modification of proteins and submicron emulsion fabrication. Eng.D. thesis, University of Birmingham.

Odili, Daniel Ifesinachi (2011) Simulation and microwave measurement of the conductivity of carbon nanotubes. Ph.D. thesis, University of Birmingham.

Oguh, Ukachukwu. I (2012) Multiphase contacting in PGM hydrometallurgy. Eng.D. thesis, University of Birmingham.

Ogunoiki, Adebola Oluwaseyi (2015) Artificial road input data generation tool for vehicle durability assessment using artificial intelligence. Ph.D. thesis, University of Birmingham.

Oheix, Emmanuel (2014) Development of polypyridine metal-dependent switches as artificial regulation sites. Ph.D. thesis, University of Birmingham.

Ojameruaye, Bendra Eloho (2016) A value and debt aware framework for evaluating compliance in software systems. Ph.D. thesis, University of Birmingham.

Ojo, Samuel Olukunle (2011) Damage detection in composites using e-glass fibre and small diameter optical fibre. M.Res. thesis, University of Birmingham.

Ojo, Samuel Olukunle (2017) Effect of surface treatment and recycling on the mechanical properties of e-glass. Ph.D. thesis, University of Birmingham.

Oliver, Gregory Thomas (2017) Quantum multicriticality. Ph.D. thesis, University of Birmingham.

Omar, Wahid (1998) The shear assessment of concrete beams with a honeycombed zone present in the high shear region. Ph.D. thesis, University of Birmingham.

Omonmhenle, Selina Ilunakan (2014) Clay derived materials for environmental management. Ph.D. thesis, University of Birmingham.

Onolaja, Olufunmilola Oladunni (2012) Dynamic data-driven framework for reputation management. Ph.D. thesis, University of Birmingham.

Ortenzi, Valerio (2017) Vision-based trajectory control of unsensored robots to increase functionality, without robot hardware modication. Ph.D. thesis, University of Birmingham.

Osborne, Shani Ann Marie (2017) Luminescent ruthenium nanoprobes for applications in dye sensitized solar cells. Ph.D. thesis, University of Birmingham.

Osibo, Oluwaponmile Olumayowa (2011) Removal of nitrogen containing hydrocarbons from wastewater by catalytic and non-catalytic hydrothermal oxidation, in sub- and supercritical conditions. Ph.D. thesis, University of Birmingham.

Osley, William Gruffydd (2014) Computational fluid dynamic modelling of enhanced heat transfer in tubes with inserts. M.Phil. thesis, University of Birmingham.

Ostadi-Valiabad, Hossein (2012) Micro and nano scale three-dimensional reconstruction of polymer electrolyte fuel cell porous layers. Ph.D. thesis, University of Birmingham.

Owen, Kylie Leanne (2013) Control of microstructure in poly-lactic acid and the effect on biodegradation. M.Res. thesis, University of Birmingham.

Owliya, Mohammad (2012) Agent-based holonic job allocation in manufacturing operations. Ph.D. thesis, University of Birmingham.

Ozuyar, Dogus (2015) Photometric investigations of several early-type variable stars using the stereo satellite. Ph.D. thesis, University of Birmingham.

O’Neale, Charlotte Alicia Susan (2015) Towards solitons in a 2D BEC apparatus. Ph.D. thesis, University of Birmingham.

P

Pahwa, Komal (2014) Magneto optical trapping of potassium-39 in a ring cavity. Ph.D. thesis, University of Birmingham.

Palabiyik, Ibrahim (2013) Investigation of fluid mechanical removal in the cleaning process. Ph.D. thesis, University of Birmingham.

Palaha, A.S. (2013) Multiplicity and mean transverse momentum of proton-proton collisions at $$\sqrt{s}$$ = 900 GeV, 2.76 and 7 TeV with ALICE at the LHC. Ph.D. thesis, University of Birmingham.

Palin, Robert John (2011) A comparison of cell wall properties of Arabidopsis thaliana. Ph.D. thesis, University of Birmingham.

Palmer, Andrew D (2014) Information processing for mass spectrometry imaging. Ph.D. thesis, University of Birmingham.

Palmer, Jody David (2014) Top cross section ratios as a test of lepton universality in charged weak decays in proton-proton collisions at $$\sqrt{s}$$ = 7 TeV with the atlas detector. Ph.D. thesis, University of Birmingham.

Pan, Meng (2010) Using multiple layers and surface roughness control for improving the sensitivity of SRP sensors. M.Phil. thesis, University of Birmingham.

Pan, Tianluo (2013) Scanning probe microscopy of poly-atomic molecules. Ph.D. thesis, University of Birmingham.

Pan, Xuemiao (2013) Membrane emulsification to produce perfume microcapsules. Ph.D. thesis, University of Birmingham.

Pancholi, Shriya A. (2015) Encapsulation of dried yeast cells as probiotics by tabletting. Ph.D. thesis, University of Birmingham.

Pang, Bo (2016) The defect evolution in shock loaded tantalum single crystals. Ph.D. thesis, University of Birmingham.

Panjwani, Hasnain (2012) Development of a torsion balance facility and a search for temporal variations in the Newtonian gravitational constant. Ph.D. thesis, University of Birmingham.

Panwisawas, Chinnapat (2013) Modelling and prediction of recrystallisation in single crystal superalloys. Ph.D. thesis, University of Birmingham.

Paolini, Alessandro (2016) The irreducible characters of Sylow p-subgroups of split finite groups of Lie type. Ph.D. thesis, University of Birmingham.

Papadopoulos, Kyriakos B. (2013) Set theoretic and topological characterisations of ordered sets. Ph.D. thesis, University of Birmingham.

Parekh, Jugal (2012) Minimally invasive approach for surgical treatment of proximal femur fractures. Ph.D. thesis, University of Birmingham.

Parimi, Lakshmi Lavanya (2014) Additive manufacturing of nickel based superalloys for aerospace applications. Ph.D. thesis, University of Birmingham.

Parish, Simon James (2010) Behavioural synthesis of analogue integrated circuits. Ph.D. thesis, University of Birmingham.

Park, Jun Mo (2010) Behaviours of bifilms in A356 alloy during solidification: developing observation techniques with 3-D micro x-ray tomography. M.Res. thesis, University of Birmingham.

Park, Mun Gyu (2014) RAMS management of railway systems. Ph.D. thesis, University of Birmingham.

Partlett, Christopher (2015) Asymmetry and other distributional properties in medical research data. Ph.D. thesis, University of Birmingham.

Parwana, Sudheer Singh (2011) Surface triangulation and the downstream effects on surface flattening. Ph.D. thesis, University of Birmingham.

Pascut, Aurelia (2015) Evolution of X-ray properties of galaxy groups. Ph.D. thesis, University of Birmingham.

Patel, Bhaven (2009) Peri-substituted dithianaphthalenes as sources of reactive intermediates in organic chemistry. Ph.D. thesis, University of Birmingham.

Patel, Purvi Shantilal (2010) Screw fixation of implants to the spine. Ph.D. thesis, University of Birmingham.

Patel, Sarika (2011) Optimising calcium phosphate cement formulations to widen clinical applications. Ph.D. thesis, University of Birmingham.

Paulin, Cynthia Béatrice Julie (2013) Progress towards the total synthesis of N-methylwelwitindolinone C isothiocyanate. Ph.D. thesis, University of Birmingham.

Pavey, Jonathan Michael (2014) Study of conventional annealing and laser annealing of vitreloy1b zr-based BMG. M.Res. thesis, University of Birmingham.

Pavlakos, Ilias (2012) Studies of cyclisation reactions of highly substituted diketopiperazines: new access to prenylated indole alkaloids. Ph.D. thesis, University of Birmingham.

Pawlik, Aleksandra Karolina (2012) Duplex emulsions for healthy foods. Eng.D. thesis, University of Birmingham.

Payne, Daniel Tony (2017) Synthesis of asymmetric DMAP derivatives and their applications in asymmetric catalysis and sensing. Ph.D. thesis, University of Birmingham.

Payne, Tristan Graeme (2011) Profiling the metabolome using Fourier transform ion cyclotron resonance mass spectrometry, optimised signal processing, noise filtering and constraints methods. Ph.D. thesis, University of Birmingham.

Pearmain, David (2011) Electron microscopy characterisation of size-selected Pd clusters and industrial Pd catalysts. Ph.D. thesis, University of Birmingham.

Pearson, Benjamin (2015) Characterisation and purification of bacterial lysates containing poly-γ-glutamic acid. M.Res. thesis, University of Birmingham.

Pearson, Richard John (2015) Mass estimation, dynamics and feedback in galaxy groups. Ph.D. thesis, University of Birmingham.

Pei, Chunlei (2014) DEM-CFD analysis of contact electrification and electrostatic interactions during powder handling processes. Ph.D. thesis, University of Birmingham.

Penchev, Pavel Nedyalkov (2016) Reconfigurable laser micro-processing systems: development of generic system-level tools for implementing modular laser micro-manufactoring platforms. Ph.D. thesis, University of Birmingham.

Penfold, Thomas James (2010) Simulating and controlling non-adiabatic effects in ultrafast photochemistry. Ph.D. thesis, University of Birmingham.

Peng, Tao (2016) Processing and characterization of multi-walled carbon nanotube reinforced aluminium metal matrix composite. Ph.D. thesis, University of Birmingham.

Perea-Ortiz, Marisa (2015) Progress towards a quantum simulator with cold atoms. Ph.D. thesis, University of Birmingham.

Pereira, Thiago Soares (2017) Bauschinger effect in macro and micro sized high strength low alloy pipeline steels. Ph.D. thesis, University of Birmingham.

Perera, Roland (2013) Interactive functional programming. Ph.D. thesis, University of Birmingham.

Perkins, Laura Mary (2009) Organic-inorganic hybrid materials: new functionalised polyoxotungstates. Ph.D. thesis, University of Birmingham.

Perreca, Antonio (2010) Experimental demonstration of displacement noise free interferometry. Ph.D. thesis, University of Birmingham.

Perry, Howard (2013) An approach to assessing the resilience of the water service in England and Wales – Can we answer the question: is the service resilient or brittle? M.Res. thesis, University of Birmingham.

Pescatore, L. (2016) Searching for new physics in b → sℓ$$^+$$ℓ$$^-$$ transitions at the LHCb experiment. Ph.D. thesis, University of Birmingham.

Petrov, Plamen Rumenov (2013) Strangeness enhancement in high multiplicity proton-proton collisions at $$\sqrt{s}$$ = 7 TeV with the ALICE detector at the LHC. Ph.D. thesis, University of Birmingham.

Phan, Vu Le (2016) Crash risk models for motorcycle-dominated traffic environment of urban roads in developing countries. Ph.D. thesis, University of Birmingham.

Phillipson, Kate (2016) Ageing and crystallisation of polycaprolactone. Ph.D. thesis, University of Birmingham.

Phoenix, Ben (2013) Synergistic and dose rate effects in Boron Neutron Capture Therapy. Ph.D. thesis, University of Birmingham.

Phoenix, Thomas (2011) Noise and the full counting statistics of a Coulomb blockaded quantum dot. Ph.D. thesis, University of Birmingham.

Phongtongpasuk, Siriporn (2011) Investigating the interaction of a metallosupra molecular cylinder with nucleic acids. Ph.D. thesis, University of Birmingham.

Phull, Harpinder Singh (2015) Investigation into Turbocharger crazing defect. Eng.D. thesis, University of Birmingham.

Piaszyk, Jakub (2012) Animal fat (tallow) as fuel for stationary internal combustion engines. Ph.D. thesis, University of Birmingham.

Pichot, Roman (2012) Stability and characterisation of emulsions in the presence of colloidal particles and surfactants. Ph.D. thesis, University of Birmingham.

Pickering, Lydia (2014) Ti-V-Mn based metal hydrides for hydrogen storage and compression applications. Ph.D. thesis, University of Birmingham.

Pike, Jeremy Andrew (2017) Quantitative microscopy workflows for the study of cellular receptor trafficking. Ph.D. thesis, University of Birmingham.

Pike, Thomas William (2015) Development and processing of solid oxide fuel cell materials. Ph.D. thesis, University of Birmingham.

Pinkney, Suzanne Zoe Renny (2016) Formulation of microfibrillated cellulose in vertically stirred media mills. Eng.D. thesis, University of Birmingham.

Pitkeathly, William Thomas Eric (2016) Four dimensional analysis of vesicle dynamics during directed cell migration. Ph.D. thesis, University of Birmingham.

Po-Sri, Chatuporn (2011) Elevated temperature crack growth in inertially welded nickel-based superalloys and gamma based titanium aluminides. Ph.D. thesis, University of Birmingham.

Pollard, Sarah Louise (2011) Processing and properties of titanium metal matrix composites. Eng.D. thesis, University of Birmingham.

Poole, Andrew David (2014) Development of a lean manufacturing method for the production of metallic fuel pump bearings. Eng.D. thesis, University of Birmingham.

Pope, Alexandra Jayne (2011) Supramolecular anticancer agents and their effects on cells and biomolecules. Ph.D. thesis, University of Birmingham.

Porras-Parral, Georgina (2011) The effect of electrical processing on mass transfer and mechanical properties of food materials. Ph.D. thesis, University of Birmingham.

Potoczny, Grzegorz A. (2012) Electro-mechanical behaviour of indium tin oxide coated polymer substrates for flexible electronics. Ph.D. thesis, University of Birmingham.

Powell, Adam R (2014) The fabrication of aluminium: carbon nanotube metal matrix composites. M.Phil. thesis, University of Birmingham.

Powis, Richard Alexander (2013) Crossed-beam laser spectroscopy of atomic ruthenium. Ph.D. thesis, University of Birmingham.

Pranzetti, Alice (2011) First step in the design and realisation of a 'smart' switchable surface. M.Res. thesis, University of Birmingham.

Pranzetti, Alice (2014) Switchable charged surfaces to regulate bacterial adhesion. Ph.D. thesis, University of Birmingham.

Prasad, Ashwini (2013) Application of electrostatics to align short-glass fibre bundles for composite manufacturing. M.Phil. thesis, University of Birmingham.

Preece, Katherine Elizabeth (2017) Protein extraction during soybase production: enhancing yields using cavitational techniques. Eng.D. thesis, University of Birmingham.

Preece, Russell James (2017) The use of a power model to assist the design of an energy harvesting data logger. MSc by Res thesis, University of Birmingham.

Prendergast, James W. (2010) Hydrogen desorption and absorption for activated magnesium hydride. Ph.D. thesis, University of Birmingham.

Prestly, Mark Robert (2013) Chiral lithium amides: reactivity studies and applications to target synthesis. Ph.D. thesis, University of Birmingham.

Pretorius, Cornelius Johannes (2013) Machining of titanium alloys with ultra-hard cutting tool materials. Ph.D. thesis, University of Birmingham.

Price, Richard Michael (2010) Using current uptime to improve failure detection in peer-to-peer networks. Ph.D. thesis, University of Birmingham.

Price, Sarah Ellen (2010) Ion mobility and mass spectrometric investigations of organophosphates related to chemical warfare agents and pesticides. Ph.D. thesis, University of Birmingham.

Price, Tony (2013) Digital calorimetry for future e$$^+$$e$$^-$$ linear colliders and their impact on the precision measurement of the top Higgs Yukawa coupling. Ph.D. thesis, University of Birmingham.

Pring, Lleyton James (2016) Soil-based analysis methods to aid the detection of cropmarks over buried features. Ph.D. thesis, University of Birmingham.

Pritchard, Hannah Louise (2015) Recognition agents for DNA and RNA quadruplex structures. Ph.D. thesis, University of Birmingham.

Pu, Guang (2017) Hybrid air bearings for high speed turbo machinery. Ph.D. thesis, University of Birmingham.

Puljiz, Mate (2017) On coarse graining and other fine problems. Ph.D. thesis, University of Birmingham.

Punch, Rachel Bridget (2014) Toughness enhancement of high strength low alloy strip steels. Ph.D. thesis, University of Birmingham.

Pylios, Theodoros (2010) A new metacarpophalangeal joint replacement arthroplasty. Ph.D. thesis, University of Birmingham.

Pérez Mohedano, Raúl (2016) Cleaning principles in automatic dishwashers. Eng.D. thesis, University of Birmingham.

Pörtsch, Asja (2012) The phase behaviour, flow behaviour, and interfacial properties of protein-polysaccharide aqueous two-phase systems with sugar. Ph.D. thesis, University of Birmingham.

Q

Qapo, Michael Keuork (2016) Nonlinear finite element modelling of FRP shear-strengthened prestressed and reinforced concrete beams. Ph.D. thesis, University of Birmingham.

Qi, Shaojun (2017) Fabrication and characterisation of graphene-based multi-functional coatings. Ph.D. thesis, University of Birmingham.

Qian, Cheng (2015) Determining principles for the development of virtual environments for future clinical applications. Ph.D. thesis, University of Birmingham.

Qin, Shunde (2016) Shear behaviour of corroded reinforced concrete t-beams repaired with fibre reinforced polymer systems. Ph.D. thesis, University of Birmingham.

Qiu, Chunlei (2010) Net-shape hot isostatic pressing of a nickel-based powder superalloy. Ph.D. thesis, University of Birmingham.

Quaid, Padraic Joseph (2017) Synthesis of novel chemical adjuvants for the modulation and study of CD1-d mediated immunological processes. Ph.D. thesis, University of Birmingham.

Qunoo, Hasan Najib Yousif (2012) Modelling and verifying dynamic access control policies using knowledge-based model checking. Ph.D. thesis, University of Birmingham.

Quraan, Mahran (2016) Modular multilevel converter with embedded battery cells for traction drives. Ph.D. thesis, University of Birmingham.

Qureshi, Omar Osman (2011) The modelling of ferrite-loaded helical devices. Ph.D. thesis, University of Birmingham.

R

Race, Alan M. (2016) Investigation and interpretation of large mass spectrometry imaging datasets. Ph.D. thesis, University of Birmingham.

Rafiee, Marjan (2014) Use of Positron Emission Particle Tracking (PEPT) for studying laminar mixing in static mixers. Ph.D. thesis, University of Birmingham.

Rahbar, Kiyarash (2016) Development and optimization of small-scale radial inflow turbine for waste heat recovery with organic rankine cycle. Ph.D. thesis, University of Birmingham.

Rahman, Alireza (2015) Control release from biopolymers. Ph.D. thesis, University of Birmingham.

Rai, Harvind Arjun (2017) Steady-state multiplicity and transient behaviour of a lumped-parameter solid oxide fuel cell. Ph.D. thesis, University of Birmingham.

Rakhodaei, Hamid (2013) Design and analysis of a 9 DOF : hybrid parallel robot. Ph.D. thesis, University of Birmingham.

Ralley, Kevin (2013) Few-photon transport in quasi-one-dimensional geometries. Ph.D. thesis, University of Birmingham.

Ramakrishnan, Praveen (2016) Processing of fluoro alumino-silicate glass-ceramics by Field Assisted Sintering Technology and honeycomb extrusion technique. Ph.D. thesis, University of Birmingham.

Ramirez-Leon, Jose Manuel (2015) An investigation of the ability of a numerical model to predict the cross sectional shape of an alluvial channel. Ph.D. thesis, University of Birmingham.

Ramsay, John Andrew (2017) Mixing of viscoelastic fluids. Ph.D. thesis, University of Birmingham.

Rana, Amrita Kaur (2014) Investigating novel drug targets and the biosynthetic pathways of lipids in mycobacteria. Ph.D. thesis, University of Birmingham.

Randall, Elizabeth Claire (2017) Development and integration of chemical imaging methods for applications in biomedical and pharmaceutical research. Ph.D. thesis, University of Birmingham.

Raslan, Alenezi (2010) Biodiesel production from different methods. Ph.D. thesis, University of Birmingham.

Rastegarpanah, Alireza (2016) A methodology for the Lower Limb Robotic Rehabilitation system. Ph.D. thesis, University of Birmingham.

Rasul, Jabar (2016) Investigating the use of stabilized subgrade soils for road pavements in Kurdistan. Ph.D. thesis, University of Birmingham.

Rathnayake , Asiri (2015) Semantics, analysis and security of backtracking regular expression matchers. Ph.D. thesis, University of Birmingham.

Ratniyomchai, Tosaphol (2016) Optimal design and control of stationary electrochemical double-layer capacitors for light railways. Ph.D. thesis, University of Birmingham.

Rattanakit, Rattanachai (2013) Optimisation of the aluminium compressor impeller machining process. Eng.D. thesis, University of Birmingham.

Raynaud, Guillaume (2014) Fibred contextual quantum physics. Ph.D. thesis, University of Birmingham.

Razon, Abigail R. (2017) An automated learner-based reading ability estimation strategy using concept indexing with integrated Part-of-Speech n-gram features. Ph.D. thesis, University of Birmingham.

Reading, Alan G (2014) On counting problems in nonstandard models of Peano arithmetic with applications to groups. Ph.D. thesis, University of Birmingham.

Redmore, Eleanor (2011) Surface treatment of a low-cost beta titanium alloy to combat wear. M.Res. thesis, University of Birmingham.

Redwood, Mark D (2008) Bio-hydrogen and biomass-supported palladium catalyst for energy production and waste-minimisation. Ph.D. thesis, University of Birmingham.

Reed, Daniel Thomas (2010) An investigation into the synthesis and characterisation of metal borohydrides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Reed, Kate (2013) Improving aesthetic measures for evolutionary vase design. M.Res. thesis, University of Birmingham.

Rees, Thomas Wheildon (2017) Bis-homoleptic, Terdentate, Cyclometalates of Group 8 and 9. Ph.D. thesis, University of Birmingham.

Reeve, Thomas Henry (2013) The method of fundamental solutions for some direct and inverse problems. Ph.D. thesis, University of Birmingham.

Rehren, Felix Gabriel (2015) Axial algebras. Ph.D. thesis, University of Birmingham.

Rehren, Felix Gabriel (2012) Operads and special algebras. M.Phil. thesis, University of Birmingham.

Ren, Chong (2013) Structural behaviour of cold-formed steel purlin-sheeting systems under uplift loading. Ph.D. thesis, University of Birmingham.

Ren, Juan (2012) An investigation of using micromachined silicon diaphragms in high temperature pressure sensors. Ph.D. thesis, University of Birmingham.

Reynolds, Phillip John (2012) A Surlyn® ionomer as a self-healing and self-sensing composite. M.Res. thesis, University of Birmingham.

Rezk, Ahmed Rezk Masoud (2012) Theoretical and experimental investigation of silica gel / water adsorption refrigeration systems. Ph.D. thesis, University of Birmingham.

Riaz, Samia (2014) Domain decomposition method for variational inequalities. Ph.D. thesis, University of Birmingham.

Riddell, Anthony Edward (2011) Development of an improved internal dose assessment methodology for plutonium. M.Phil. thesis, University of Birmingham.

Ridwan, . (2016) Reinforced concrete beam-column joints strengthened in shear with embedded bars. Ph.D. thesis, University of Birmingham.

Riley, Martin Jeffrey (2017) Microfibrillated cellulose: optimisation of production techniques. D.Eng. thesis, University of Birmingham.

Riley, Martin Jeffrey (2011) Towards inert cores for investment casting. M.Res. thesis, University of Birmingham.

Ritchie, John Murray (2009) Pressure loss and heat transfer for single-phase turbulent flow in tubes fitted with wire-matrix inserts. Eng.D. thesis, University of Birmingham.

Rizzo, Gaia (2016) Understanding the effect of formulation and processing parameters on microstructural and physical properties of ice cream, sensory perception and appetite. Ph.D. thesis, University of Birmingham.

Roach, Nicholas (2011) The effect of multimodal data sources in parallel on the accuracy and reliability of optical motion capture of human subjects. Ph.D. thesis, University of Birmingham.

Roach, Peter J (2013) Electrophoretic deposition of primary coat onto investment casting wax patterns. Ph.D. thesis, University of Birmingham.

Robbins, Kate Elizabeth (2017) Secondary crystallisation and degradation during long term aging of P(HB-co-HV). Ph.D. thesis, University of Birmingham.

Roberts, Josh (2013) The analysis of kickpoints in carbon fibre composite golf shafts. M.Res. thesis, University of Birmingham.

Roberts, Kieran (2012) Lie algebras and incidence geometry. Ph.D. thesis, University of Birmingham.

Roberts, William Michael (2012) The synthesis and characterisation of lead-free piezoelectric ceramics. M.Res. thesis, University of Birmingham.

Robertson, Christopher (2015) Vibronic coupling, symmetry and dynamics in unsaturated hydrocarbons. Ph.D. thesis, University of Birmingham.

Robinson, Andrew (2015) Use of methods to investigate transport phenomena of multiphase turbulent flow. Ph.D. thesis, University of Birmingham.

Robinson, Edward Robert (2011) Resource allocation via competing marketplaces. Ph.D. thesis, University of Birmingham.

Robinson, Jonathan Peter (2014) Imaging of root canal preparation. Ph.D. thesis, University of Birmingham.

Rocher, Mathias (2010) Towards interlocked structures based on H-bonded barbiturate complexes. Ph.D. thesis, University of Birmingham.

Rodan, Ali (2012) Architectural designs of Echo State Network. Ph.D. thesis, University of Birmingham.

Rodgers, Anthony David (2017) Bayesian inference from terrestrial gravimetry measurements of near-surface anomalies using a bespoke reversible-jump Markov chain Monte Carlo algorithm. Ph.D. thesis, University of Birmingham.

Rodrigues Coelho, Hugo (2017) Asteroseismology of cool stars: testing scaling laws and detecting signatures of rapid structure variation. Ph.D. thesis, University of Birmingham.

Rodriguez Zamora, Penelope (2014) Study of the desmoplakin protein using nuclear magnetic resonance spectroscopy and its interaction with gold nanoclusters using atomic force microscopy. Ph.D. thesis, University of Birmingham.

Rodríguez Sanmartín, Daniel (2011) Smart piezoelectric devices for X-ray optics applications. Ph.D. thesis, University of Birmingham.

Roe, Jessie Louise (2011) Characterising natural organic matter in surface waters and the minimisation of disinfection by-product formation. Ph.D. thesis, University of Birmingham.

Roger, Thomas (2013) Time resolved ultrafast dynamic excitations in semiconductors. Ph.D. thesis, University of Birmingham.

Rogers, Nicola Jane (2014) The development of gold nanoparticles labelled with transition metal complexes for imaging applications. Ph.D. thesis, University of Birmingham.

Rois Anwar, Nurul Zaizuliana (2016) Removal of crystalline confectionery material from hard surfaces. Ph.D. thesis, University of Birmingham.

Roman Corrochano, Borja (2017) Advancing the engineering understanding of coffee extraction. Eng.D. thesis, University of Birmingham.

Roman Ramirez, Luis Antonio (2015) Vapour – liquid equilibria of acetic acid + water and propanoic acid + water: experimental measurement and thermodynamic modelling. Ph.D. thesis, University of Birmingham.

Romano, Angela (2013) Leptonic decays and kaon identification at the NA62 experiment at CERN. Ph.D. thesis, University of Birmingham.

Roper, Simon Edward (2010) A room acoustics measurement system using non-invasive microphone arrays. Ph.D. thesis, University of Birmingham.

Roque, Ricardo Miguel Nunes (2014) Hydrolysis of lignocellulosic biomass by a modified organosolv method on a biorefinery perspective – example of Miscanthus χ giganteus. Ph.D. thesis, University of Birmingham.

Rose, Heather E.L. (2013) Magnetic resonance imaging of flow instabilities. Ph.D. thesis, University of Birmingham.

Roshanmanesh, Sanaz (2015) Matched load for WR03 waveguides. M.Sc. thesis, University of Birmingham.

Rossiter, James (2011) Multimodal intent recognition for natural human-robotic interaction. Ph.D. thesis, University of Birmingham.

Rounce, Paul Lindsey (2011) Engine performance and particulate matter speciation for compression ignition engines powered by a range of fossil and biofuels. Ph.D. thesis, University of Birmingham.

Roussakis, Yiannis G. (2016) Strategies for adaptive radiotherapy: towards clinically efficient workflows. Ph.D. thesis, University of Birmingham.

Roussel, Jimmy (2013) Metal behaviour in anaerobic sludge digesters supplemented with trace nutrients. Ph.D. thesis, University of Birmingham.

Routledge, David Philip (2013) Joining of NiTi-based shape memory alloys to Ti-6Al-4V. Eng.D. thesis, University of Birmingham.

Rowan, Mark Stephen (2013) Information-selectivity of alzheimer's disease progression. Ph.D. thesis, University of Birmingham.

Rowley, Laura Elizabeth (2015) Determining the cellular localisation of novel cancer therapeutics. Ph.D. thesis, University of Birmingham.

Rowshandel, Hamed (2014) The development of an autonomous robotic inspection system to detect and characterise rolling contact fatigue cracks in railway track. Ph.D. thesis, University of Birmingham.

Rueffer, Mareike (2010) Collinear laser spectroscopy of neutron-rich niobium. Ph.D. thesis, University of Birmingham.

Rungthonkit, Prathan (2012) Structural behaviour of structural insulated panels (SIPS). Ph.D. thesis, University of Birmingham.

Rusu, Marius Florin (2017) Automation of railway switch and crossing inspection. Ph.D. thesis, University of Birmingham.

Ruszala, Matthew James Amor (2013) Fines reduction and energy optimisation in aggregates production. M.Res. thesis, University of Birmingham.

Rutter, Julie (2013) Synthesis and characterisation of new phosphate and fluorophosphate materials. Ph.D. thesis, University of Birmingham.

Ryan, David Jonathan (2015) Investigation of fluid dynamics and emulsification in Sonolator liquid whistles. Eng.D. thesis, University of Birmingham.

S

Saad, Nor Hayati (2010) Modelling and performance evaluation of coupled micro resonator array for artificial nose. Ph.D. thesis, University of Birmingham.

Sabeghi Saroui, Behrang (2015) Recognition of mathematical handwriting on whiteboards. Ph.D. thesis, University of Birmingham.

Sabouri, Aydin (2015) Nanofabrication by means of focused ion beam. Ph.D. thesis, University of Birmingham.

Sadawi, Noureddin (2013) A rule-based approach for recognition of chemical structure diagrams. Ph.D. thesis, University of Birmingham.

Sadeghioon, Ali Mollazadeh (2015) Design and development of wireless underground sensor networks for pipeline monitoring. Ph.D. thesis, University of Birmingham.

Sadehi, Hamid (2017) Effect of frequency on the failure of articular cartilage. Ph.D. thesis, University of Birmingham.

Sadler, Matthew James (2011) Diastereoselective synthesis of 2,4,5 trisubstituted piperidines: application in natural product synthesis. Ph.D. thesis, University of Birmingham.

Sadovnikova, Viktoriia (2012) Combining supramolecular cylinders with a platinum anticancer agent. Ph.D. thesis, University of Birmingham.

Saedon, Juri Bin (2012) Micromilling of hardened (62 HRC) AISI D2 cold work tool steel. Ph.D. thesis, University of Birmingham.

Safavi, Saeid (2015) Speaker characterization using adult and children’s speech. Ph.D. thesis, University of Birmingham.

Saigol, Zeyn A. (2011) Automated planning for hydrothermal vent prospecting using AUVs. Ph.D. thesis, University of Birmingham.

Saint-Dizier, François (2016) The total synthesis of concavine. Ph.D. thesis, University of Birmingham.

Sakulsermsuk, Sumet (2011) Molecular manipulation with the scanning tunnelling microscope. Ph.D. thesis, University of Birmingham.

Salaiwarakul, Anongporn (2010) Verification of secure biometric authentication protocols. Ph.D. thesis, University of Birmingham.

Salazar Lechuga, Maximino (2009) Multi-objective optimisation using sharing in swarm optimisation algorithms. Ph.D. thesis, University of Birmingham.

Saleh, Negar (2014) The effect of impeller type on hydrodynamics and concentration distribution of composite wood pellets suspended in water in a stirred reactor. M.Phil. thesis, University of Birmingham.

Salisbury, Victoria Alice (2017) High resolution imaging and analysis of endothelial tubulogenesis and blood vessel formation. Ph.D. thesis, University of Birmingham.

Sallustrau, Antoine (2014) Synthesis of ferrocenyl derivatives as novel nucleic analogue monomers. Ph.D. thesis, University of Birmingham.

Samperi, Katrina (2016) Using trails to improve map generation for virtual agents in large scale, online environments. Ph.D. thesis, University of Birmingham.

Samsudin, Nur Hana (2017) A study on reusing resources of speech synthesis for closely-related languages. Ph.D. thesis, University of Birmingham.

Samsudin, Sani Amril (2010) The thermal behaviour and isothermal crystallisation of cyclic poly(butylene terephthalate)and its blends. Ph.D. thesis, University of Birmingham.

Sanchez-Cano, Carlos (2009) Biomolecular interactions and cellular effects of steroidal and metallosupramolecular metallodrugs. Ph.D. thesis, University of Birmingham.

Sandells, Jamie Ian (2014) Mathematical modelling of planar solid oxide fuel cells. Ph.D. thesis, University of Birmingham.

Sands, Jonathan David (2015) Current oscillations arising from nonlinear chemical dynamics in solid oxide fuel cells. Ph.D. thesis, University of Birmingham.

Sangaralingam, Vinothini (2012) STRESS - STEREO transiting exoplanet and stellar survey. Ph.D. thesis, University of Birmingham.

Sangha, Pavan (2015) An introduction to the theory of random graphs. M.Res. thesis, University of Birmingham.

Santos-Murphy , Sarah Maria (2014) Ice cream: an approach considering formulation microstructure and eating behaviour. Ph.D. thesis, University of Birmingham.

Sanyang, Momodou Lamin (2017) Large scale estimation of distribution algorithms for continuous optimisation. Ph.D. thesis, University of Birmingham.

Sarsby, Joscelyn (2016) Liquid micro-junction surface sampling and MALDI imaging of small and large molecules in human liver disease. Ph.D. thesis, University of Birmingham.

Sato, Atsushi (2012) Nickel-based single crystal superalloys for industrial gas turbines. Ph.D. thesis, University of Birmingham.

Sattar, Anwar (2015) Hydrogen production from biomass for use in solid oxide fuel cells. Ph.D. thesis, University of Birmingham.

Savage, Alison Clare (2014) Controlled coating of nanoparticles with peptides and lanthanide complexes: a photophysical evaluation. Ph.D. thesis, University of Birmingham.

Savage, Andrew Patrick (2015) An investigation into the use of flow-focusing atomization with spray drying for the production of narrow particle size distributions. Ph.D. thesis, University of Birmingham.

Savva, Savvaki, N (2016) New materials for strontium removal from nuclear waste streams. Ph.D. thesis, University of Birmingham.

Sawasdichai, Araya (2010) An estimation of risk of Colles’ fracture using model-based interpretation of bone profiles. M.Res. thesis, University of Birmingham.

Sawatmongkhon, Boonlue (2012) Modelling of catalytic aftertreatment of NOx emissions using hydrocarbon as a reductant. Ph.D. thesis, University of Birmingham.

Scarpantonio, Luca (2011) Studies of DNA binding of lanthanide platinum complexes. Ph.D. thesis, University of Birmingham.

Schennach, Friederike (2012) Oxidation of two different Pt-aluminised bond coats. Ph.D. thesis, University of Birmingham.

Schlotjes, Megan Rose (2013) The development of a diagnostic approach to predicting the probability of road pavement failure. Ph.D. thesis, University of Birmingham.

Schlueter, Martin (2012) Nonlinear mixed integer based optimization technique for space applications. Ph.D. thesis, University of Birmingham.

Schrӧder, Florian (2013) Modelling and Validation of Linear friction welding of Ti-6Al-4V for aeroengine application. Ph.D. thesis, University of Birmingham.

Scott, Patrick Aaron (2013) Search for medium effects with jet-like hadron correlations at ALICE at the LHC. Ph.D. thesis, University of Birmingham.

Scott, W H (2011) The effect of potential large-scale bioreactor environmental heterogeneities during fed-batch culture on the performance of an industrially-relevant GS-CHO cell culture, producing an IgG antibody. Ph.D. thesis, University of Birmingham.

Scotti, Lucia (2016) First-principles study of solute diffusion mechanisms in alpha-Ti. Ph.D. thesis, University of Birmingham.

Sedaie Bonab, Nazita (2015) Influence of solvent and scaleup upon the hydrogenation of 4-phenyl-2-butanone. Ph.D. thesis, University of Birmingham.

Semeraro, Jason Philip Gino (2010) ZJ-type theorems for fusion systems. M.Phil. thesis, University of Birmingham.

Sempewo, Jotham Ivan (2013) Transitioning of urban water distribution systems. Ph.D. thesis, University of Birmingham.

Shah, Amjad (2011) Experimental optimization of the CAPRI process. Ph.D. thesis, University of Birmingham.

Shah, Janvi Pankaj (2016) Resilient geotechnical asset management. Ph.D. thesis, University of Birmingham.

Shah, Seyyed Madasar Ali (2012) Model transformation dependability evaluation by the automated creation of model generators. Ph.D. thesis, University of Birmingham.

Shahjahan, Muhammad (2010) Materials considered for pavement and embankment design. M.Phil. thesis, University of Birmingham.

Shang, Jinlei (2014) The role of hydrogen and fuel cells for ultra low carbon vehicles. Ph.D. thesis, University of Birmingham.

Shang, Xiaobang (2011) SU-8 micromachined terahertz waveguide circuits and coupling matrix design of multiple passband filters. Ph.D. thesis, University of Birmingham.

Shapcott, Stephen (2015) Characterisation of aluminium armour alloy AA7017-T651. M.Res. thesis, University of Birmingham.

Sharifi, Soroosh (2009) Application of evolutionary computation to open channel flow modelling. Ph.D. thesis, University of Birmingham.

Shen, Ao (2014) The selective use of gaze in automatic speech recognition. Ph.D. thesis, University of Birmingham.

Shen, Lingjia (2016) Spin and lattice structures in materials with competing interactions investigated by neutron scattering techniques. Ph.D. thesis, University of Birmingham.

Shenaiber, Nourah (2015) Analyzing the selection of the herbrand base process for building a Smart Semantic Tree Theorem Prover. Ph.D. thesis, University of Birmingham.

Shenker, Joshua (2015) The compatibility of semi-synthetic engine oil with conventional diesel and biodiesel fuels. Ph.D. thesis, University of Birmingham.

Sheridan, Richard Stuart (2014) Optimisation of HDDR processing parameters of sintered NDFEB magnets. Ph.D. thesis, University of Birmingham.

Shi, Baosheng (2015) Development of an MOF based adsorption air conditioning system for automotive application. Ph.D. thesis, University of Birmingham.

Shi, Rui (2013) The dynamic impacts of electric vehicle integration on the electricity distribution grid. M.Phil. thesis, University of Birmingham.

Shi, Shengrun (2015) Evaluating the structural integrity of high strength low alloy steels considered for shipbuilding using acoustic emission. M.Res. thesis, University of Birmingham.

Shin, J. Felix (2012) New electrolyte materials for solid oxide fuel cells. Ph.D. thesis, University of Birmingham.

Shingari, Vishant (2015) Introduction of novel interactive technologies into demanding healthcare contexts. M.Phil. thesis, University of Birmingham.

Shirgiri, Nastaran (2014) Correlation between geotechnical and geophysical properties of soil. M.Phil. thesis, University of Birmingham.

Shotton-Gale, Nicholas Edward Harry (2013) Clean filament winding: process optimisation. Ph.D. thesis, University of Birmingham.

Shyha, Islam Saad Elsayed Mohamed (2010) Drilling of carbon fibre reinforced plastic composites. Ph.D. thesis, University of Birmingham.

Siavashi, Kiavash (2012) The effect of casting parameters on the fluidity and porosity of aluminium alloys in the aost foam casting process. Ph.D. thesis, University of Birmingham.

Sierros, Konstantinos A. (2006) Mechanical properties and characterisation of substrates for flexible displays. Ph.D. thesis, University of Birmingham.

Siggs, Eirian Bethany (2010) Laser and electron beam treatments for corrosion protection of friction stir welds in aerospace alloys. Eng.D. thesis, University of Birmingham.

Silmon, Joseph A. (2009) Operational industrial fault detection and diagnosis: railway actuator case studies. Ph.D. thesis, University of Birmingham.

Simmons, Jonathan Andrew (2015) Modelling and simulation of the formation of single phase and compound fluid volumes. Ph.D. thesis, University of Birmingham.

Simms, Henry George (2011) Oxidation behaviour of Austenitic stainless steels at high temperature in supercritical plant. M.Res. thesis, University of Birmingham.

Simpson, Christopher (2015) Microstructural and mechanical characterisation of the IW Ni-base superalloy RR1000. Ph.D. thesis, University of Birmingham.

Simpson, David Peter (2014) One dimensional transport of ultracold bosons. Ph.D. thesis, University of Birmingham.

Simpson, George Innes (2012) An investigation into thin film palladium alloy composite membranes with a powdered tungsten intermediate layer for the separation of hydrogen. M.Res. thesis, University of Birmingham.

Simpson, Matthew James (2010) Ion-molecule reaction mass spectrometry and vacuum-ultraviolet negative photoion spectroscopy. Ph.D. thesis, University of Birmingham.

Sindall, Rebecca Clare (2015) Increasing the efficiency of anaerobic waste digesters by optimising flow patterns to enhance biogas production. Ph.D. thesis, University of Birmingham.

Singh, Preabjot Kaur (2013) Investigating the Mg-Li systems using different compositions for the purpose of hydrogen storage. M.Res. thesis, University of Birmingham.

Siriwatcharapiboon, Wilai (2013) The electrochemistry of metal nanoparticles for oxygen reduction and nitrate/nitrite reduction. Ph.D. thesis, University of Birmingham.

Sitshebo, Simbarashe Wilson Timothy (2011) HC-SCR of NO$$_x$$ emissions over Ag-AL$$_2$$O$$_3$$ catalysts using diesel fuel as a reductant. Ph.D. thesis, University of Birmingham.

Skaik, Talal (2011) Synthesis of coupled resonator circuits with multiple outputs using coupling matrix optimization. Ph.D. thesis, University of Birmingham.

Skuse, Thomas Richard (2016) The use of Positron Emission Particle Tracking (PEPT) to determine the grinding mechanisms within a vertically stirred media mill. Ph.D. thesis, University of Birmingham.

Slack, Nathan William (2011) Simulations for the International X-ray Observatory. Ph.D. thesis, University of Birmingham.

Slater, Carl (2012) The static and dynamic behaviour of carbon fibre composites used in golf club shafts. Ph.D. thesis, University of Birmingham.

Slater, Colin (2012) Synthesis and characterisation of amorphous bioceramics. Ph.D. thesis, University of Birmingham.

Smale, Jonathan Ross (2012) Fitting and using model Hamiltonian in non-adiabatic molecular dynamics simulations. Ph.D. thesis, University of Birmingham.

Smart, Matthew James (2012) Anonymity vs. traceability: revocable anonymity in remote electronic voting protocols. Ph.D. thesis, University of Birmingham.

Smeeton, Lewis Conrad (2015) Exploration and characterisation of the energy landscapes of biomolecules and hydrated ions. Ph.D. thesis, University of Birmingham.

Smila-Castro, Ornella (2012) X-ray absorption spectroscopy studies of electrochemical processes. Ph.D. thesis, University of Birmingham.

Smith, Alaric (2014) Synthesis and characterisation of novel oxyanion doped materials for use in solid oxide fuel cells. Ph.D. thesis, University of Birmingham.

Smith, Alexander Ian (2015) On the design of finite-state type systems. Ph.D. thesis, University of Birmingham.

Smith, Andrew (2013) The fluid mechanics of embryonic nodal cilia. Ph.D. thesis, University of Birmingham.

Smith, Catherine Franklin (2017) Study of the molecular behaviour of ionic liquid colloidal suspension using rheometry and NMR. Ph.D. thesis, University of Birmingham.

Smith, Craig Anthony (2013) Production and evaluation of waste and short-fibre composites. M.Res. thesis, University of Birmingham.

Smith, Kenneth Baird (2015) Crystallisation of active pharmaceutical ingredients using ionic liquids. Ph.D. thesis, University of Birmingham.

Smith, Lyndsie Laura (2016) A transportable strontium optical lattice clock towards space. Ph.D. thesis, University of Birmingham.

Smith, Mark James (2012) Quasi-classical theory of weakly anisotropic superconductors. Ph.D. thesis, University of Birmingham.

Smith, Philip J (2017) Optimisation of computational, biological and physical methods to study the cellular entry of nanoparticles. Ph.D. thesis, University of Birmingham.

Smith, Phillip (2017) Sentiment analysis of patient feedback. Ph.D. thesis, University of Birmingham.

Smith, Robin (2017) Experimental measurements of break-up reactions to study alpha clustering in carbon-12 and beryllium-9. Ph.D. thesis, University of Birmingham.

Smith, Rory James Edwin (2013) Gravitational-wave astronomy with coalescing compact binaries: detection and parameter estimation with advanced detectors. Ph.D. thesis, University of Birmingham.

Smyth, Ben (2011) Formal verification of cryptographic protocols with automated reasoning. Ph.D. thesis, University of Birmingham.

Snodin, Katie Amelia (2011) The effects of sustained load (crack growth) testing in inertia friction welded Udimet 720Li turbine disc alloy at elevated temperatures. M.Res. thesis, University of Birmingham.

Soares, Rodrigo Gabriel Ferreira (2014) Cluster-based semi-supervised ensemble learning. Ph.D. thesis, University of Birmingham.

Soe, Yadanar (2017) Construction supply chain risk management framework for construction projects: case studies in Myanmar. Ph.D. thesis, University of Birmingham.

Sommerville, Roberto Peter Zygmunt (2013) Utilisation of coal fly ash in the manufacture of useful materials. M.Res. thesis, University of Birmingham.

Sommerville, Roberto Peter Zygmunt (2017) Utilisation of fly ash in the manufacture of zeolites. Ph.D. thesis, University of Birmingham.

Song, Mi Yeon (2009) Microfabrication of silicon tips for scanning probe microscopy. Ph.D. thesis, University of Birmingham.

Song, Xiaoning (2011) Microstructure and mechanical properties of electrodeposited copper films. M.Phil. thesis, University of Birmingham.

Soper, David (2014) The aerodynamics of a container freight train. Ph.D. thesis, University of Birmingham.

Sorrell, Jessica (2011) Characterisation of Silsesquioxane-Poly(Methyl Methacrylate) blends. M.Res. thesis, University of Birmingham.

Sosa Paz, Carlos (2010) Numerical optimisation methods for power consumption in multi-hop mobile phone networks. Ph.D. thesis, University of Birmingham.

Spencer, Matthew Richard (2014) Gas turbine lubricant evaluation. Eng.D. thesis, University of Birmingham.

Spencer, Simeon James Matthew (2011) Improvement and characterisation of pixelated Cadmium-Zinc-Telluride detectors for use in neutrino-less double-beta decay searches. Ph.D. thesis, University of Birmingham.

Sprittles, James Edward (2010) Dynamic wetting/dewetting processes in complex liquid-solid systems. Ph.D. thesis, University of Birmingham.

Squire, Peter James (2009) Development of multi-component iron-based amorphous alloy. Ph.D. thesis, University of Birmingham.

Staden, Katherine (2015) Robust expansion and hamiltonicity. Ph.D. thesis, University of Birmingham.

Staffell, Iain (2010) Fuel cells for domestic heat and power: are they worth it? Ph.D. thesis, University of Birmingham.

Staite, Christopher (2012) Identity management architecture and implementation: evaluation and improvement. Ph.D. thesis, University of Birmingham.

Stamatopoulos, Konstantinos (2017) Development of a biorelevant dynamic model of human proximal colon: a tool for designing colon – specific drug delivery systems. Ph.D. thesis, University of Birmingham.

Standring, Thomas Richard (2016) Design and development of the carrier system for ceramic core fabrication. Eng.D. thesis, University of Birmingham.

Stedman, Richard James (2014) The restriction and Kakeya conjectures. M.Phil. thesis, University of Birmingham.

Steele, Heather Jane (2017) Finding solutions for complex systems: saving traction energy in rail. Ph.D. thesis, University of Birmingham.

Stenson, John Douglas (2009) Investigating the mechanical properties of yeast cells. Ph.D. thesis, University of Birmingham.

Stephens, Deborah Ann (2011) Structural and magnetic characterisation of some mixed metal oxides and oxyhalides. Ph.D. thesis, University of Birmingham.

Stephenson-Brown, Alexander James (2015) Synthetic sensors for saccharides and glycoproteins. Ph.D. thesis, University of Birmingham.

Steven, Rory Thomas (2014) Investigations in MALDI-MSI using a high repetition rate laser. Ph.D. thesis, University of Birmingham.

Stevens, Peter Alastair (2015) Shear zone properties of inertia friction welds. Eng.D. thesis, University of Birmingham.

Stevenson, Simon Paul (2017) Insights into binary black hole formation from gravtitational waves. Ph.D. thesis, University of Birmingham.

Stewart, Edward James Charles (2012) A distributed instrumentation system for the acquisition of rich, multi-dimensional datasets from railway vehicles. Ph.D. thesis, University of Birmingham.

Stockton, Mark Christopher (2010) Isolated direct photon production and the Atlantis event display for the ATLAS experiment. Ph.D. thesis, University of Birmingham.

Street, Steven Richard (2017) Atmospheric corrosion of austenitic stainless steels. Ph.D. thesis, University of Birmingham.

Strygin, Maxim (2014) Semantics and logics for signals. Ph.D. thesis, University of Birmingham.

Stylianou, Constantina (2011) A decision support tool for road safety management in Cyprus. M.Phil. thesis, University of Birmingham.

Su, Haolin (2015) Properties of concrete with recycled aggregates as coarse aggregate and as-received/surface-modified rubber particles as fine aggregate. Ph.D. thesis, University of Birmingham.

Su, Shei Sia (2012) Development of hypereutectic Al-Si based P/M alloys. Ph.D. thesis, University of Birmingham.

Su, Tina Yu-Ting (2014) Deformation twinning in magnesium using nano-indentation. M.Phil. thesis, University of Birmingham.

Sukjit, Ekarong (2013) Synergistic effects of alcohol-based renewable fuels: fuel properties and emissions. Ph.D. thesis, University of Birmingham.

Suleiman, Aminu (2016) Multivariate study of vehicle exhaust particles using machine learning and statistical techniques. Ph.D. thesis, University of Birmingham.

Sullivan, Eirin Courtney (2009) Anion manipulation in perovskite-related materials. Ph.D. thesis, University of Birmingham.

Sulu, Michael (2010) The process intensification of biological hydrogen production by Escherichia coli HD701. Ph.D. thesis, University of Birmingham.

Sun, Hao (2014) Research on a new hybrid wind turbine system. Ph.D. thesis, University of Birmingham.

Sun, Jifeng (2013) Time-dependent crack growth in a coarse-grained Ni-based superalloy RR1000. Ph.D. thesis, University of Birmingham.

Sunmola, Funlade Tajudeen (2013) Optimising learning with transferable prior information. Ph.D. thesis, University of Birmingham.

Surowiec, Agata (2011) Strategic change in the UK railway network through reorganization and major projects. M.Phil. thesis, University of Birmingham.

Suryanarayanan, Vinoth (2012) Synchronised range queries. Ph.D. thesis, University of Birmingham.

Swan, Jason David (2016) Durville casting of nickel-iron valve bars. Ph.D. thesis, University of Birmingham.

Swan, Roger William (2015) Optimisation of water treatment works using Monte-Carlo methods and genetic algorithms. Ph.D. thesis, University of Birmingham.

Swinbank, Richard (2008) Virtual forced splitting in multidimensional access methods. Ph.D. thesis, University of Birmingham.

Symes, Daniel (2011) Sonoelectrochemical (20 khz) production of hydrogen from aqueous solutions. M.Res. thesis, University of Birmingham.

Symes, Daniel Robert (2015) Development of on-demand low temperature electrolysers and their systems. Ph.D. thesis, University of Birmingham.

T

Tade, Oluwabunmi O. (2014) Negative impedance converter for antenna matching. Ph.D. thesis, University of Birmingham.

Tahhan Antar, Mohammad (2011) Minimum damage wire electrical discharge machining of aerospace alloys. Ph.D. thesis, University of Birmingham.

Tam, Kin Po (2010) Optimizing and approximating eigenvectors in max-algebra. Ph.D. thesis, University of Birmingham.

Tamblyn, Richard John (2009) Analysis of energy requirements in stirred media mills. Eng.D. thesis, University of Birmingham.

Tamuang, Suparb (2012) Mesoporous silica supported catalysts for carbon-carbon bond forming reactions. Ph.D. thesis, University of Birmingham.

Tan, Cheng (2015) Model based control for a modern automotive diesel engine. Ph.D. thesis, University of Birmingham.

Tan, Wei En (2017) Waiter–Client and Client–Waiter games. Ph.D. thesis, University of Birmingham.

Tanangteerapong, Duangkanok (2015) Understanding the physiology of probiotic yeast cells under different formulation, processing and environmental conditions. Ph.D. thesis, University of Birmingham.

Tang, Fengzhen (2015) Kernel methods for time series data. Ph.D. thesis, University of Birmingham.

Tanhaei, Ghazal (2016) A power-scalable variable-length analogue DFT processor for multi-standard wireless transceivers. Ph.D. thesis, University of Birmingham.

Tanner, Joseph Leo (2010) Fabrication and characterisation of multilayer test structures for coated conductor cylinder technology. Ph.D. thesis, University of Birmingham.

Tantisatirapong, Suchada (2015) Texture analysis of multimodal magnetic resonance images in support of diagnostic classification of childhood brain tumours. Ph.D. thesis, University of Birmingham.

Tao, Tao (2013) Modelling of laser repair of single crystal nickel based superalloys. M.Phil. thesis, University of Birmingham.

Tapah, Boris Fotso (2014) Processing of organic waste by catalytic supercritical water gasification. Ph.D. thesis, University of Birmingham.

Tariq, Abubakar (2013) Vital signs monitoring using Doppler radar and on-body antennas. Ph.D. thesis, University of Birmingham.

Tarrant, Luke (2012) Formulation and development of ceramic mould materials for investment casting. Eng.D. thesis, University of Birmingham.

Tarrant, Neil James (2010) Asteroseismology from the main sequence to giant stars. Ph.D. thesis, University of Birmingham.

Taylor, Amelia May (2017) Substructures in large graphs. Ph.D. thesis, University of Birmingham.

Taylor, Benjamin Luke (2015) Reaction systems and phase development for investment casting ceramics. Ph.D. thesis, University of Birmingham.

Taylor, Brian John Sidney (2017) Aspects of anisotropic harmonic analysis beyond Calderón-Zygmund Theory. Ph.D. thesis, University of Birmingham.

Taylor, James David (2011) Total synthesis of nemorosone and nemorosone II. Ph.D. thesis, University of Birmingham.

Taylor, Mark Stewart (2011) Stabilisation of water-in-oil emulsions to improve the emollient properties of lipstick. M.Res. thesis, University of Birmingham.

Taylor, Scott (2010) Investigation into the improved dispersion of nickel oxide over the surface of SOFC tubular anodes. M.Res. thesis, University of Birmingham.

Taylor, Scott (2012) Recovery of platinum group metals from waste sources. M.Phil. thesis, University of Birmingham.

Tchuenbou-Magaia, Fideline Laure (2012) Hydrophobins and air filled emulsions. Ph.D. thesis, University of Birmingham.

Tedds, Steven Paul (2011) Microporous materials for hydrogen storage. Ph.D. thesis, University of Birmingham.

Terry, William David (2017) Cluster production in the matrix assembly cluster source. Ph.D. thesis, University of Birmingham.

Tharakan, Ajay (2009) Modelling of physical and chemical processes in the small intestine. Eng.D. thesis, University of Birmingham.

Thomas, Andrew Mark (2010) Measurement of electromagnetic signal velocities in saturated fine-grained soils. Ph.D. thesis, University of Birmingham.

Thomas, Rachel Elizabeth (2010) High temperature processing of kaolinitic materials. Eng.D. thesis, University of Birmingham.

Thompson, Laura (2013) Synthesis and structure determination of molecular cocrystals. Ph.D. thesis, University of Birmingham.

Thompson, Maria (2010) Synthesis and characterisation of d-Bi2O3 related materials stabilised by substitutions of Ca, Ga, Nb and Re. Ph.D. thesis, University of Birmingham.

Thornton, Peter James (2015) Interlocked structures based on H-bonded barbiturate complexes. Ph.D. thesis, University of Birmingham.

Tian, Jianyi (2015) Particulate emission characteristics of a light duty diesel engine under transient operation conditions. Ph.D. thesis, University of Birmingham.

Tian, Shuai (2016) CFD modelling of oscillatory perturbed advection in viscous flows. Ph.D. thesis, University of Birmingham.

Tian, Zhongbei (2017) System energy optimisation strategies for DC railway traction power networks. Ph.D. thesis, University of Birmingham.

Tijani, Ajibola Ismail (2016) High performance recycled aggregate concrete incorporating micro silica and synthetic macro fibre. Ph.D. thesis, University of Birmingham.

Tira, Hendry Sakke (2013) Impact of alternative fuels and hydrogen-enriched gaseous fuel on combustion and emissions in diesel engines. Ph.D. thesis, University of Birmingham.

Tock, Christine Louise (2016) Assessment of dough handling properties. Eng.D. thesis, University of Birmingham.

Toft, Michael (2012) The effect of crystalline morphology on the glass transition and enthalpic relaxation in poly (ether-ether-ketone). M.Res. thesis, University of Birmingham.

Tohidi, Mosleh (2015) Effect of floor-to-floor joint design on the robustness of precast concrete cross wall buildings. Ph.D. thesis, University of Birmingham.

Tomlin, Andrew Dermot (2013) Self-sensing composites: cure monitoring. M.Res. thesis, University of Birmingham.

Tomlinson, Charlie John (2013) Incorporation of urban heat in risk assessment: a health perspective. Ph.D. thesis, University of Birmingham.

Topham, Debra Ann (2012) Decentralised wireless data dissemination for vehicle-to-vehicle communications. Ph.D. thesis, University of Birmingham.

Tornielli di Crestvolant, Vittorio (2015) Investigation of advanced Butler matrices with integrated filter functions. Ph.D. thesis, University of Birmingham.

Toto, Nicola (2007) Theoretical investigations of gold nanostructures. Ph.D. thesis, University of Birmingham.

Tovee, John-Paul (2014) Microstructural influence on the effects of forward and reverse mechanical deformation in HSLA X65 and X80 linepipe steels. Ph.D. thesis, University of Birmingham.

Townsend, Timothy Duncan (2016) Extremal problems on graphs, directed graphs and hypergraphs. Ph.D. thesis, University of Birmingham.

Tran, Dung Trung (2011) Gold-containing bimetallicnanoparticles. Ph.D. thesis, University of Birmingham.

Tran, Vu Nam (2011) Optimizing model predictive control of processes for wide ranges of operating conditions. Ph.D. thesis, University of Birmingham.

Treglown, Andrew Clark (2011) Embedding problems in graphs and hypergraphs. Ph.D. thesis, University of Birmingham.

Trejo, Eduardo (2011) Centrifugal casting of an aluminium alloy. Ph.D. thesis, University of Birmingham.

Troskialina, Lina (2016) Improved performance of solid oxide fuel cell operating on biogas using tin anode-infiltration. Ph.D. thesis, University of Birmingham.

Trzcińska, Zuzanna (2014) Development of peptide sequences which are able to bind to the surface of titanium and hydroxyapatite. M.Res. thesis, University of Birmingham.

Tsai, Tsang-I (2016) Carbon formation in solid oxide fuel cells during internal reforming and anode off-gas recirculation. Ph.D. thesis, University of Birmingham.

Tsanaka, Amalia (2012) Extending network lifetime in wireless sensor networks using power-aware geographic routing. Ph.D. thesis, University of Birmingham.

Tsonev, Dragomir Mitkov (2010) Simple Lie algebras and their classification. M.Phil. thesis, University of Birmingham.

Tu, Powen (2016) Numerical and experimental study of spray characteristics in the gasoline direct injection engine. Ph.D. thesis, University of Birmingham.

Tu, Wei-Da (2010) Regime map development for co-rotating twin screw granulation. M.Phil. thesis, University of Birmingham.

Tulloch, Sam (2011) The use of dispersants in pressurised water reactor steam generators. Eng.D. thesis, University of Birmingham.

Turker, Sarah Didem (2010) Fluorescent anthracene tags for detection of base pair mismatches in DNA duplexes. M.Res. thesis, University of Birmingham.

Turnbull, Matthew (2014) Multi-spatial-mode quadrature squeezing from four-wave mixing in a hot atomic vapour. Ph.D. thesis, University of Birmingham.

Turnbull, Matthew Simon (2010) Hydrogen storage in zeolites: activation of the pore space through incorporation of guest materials. Ph.D. thesis, University of Birmingham.

Turner, Dale Michael (2010) The combustion and emissions performance of fuel blends in modern combustion systems. Ph.D. thesis, University of Birmingham.

Turner, James Anthony (2015) Application of domain decomposition methods to problems in topology optimisation. Ph.D. thesis, University of Birmingham.

Turner, Richard Paul (2010) Linear friction welding of Ti-6Al-4V: modelling and validation. Eng.D. thesis, University of Birmingham.

Tutcher, Jonathan (2016) Development of semantic data models to support data interoperability in the rail industry. Ph.D. thesis, University of Birmingham.

Twum, Stephen Boakye (2009) Multicriteria optimisation in design for reliability. Ph.D. thesis, University of Birmingham.

Tziakouris, Giannis (2017) Economics-driven approach for self-securing assets in cloud. Ph.D. thesis, University of Birmingham.

U

Ujir, Hamimah (2013) 3D facial expression classification using a statistical model of surface normals and a modular approach. Ph.D. thesis, University of Birmingham.

Umar, Abubakar Attah (2010) Design for safety framework for offshore oil and gas platforms. Ph.D. thesis, University of Birmingham.

Umiliacchi, Silvia (2016) Improving railway operations through the integration of macroscopic and microscopic modelling with optimisation. Ph.D. thesis, University of Birmingham.

Upton, Alex (2014) Investigating tumour evolution through graph theoretical analysis of gene regulatory networks. Ph.D. thesis, University of Birmingham.

Ustaoglu, Pinar (2016) Alternative splicing regulation of drosophila down syndrome cell adhesion molecule gene. Ph.D. thesis, University of Birmingham.

Utomo, Adi Tjipto (2009) Flow patterns and energy dissipation rates in batch rotor-stator mixers. Ph.D. thesis, University of Birmingham.

V

Vallatos, Antoine (2013) Magnetic resonance studies of transport and reaction in vortical flow. Ph.D. thesis, University of Birmingham.

Valls-Marquez, Monica (2009) Evaluating the capabilities of some constitutive models in reproducing the experimental behaviour of stiff clay subjected to tunnelling stress paths. Ph.D. thesis, University of Birmingham.

Vasalos, Averkios (2012) Late time response analysis in UWB radar for concealed weapon detection: feasibility study. Ph.D. thesis, University of Birmingham.

Vasta, Giuseppe (2012) Applications of perovskite oxide thin films: microcantilevers, superconducting devices and dielectric interconnections. Ph.D. thesis, University of Birmingham.

Vella, Pierre (2015) Micro and nano–manufacturing process chains: maturity assessment and bulk metallic glass enabled manufacturing routes. Ph.D. thesis, University of Birmingham.

Vella-Zarb, Liana (2009) The complementary use of theoretical structure prediction and X-ray powder diffraction data in crystal structure determination. Ph.D. thesis, University of Birmingham.

Venkataraman, Vikrant (2017) Coupling of a solid oxide fuel cell with a vapour absorption refrigeration system for refrigerated truck application. Ph.D. thesis, University of Birmingham.

Vijayakumar, Badrinarayanan (2013) Numerical modelling of heat treatment and subsequent machining of a superalloy turbine disc: an integrated manufacturing modelling approach. Eng.D. thesis, University of Birmingham.

Villa, Matteo (2016) Metallurgical and mechanical modelling of Ti-6Al-4V for welding applications. Ph.D. thesis, University of Birmingham.

Vines, Joshua Edwin (2013) Nanocarbon-hydride composites for hydrogen storage. M.Res. thesis, University of Birmingham.

Vines, Joshua Edwin (2017) The effect of carbon and silicon-based additives on the hydrogen storage properties of Lithium Borohydride. Ph.D. thesis, University of Birmingham.

Vitorino, Susana Ricardo (2011) Rhodium(III) supramolecular complexes: synthesis, DNA binding and biological studies. Ph.D. thesis, University of Birmingham.

Vivant, Bick (2012) Studies towards the total synthesis of n-methylwelwitindolinone C isothiocyanate. Ph.D. thesis, University of Birmingham.

Vizcaino Caston, Isaac (2012) Monitoring bacterial physiology during recombinant protein production using reporter gene technology. Ph.D. thesis, University of Birmingham.

Voguri, Raja Sekhar (2010) Co-crystallisation of α,ω-dicarboxylic acids with nicotinamide and isonicotinamide. M.Res. thesis, University of Birmingham.

Voraprateep, Jutharath (2013) Robustness of Wilcoxon signed-rank test against the assumption of symmetry. M.Res. thesis, University of Birmingham.

Vossoughi, Kaveh (2015) Effect of biodiesel components on selective reduction of NOx. M.Sc. by Res. thesis, University of Birmingham.

Vousden, William Dominic (2015) Electromagnetic follow-up of gravitational wave triggers and efficient parallel-tempered Markov chain Monte Carlo inference. Ph.D. thesis, University of Birmingham.

van Gemeren, Lindsey (2016) Imaging agents for mutlimodal in vivo immune cell tracking. Ph.D. thesis, University of Birmingham.

W

Wadkin-Snaith, Dominic Carl (2012) Quantum grey solitons in confining potentials. Ph.D. thesis, University of Birmingham.

Wahab, Saiful Wazlan (2014) Assessing the condition of buried pipe using ground penetrating radar. M.Phil. thesis, University of Birmingham.

Wait, Claire Fiona (2016) Clean filament winding: industrial site trials and product evaluation. Ph.D. thesis, University of Birmingham.

Wait, Claire Fiona (2011) The reuse and recycling of glass fibre waste. M.Res. thesis, University of Birmingham.

Walkiewicz, Anna Ewa (2011) Chiral expression at the nanoscale origin and recognition of chirality. Ph.D. thesis, University of Birmingham.

Walliman, Dominic Christoph (2010) Fabrication and measurement of superconducting nanowires. Ph.D. thesis, University of Birmingham.

Walsh, Anna (2015) Investigation into a thermo-sensitive chitosan/β-glycerophosphate hydrogel for ocular wound-healing. M.Res. thesis, University of Birmingham.

Walsh Atkins, Philip H. (2016) Ceramic materials for the immobilisation of high level radioactive waste. M.Sc. thesis, University of Birmingham.

Walshe, Joseph Michael (2016) Resonant scattering studies of 24Mg and 28Mg and the search for nuclear water. Ph.D. thesis, University of Birmingham.

Walters, Matthew (2016) Sulphide stress cracking test development for a weldable 13%CR supermartensitic stainless steel in simulated seabed environments. Eng.D. thesis, University of Birmingham.

Walton, Robert (2014) Indirect conversion radioisotopic battery for buried asset condition monitoring. Ph.D. thesis, University of Birmingham.

Wan Dagang, Wan Rosmiza Zana (2012) Understanding adhesion of pseudomonas fluorescens on household surfaces. Ph.D. thesis, University of Birmingham.

Wang, Anqi (2011) Bacterial biofilms and biomineralisation on titanium. Ph.D. thesis, University of Birmingham.

Wang, Chongming (2014) Combustion and emissions of a direct injection gasoline engine using biofuels. Ph.D. thesis, University of Birmingham.

Wang, Fei (2017) Austenite grain growth behaviour of HSLA steel during reheating treatment. Ph.D. thesis, University of Birmingham.

Wang, Feiliang (2015) Numerical studies of residual stress in cold formed steel sigma sections. Ph.D. thesis, University of Birmingham.

Wang, Gehao (2012) Genus zero systems for primitive groups of affine type. Ph.D. thesis, University of Birmingham.

Wang, Guanxiong (2016) Multi-level filter based on H shaped channels. Ph.D. thesis, University of Birmingham.

Wang, Hang (2012) Thermodynamic modelling of high strength, high toughness Ti alloys. Ph.D. thesis, University of Birmingham.

Wang, Haoyu (2017) Beware of warped surfaces: near-unstable cavities for future gravitational wave detectors. Ph.D. thesis, University of Birmingham.

Wang, Lirong (2014) Energy efficiency for diesel passenger trains. M.Res. thesis, University of Birmingham.

Wang, Mengyao (2013) Quantum noise reduction for gravitational wave detectors: developing realistic interferometer schemes. Ph.D. thesis, University of Birmingham.

Wang, Minlue (2014) Monitoring plan execution in partially observable stochastic worlds. Ph.D. thesis, University of Birmingham.

Wang, Minshi (2017) Microstructure characterisation and creep modelling of HP40 alloys. Ph.D. thesis, University of Birmingham.

Wang, Puyu (2016) A multi-terminal modular multilevel converter-based HVDC system with an offshore wind farm. Ph.D. thesis, University of Birmingham.

Wang, Rui (2017) Freezing and freeze-drying highly concentrated carbohydrate systems. Ph.D. thesis, University of Birmingham.

Wang, Shiyuan (2015) Fatigue crack threshold and growth behaviour in a near fully-lamellar gamma based titanium aluminides. Ph.D. thesis, University of Birmingham.

Wang, Shuo (2011) Ensemble diversity for class imbalance learning. Ph.D. thesis, University of Birmingham.

Wang, Wei (2016) Selective laser melting of al alloys: microstructure and mechanical property development. Ph.D. thesis, University of Birmingham.

Wang, Wentao (2014) NH3 exhaust gas fuel reforming tor diesel engine decarbonisation & lean NOx abatement over Silver/Alumina catalyst. Ph.D. thesis, University of Birmingham.

Wang, Xiaoxia (2010) Manifold aligned density estimation. Ph.D. thesis, University of Birmingham.

Wang, Xiqian (2017) Improving the microstructure, mechanical properties & process route in selective laser melting of nickel-superalloys. Ph.D. thesis, University of Birmingham.

Wang, Xu (2009) Tunable microwave filters using ferroelectric thin films. Ph.D. thesis, University of Birmingham.

Wang, Ye (2014) Self-assembled nanorods and nanowires from oxide functional materials grown by pulsed laser deposition. Ph.D. thesis, University of Birmingham.

Wang, Yongjing (2017) Sustainable self-healing structural composites. Ph.D. thesis, University of Birmingham.

Wang, Ziman (2015) Experimental study on diesel spray with single and multiple injection under room temperature and low temperature. Ph.D. thesis, University of Birmingham.

Want, Andrew James (2010) Physiological studies on bacterial fermentations using multi-parameter flow cytometry. Ph.D. thesis, University of Birmingham.

Ward, Andrew (2015) Development of a lead-free aluminium bearing alloy using powder metallurgy manufacturing techniques. Eng.D. thesis, University of Birmingham.

Ware, Timothy Christopher (2010) Measurement and analysis of the resolved resonance cross sections of the natural hafnium isotopes. Ph.D. thesis, University of Birmingham.

Warrack, Katrina Anne (2017) Structural studies of biofuel components. Ph.D. thesis, University of Birmingham.

Warren, James Raphael (2012) The effect of hydrogen on palladium-copper based membranes for hydrogen purification. M.Res. thesis, University of Birmingham.

Wassouf, Mohamad (2015) Bond and ductility of concrete reinforced with various steel bars surface and ductility conditions. Ph.D. thesis, University of Birmingham.

Watkins, Jonathan Stewart (2016) Density driven vortex motion in narrow channel superconductors. Ph.D. thesis, University of Birmingham.

Watson, Christopher (2015) Modelling high integrity steel forgings for turbine applications in the power generation industry. Eng.D. thesis, University of Birmingham.

Watson, Robert (2016) New numerical techniques to quantify and predict the effect of entrainment defects, applied to high pressure die casting. Ph.D. thesis, University of Birmingham.

Watton, James Peter William (2017) Performance and degradation of solid oxide cells for steam electrolysis. Ph.D. thesis, University of Birmingham.

Watts, Simon (2013) The modelling of radar sea clutter. D.Sc. thesis, University of Birmingham.

Watts, Tim (2010) Comparative effect of haemodynamic variables and rheological properties of the blood on the margination and adhesion of leukocytes and platelets. Ph.D. thesis, University of Birmingham.

Weber, Philip (2014) A framework for the analysis and comparison of process mining algorithms. Ph.D. thesis, University of Birmingham.

Webster, Rhiannon Alys (2010) Passive materials for high frequency piezocomposite ultrasonic transducers. Ph.D. thesis, University of Birmingham.

Wehbi, Mohamed (2016) Developing a novel technique to extract track stiffness information from track geometry measurement. Ph.D. thesis, University of Birmingham.

Wei, Chongfeng (2015) A finite element based approach to characterising flexible ring tire (FTire) model for extended range of operating conditions. Ph.D. thesis, University of Birmingham.

Welch, Stewart T (2010) A novel technique for the manufacture of moulds for turbine blades. Eng.D. thesis, University of Birmingham.

Weller, Sean David Tomey (2010) Lead-free Solder Technology. Eng.D. thesis, University of Birmingham.

Welsh, Noel (2011) Learning and acting in unknown and uncertain worlds. Ph.D. thesis, University of Birmingham.

Weske, Damian Franz (2013) Synthesis of rotaxanes and pseudorotaxanes as intermediates towards molecular cages. Ph.D. thesis, University of Birmingham.

West, Paul Stephen (2013) Structures of bimetallic nanoparticles and the effect of adsorption: a DFT study. Ph.D. thesis, University of Birmingham.

Whitaker, Mariana J. (2013) Synthesis and characterisation of chemically modified schafarzikite and pyrochlore minerals. Ph.D. thesis, University of Birmingham.

White, Jenifer Christine (2016) Novel functionalised, nanoarrays of DNA binding supramolecular helicates. Ph.D. thesis, University of Birmingham.

White, John (2013) CFD simulation of silica gel and water adsorbent beds used in adsorption cooling system. Ph.D. thesis, University of Birmingham.

White, Jonathan Stuart (2009) SANS investigations of the flux line lattice in unconventional superconductors. Ph.D. thesis, University of Birmingham.

Whittaker, Gemma Nicole (2014) The analysis and removal of systematic trends in stereo’s HI-1A photometry and a search for planetary transits. Ph.D. thesis, University of Birmingham.

Whittaker, Richard James (2011) An investigation into cold dwell fatigue behaviour in Ti6246 and other aerospace alloys. Eng.D. thesis, University of Birmingham.

Wilkinson, Sam K (2014) Reaction kinetics in formulated industrial catalysts. Eng.D. thesis, University of Birmingham.

Willett, Thomas Clifford (2009) Magnetic adsorbents displaying switchable ion-exchange behaviour. Ph.D. thesis, University of Birmingham.

Willetts, John (2012) Investigation into the effects of high shear blending and storage on powders for inhalation. Ph.D. thesis, University of Birmingham.

Williams, Andrew (2010) Microstructural analysis of aluminium alloy 2096 as a function of heat treatment. M.Res. thesis, University of Birmingham.

Williams, Anna Rose (2016) Biogenic precious metal-based magnetic nanocatalyst for enhanced oxygen reduction. Ph.D. thesis, University of Birmingham.

Williams, Richard Lee (2014) Development of multifunctional calcium phosphate particles for drug delivery and formation of cross-linked materials. Ph.D. thesis, University of Birmingham.

Williamson, Kenny (2015) Corrosion of CoCrMo knee implants during storage. M.Res. thesis, University of Birmingham.

Wilson, Paul James (2011) Investigating the formulation of silica-based ceramic core materials for investment casting. Eng.D. thesis, University of Birmingham.

Wilson, Robin (2016) Optimisation of the linear friction welding for Ti- 6Al-4V aero engine application. Eng.D. thesis, University of Birmingham.

Windows-Yule, Christopher R. K. (2015) Convective and segregative mechanisms in vibrofluidised granular systems. Ph.D. thesis, University of Birmingham.

Winstone, Gemma (2011) Production of catalyst supports by twin screw extrusion of pastes. Eng.D. thesis, University of Birmingham.

Wong, Tin Lok (2010) Initial segments and end-extensions of models of arithmetic. Ph.D. thesis, University of Birmingham.

Wonjo, Justyna (2012) Novel glycolipids in CD1d-mediated immunity: synthesis of new agonists of CD1d. Ph.D. thesis, University of Birmingham.

Woods, Gareth James (2009) Classical diffusion of a particle in a one dimensional random potential. Ph.D. thesis, University of Birmingham.

Worthington, Lara Angharad (2016) Investigation of compressed-sensing for acceleration of magnetic resonance spectroscopic imaging. Ph.D. thesis, University of Birmingham.

Wright, Kimberley Elizabeth (2015) Engineering of a specific binding site for protein labelling with luminescent lanthanide coated nanoparticles: a study of protein labelling and nanoparticle-peptide interactions. Ph.D. thesis, University of Birmingham.

Wu, Jing (2016) Microstructure and mechanical properties of Mg-Zn-(Y/Gd) alloys. Ph.D. thesis, University of Birmingham.

Wu, Wenwen (2010) Development and characterisation of novel low-friction wear-resistant multiplayer nanocomposite CrAlTiCN coatings. Ph.D. thesis, University of Birmingham.

Wu, Xianyue (2014) Antennas and propagation for body area networks at 60 GHZ. Ph.D. thesis, University of Birmingham.

Wu, Xue (2016) Atlas based image reconstruction for diffuse optical imaging of the human brain. Ph.D. thesis, University of Birmingham.

Wu, Yudong (2011) Simulation of graphene electronic devices. Ph.D. thesis, University of Birmingham.

Wu, Zhi (2016) Transmission expansion planning and unit commitment with large-scale integration of wind power. Ph.D. thesis, University of Birmingham.

Wu, Zhiwei (2010) Novel joining for Ti and TiAl aeroengine components. Ph.D. thesis, University of Birmingham.

Wudebwe, Uchena Nomusa Geraldine (2015) Factors influencing the development of a tissue engineered bone to bone ligament. Ph.D. thesis, University of Birmingham.

Wyre, Christopher John (2015) Recombinant protein production in Escherichia coli: optimisation of improved protocols. Ph.D. thesis, University of Birmingham.

Wyse, Richard (2014) Investigation of Zr-based amorphous alloy membranes for hydrogen purification. M.Res. thesis, University of Birmingham.

X

Xia, Fubiao (2013) Designated confirmer signatures: modelling, design and analysis. Ph.D. thesis, University of Birmingham.

Xia, Mingjun (2016) Pico- and femto-second optical pulse propagation in semiconductor optical amplifiers: analysis, optimization and quantum transmission line modelling. Ph.D. thesis, University of Birmingham.

Xia, Wenlin (2015) Diplexers and multiplexers design by using coupling matrix optimisation. Ph.D. thesis, University of Birmingham.

Xia, Zhangwen (2017) Microstructure and mechanical properties of direct laser deposited alloy IN718. Ph.D. thesis, University of Birmingham.

Xiao, Jingjing (2016) Single-target tracking of arbitrary objects using multi-layered features and contextual information. Ph.D. thesis, University of Birmingham.

Xiao, Ming (2009) Novel predistortion techniques for RF power amplifiers. Ph.D. thesis, University of Birmingham.

Xiao, Ran (2013) Fabrication and characterisation of interconnects suitable for high frequency ultrasonic array transducers. M.Res. thesis, University of Birmingham.

Xie, Mingyu (2017) Model predictive control of water quality in drinking water distribution systems considering disinfection by-products. Ph.D. thesis, University of Birmingham.

Xie, Shuang (2017) Microstructure and mechanical properties of inertia friction welded Ti-6Al-4V. Ph.D. thesis, University of Birmingham.

Xie, Yangchun (2014) An STM study of C$$_{60}$$ molecule on Au(111): close-packed single layer and magic number clusters. Ph.D. thesis, University of Birmingham.

Xie, Yiran (2016) Recycling of foundry waste materials. Ph.D. thesis, University of Birmingham.

Xin, Hua (2014) Evaluation of poly-ether-ether-ketone (PEEK) for cervical disc replacement devices. Ph.D. thesis, University of Birmingham.

Xu, Chunlei (2016) Sparsity optimization and RRSP-based theory far l-bit compressive sensing. Ph.D. thesis, University of Birmingham.

Xu, Chunyang (2015) Automatic target detection and speed estimationusing forward scatter radar sensor. Ph.D. thesis, University of Birmingham.

Xu, Weichen (2014) Synchrotron x-ray and electrochemical studies of pitting corrosion of iron. Ph.D. thesis, University of Birmingham.

Xue, Ying (2016) Modelling and control of hybrid LCC HVDC System. Ph.D. thesis, University of Birmingham.

Y

Yahya, Faridah Binti (2012) Extraction of aroma compound from Pandan leaf and use of the compound to enhance rice flavour. Ph.D. thesis, University of Birmingham.

Yang, Chao (2012) Solidification behaviour and hipping induced surface modification in Ti4522XD castings. Ph.D. thesis, University of Birmingham.

Yang, Dongxu (2016) Novel resists for next generation lithography. Ph.D. thesis, University of Birmingham.

Yang, He (2015) Progress towards the total synthesis of Herquline A and B. Ph.D. thesis, University of Birmingham.

Yang, Jian (2015) Microstructure-property development in linear friction welding of nickel-based superalloys. Ph.D. thesis, University of Birmingham.

Yang, Jiecheng (2015) DEM-CFD analysis of micromechanics for dry powder inhalers. Ph.D. thesis, University of Birmingham.

Yang, Jing (2015) Fatigue crack propagation threshold in lamellar TiAl alloys. Ph.D. thesis, University of Birmingham.

Yang, Libin (2010) Modelling of the inertia welding of Inconel 718. Ph.D. thesis, University of Birmingham.

Yang, Wen-Chi (2017) Evolution of fish schools: a theoretical study by agent-based simulation and game-theoretic analysis. Ph.D. thesis, University of Birmingham.

Yang, Xiaoguang (2011) Finite element analysis and experimental investigation of tyre characteristics for developing strain-based intelligent tyre system. Ph.D. thesis, University of Birmingham.

Yang, Xuan (2013) Distributed state estimation with the measurements of Phasor Measurement Units. Ph.D. thesis, University of Birmingham.

Yang, Zhao (2016) Biological templating methods of graphitic carbon nitride. M.Sc. thesis, University of Birmingham.

Yang, Ziyi (2015) Monitoring and predicting railway subsidence using InSAR and time series prediction techniques. Ph.D. thesis, University of Birmingham.

Yao, Conglun (2010) Strongly typed, compile-time safe and loosely coupled data persistence. Ph.D. thesis, University of Birmingham.

Yao, Shu-Nung (2015) Rendering ambisonics over headphones. Ph.D. thesis, University of Birmingham.

Yao, Yu (2012) ‘One-pot’ manufacturing process yielding low-cost magnetic supports for bioprocessing. Ph.D. thesis, University of Birmingham.

Yasmin, Rehana (2012) An efficient authentication framework for wireless sensor networks. Ph.D. thesis, University of Birmingham.

Yates, Adam (2015) The effect of microstructure on mechanical properties in inertia welded titanium 6-4. M.Res. thesis, University of Birmingham.

Yates, Francesca Jo (2010) Towards novel luminescent probes for monitoring β- galactosidase activity. Ph.D. thesis, University of Birmingham.

Ye, Ruoru (2015) Microstructure characterisation and mechanical behaviour of linear friction welded ni-based superalloys. Ph.D. thesis, University of Birmingham.

Yeh, Chun-Wei (2015) Colour morphology and its approaches. Ph.D. thesis, University of Birmingham.

Yeo, Graeme James (2017) Monitoring railway track condition using inertial sensors on an in-service vehicle. Ph.D. thesis, University of Birmingham.

Yeung, Chun L. (2011) Design and fabrication of microstructured and switchable biological surfaces. Ph.D. thesis, University of Birmingham.

Yi, Xiaodong (2014) Rapidly solidified magnesium: nickel alloys as hydrogen storage materials. Ph.D. thesis, University of Birmingham.

Yilmazer, Pinar (2013) Structural health condition monitoring of rails using acoustic emission techniques. M.Res. thesis, University of Birmingham.

Yip, Nga Chi (2016) Development and application of an oxygen electrochemical sensor. Ph.D. thesis, University of Birmingham.

Young, Jay (2016) Learning by observation using Qualitative Spatial Relations. Ph.D. thesis, University of Birmingham.

Youssef, May Mahmoud Ahmed Abdo (2016) Design and development of a medical device for treatment of proximal interphalangeal joint contracture. Ph.D. thesis, University of Birmingham.

Yu, Fei (2015) Corrosion of titanium for biomedical applications. Ph.D. thesis, University of Birmingham.

Yu, Haitao (2015) Carbon black and graphene supported Pt catalysts for IT-PEFCs. M.Res. thesis, University of Birmingham.

Yu, Jiangshan (2016) Mitigating private key compromise. Ph.D. thesis, University of Birmingham.

Yu, Shen (2013) Roll compaction of pharmaceutical excipients. Ph.D. thesis, University of Birmingham.

Yu, Suyang (2016) Dwell fatigue crack growth at elevated temperatures in an advanced nickel disc superalloy. Ph.D. thesis, University of Birmingham.

Yu, Ting Yue (2016) Optical imaging of cardiac atrial activation and repolarisation in genetically altered models. Ph.D. thesis, University of Birmingham.

Yue, Yang (2014) Modelling of the effects of entrainment defects on mechanical properties in Al-Si-Mg alloy castings. Ph.D. thesis, University of Birmingham.

Z

Zabti, Mohamed Mohamed (2012) Effects of light absorber on micro stereolithography parts. Ph.D. thesis, University of Birmingham.

Zachariades, Paschalis (2015) Development of a tube ball mill mathematical model for mill condition and safety monitoring. Ph.D. thesis, University of Birmingham.

Zafeiri, Ioanna (2017) Design and manufacture of lipid particles for emulsion stabilisation. Eng.D. thesis, University of Birmingham.

Zakaria, Nor Ayu Zalina Binti (2017) Clutter analysis and simulation in forward scatter micro radar network. Ph.D. thesis, University of Birmingham.

Zakeri, Masoud (2017) Automatic bird species identification employing an unsupervised discovery of vocalisation units. Ph.D. thesis, University of Birmingham.

Zakeri, Zohreh (2017) Optimised use of independent component analysis for EEG signal processing. Ph.D. thesis, University of Birmingham.

Zardari, Shehnila (2016) Cloud adoption: a goal-oriented requirements engineering approach. Ph.D. thesis, University of Birmingham.

Zeng, Ruilin (2013) Precipitation hardening in AZ91 magnesium alloy. Ph.D. thesis, University of Birmingham.

Zeng, Zhangfan (2013) Passive bistatic SAR with GNSS transmitter and a stationary receiver. Ph.D. thesis, University of Birmingham.

Zeraati Rezaei, Soheil (2016) Experimental investigation of a premixed compression ignition engine. Ph.D. thesis, University of Birmingham.

Zhai, Wenlei (2017) “Click-fluors”: Boronic acid-based saccharide sensors via CuAAC reaction. Ph.D. thesis, University of Birmingham.

Zhan, Yuxuan (2013) Model-based high-density functional diffuse optical tomography of human brain. Ph.D. thesis, University of Birmingham.

Zhang, Dayue (2015) Characterisation and modelling of segregation in continuously cast steel slab. Ph.D. thesis, University of Birmingham.

Zhang, Fan (2013) Spray, combustion and emission characteristics of dieseline fuel. Ph.D. thesis, University of Birmingham.

Zhang, Guowei (2017) Modelling of weldment microstructure in non-age hardening Al-based alloys. M.Phil. thesis, University of Birmingham.

Zhang, Jun (2011) Particle matter emission control and related issues for diesel engines. Ph.D. thesis, University of Birmingham.

Zhang, Kun (2010) The microstructure and properties of hipped powder Ti alloys. Ph.D. thesis, University of Birmingham.

Zhang, Mengsu (2012) Design and performance analysis of novel signature code in two-dimensional optical CDMA systems. M.Phil. thesis, University of Birmingham.

Zhang, Qinqin (2011) The microstructure and properties of powder HIPped nickel-based superalloy CM247LC. Ph.D. thesis, University of Birmingham.

Zhang, Shiling (2017) Improving the tribological and corrosion properties of Zr702 and Zircaloy-4 alloys by Ceramic Conversion Treatment. Ph.D. thesis, University of Birmingham.

Zhang, Siqi (2011) Effect of zinc substitution on the structure of calcium Fluoro-Alumino-Silicate glasses and glass-ceramics. M.Phil. thesis, University of Birmingham.

Zhang, Siqi (2017) The effect of boron substitution on the structure of calcium-aluminosilicate calcium-fluoro-aluminosilicate glasses and glass-ceramics. Ph.D. thesis, University of Birmingham.

Zhang, Xin (2010) A variable temperature scanning tunneling microscopy study of organizing C60 molecules on nanostructured gold surface. Ph.D. thesis, University of Birmingham.

Zhang, Yan (2015) Blends of cyclic poly (butylene terephthalate)/multiwalled carbon nanotube nanocomposites prepared by in situ polymerizartion. M.Res. thesis, University of Birmingham.

Zhang, Yulan (2013) Diffusion of bioactive molecules. Ph.D. thesis, University of Birmingham.

Zhang, Zhenhe (2014) Development of an FPGA system for parallel processing of railway non-destructive testing data. M.Res. thesis, University of Birmingham.

Zhang, Zhenhe (2017) Improved railway vehicle inspection and monitoring through the integration of multiple monitoring technologies. Ph.D. thesis, University of Birmingham.

Zhang, Zhibing (2016) Novel micromanipulation studies of biological and non-biological materials. D.Sc. thesis, University of Birmingham.

Zhao, Chao (2013) Synthesis and characterization of porous zinc carboxyethylphosphonates: a new class of ion-exchangeable metal-organic framework compounds. Ph.D. thesis, University of Birmingham.

Zhao, Congxiao (2014) Investigations on structural interaction of cold-formed steel roof purlin-sheet system. Ph.D. thesis, University of Birmingham.

Zhao, Ning (2013) Railway traffic flow optimisation with differing control systems. Ph.D. thesis, University of Birmingham.

Zhao, Qiancheng (2016) Printable surface hologram via nanosecond laser ablation. M.Sc. thesis, University of Birmingham.

Zhao, Xinxin (2014) Fabrication and plastic deformation of copper at small scales. Ph.D. thesis, University of Birmingham.

Zhong, Xun (2014) Design of ferrocene-peptide dimers for DNA binding and electrochemical sensing. Ph.D. thesis, University of Birmingham.

Zhou, Hansen (2014) EM sensor measurements of degradation in steels. M.Res. thesis, University of Birmingham.

Zhou, Jun (2017) Investigation of surface engineering and monitoring for reliable wind turbine gearboxes. Ph.D. thesis, University of Birmingham.

Zhou, Jun (2014) Towards the designer surface for ceramic injection moulds. M.Phil. thesis, University of Birmingham.

Zhou, Lei (2015) Non-destructive characterisation of steel microstructures using electromagnetic sensors. Ph.D. thesis, University of Birmingham.

Zhou, Suyang (2015) Design and development of energy management system for smart homes and buildings. Ph.D. thesis, University of Birmingham.

Zhu, Ju (2014) Synthesis of precious metal nanoparticles supported on bacterial biomass for catalytic applications in chemical transformations. Ph.D. thesis, University of Birmingham.

Zidouk, Amaria (2015) Recovering the optical properties of a tissue using maximum a posteriori based estimation. Ph.D. thesis, University of Birmingham.

Zito, Claudio (2016) Planning simultaneous perception and manipulation. Ph.D. thesis, University of Birmingham.

Zoualfaghari, Mohammad Hossein (2015) Co-channel interference reduction in Optical Code Division Multiple Access systems. Ph.D. thesis, University of Birmingham.

Zourna, Kalliopi (2009) Smart magnetic affinity adsorbents. Ph.D. thesis, University of Birmingham.

Zubir, Farid (2016) Direct integration of push-pull amplifier and aperture coupled antenna. Ph.D. thesis, University of Birmingham.

Zubrzycki, Pawel (2011) Fault tolerant train door control. M.Res. thesis, University of Birmingham.

Zuo, Rui (2012) Bistatic synthetic aperture radar using GNSS as transmitters of opportunity. Ph.D. thesis, University of Birmingham.

Zuo, Wenxin (2016) IBM-LBM modelling of two-phase flow in porous media. Ph.D. thesis, University of Birmingham.

This list was generated on Mon Dec 18 10:18:45 2017 GMT.