Items where Subject is "T Technology > TS Manufactures"

A

Abdallah, Ramy Mohamed Abdelnaby Metwally (2020). Electrical discharge machining (EDM) of CFRP composites. University of Birmingham. Ph.D.

Ainsworth, Mark J (2011). Metal-foam interface stability during the filling of lost foam moulds with aluminium alloys. University of Birmingham. Ph.D.

Al-Ghamdi, Khalid A. (2011). Improving the practice of experimental design in manufacturing engineering. University of Birmingham. Ph.D.

Almajri, Ahmad Khalid Boubaker (2019). Development of new micro-channels segmented regenerator for v-type alpha Stirling engine. University of Birmingham. Ph.D.

Almena-Ruiz, Alberto ORCID: 0000-0003-0497-3232 (2020). Modelling, simulation and evaluation of centralised and decentralised food manufacturing scenarios. University of Birmingham. Ph.D.

Alnaimat, Feras Adnan Mohammad (2018). Design and evaluation of an encapsulated artificial disc. University of Birmingham. Ph.D.

Alqurashi, Tawfiq (2019). Laser based manufacturing of optical diffusers. University of Birmingham. Ph.D.

Alqurashi, Yousef (2020). Photonic hydrogel sensors. University of Birmingham. Ph.D.

Ashwell, Richard Christopher (2021). Manufacturing modification through process manipulation in inertia friction welding: enhanced functionality rotary friction welding. University of Birmingham. Eng.D.

Attard, Bonnie ORCID: 0000-0002-1270-7332 (2022). Additive manufacturing of graded microstructures for aeroengine components. University of Birmingham. Ph.D.

Avila-Sierra, Alejandro (2021). Development of a nanotechnology informed clean-in-place strategy: effect of interfacial characteristics on milk fouling and cleaning mechanisms. University of Birmingham. Ph.D.

B

Bacioiu, Daniel (2019). Vision-based Monitoring System for High Quality TIG Welding. University of Birmingham. Ph.D.

Bass, Matthew Ian (2018). Steam oxidation of shot peened austenitic stainless steel. University of Birmingham. D.Eng.

Batal, Afif (2021). Laser surface texturing of biomaterials: from conceptualization to implementation. University of Birmingham. Ph.D.

C

Callaghan, Fergal James (1998). Co-digestion of agricultural and industrial wastes. University of Birmingham. Ph.D.

Carlisle, Graeme Nigel (2012). Stiffness variation in hockey sticks and the impact on stick performance. University of Birmingham. M.Phil.

Clark, Daniel (2012). Net shape engineering for high performance aerospace applications: targeted development of novel technologies for aerospace near net shape combustor module applications. University of Birmingham. Eng.D.

Cooper, Cerise Jemma (2014). Acoustics and friction of apparel and model fabrics, and consumer perceptions of fabric sounds. University of Birmingham. Ph.D.

Crichton, Trevor John (1980). The structure and properties of tinplate. University of Birmingham. Ph.D.

D

Daniel, Ritchie Lewis (2012). Combustion and emissions performance of oxygenated fuels in a modern spark ignition engine. University of Birmingham. Ph.D.

Dong, Yangchun (2011). Towards multi-functional stainless steel surface: plasma surface alloying with N, Ag and Cu. University of Birmingham. Ph.D.

Du, Jinlong (2012). Examination of the effect of tin particles and grain size on the charpy impact transition temperature in steels. University of Birmingham. M.Res.

Duan, Ranxi ORCID: 0000-0002-3401-0640 (2022). In-situ alloying based additive manufacturing of high-performance beta Ti-Mo alloys. University of Birmingham. Ph.D.

du Plessis, Andrew (2012). Low temperature plasma surface modification of stainless steels for ice sliding applications. University of Birmingham. M.Res.

F

Ford, Samantha Annabelle (2019). The visual language of virtual product design: the semiotics of colour and shape in smartphone app icons. University of Birmingham. M.A.

G

Galliker, Julia L. (2015). Middle Byzantine silk in context: integrating the textual and material evidence. University of Birmingham. Ph.D.

Ghahari, Seyed Majid (2012). In situ synchrotron x-ray characterisation and modelling of pitting corrosion of stainless steel. University of Birmingham. Ph.D.

Gill, Simaranjit Singh (2012). Controlling diesel NOx & PM emissions using fuel components and enhanced aftertreatment techniques: developing the next generation emission control system. University of Birmingham. Ph.D.

Goodwin, Oliver Howard (1912). The Birmingham hardware trade. University of Birmingham. Other

Guo, Chuan (2021). An investigation of defects in the nickel-based superalloy IN738LC fabricated by laser powder bed fusion. University of Birmingham. Ph.D.

H

Hararak, Bongkot (2020). Fibre formation, characterisation and carbonisation of bio-based precursors. University of Birmingham. Ph.D.

Harris, Luke (2011). A Study of the crystallisation kinetics in PEEK and PEEK composites. University of Birmingham. M.Res.

Harrison, Nicholas (2014). Equal channel angular pressing of elemental & alloyed P/M aluminium systems. University of Birmingham. Ph.D.

Hartono, Natalia ORCID: 0000-0003-2314-1394 (2023). Intelligent robotic disassembly optimisation for sustainability using the bees algorithm. University of Birmingham. Ph.D.

Hatefi, Arash (2013). Direct laser fabrication of Ti-5553. University of Birmingham. M.Res.

Heuer, Ernest Alexander Kristian (2009). Formulation and stability of model food foam microstructures. University of Birmingham. Eng.D.

I

Ismail, Asrul Harun ORCID: 0000-0002-6580-4654 (2021). Enhancing the bees algorithm using the traplining metaphor. University of Birmingham. Ph.D.

J

Jennings, Rachel Elizabeth (2022). Hybrid powder metallurgy processing for high temperature strength Ni-base superalloy Inconel 718. University of Birmingham. Ph.D.

Jiang, Zhu (2021). Advanced manufacture methods for form stable composite phase change materials (FSCPCMs) for thermal energy storage applications. University of Birmingham. Ph.D.

Jones, Samantha (1993). Improved sol based ceramic moulds for use in investment casting. University of Birmingham. Ph.D.

K

Khaled, Iman (2015). A study of some of the foundry processing factors influencing the quality of titanium alloy investment castings. University of Birmingham. Ph.D.

Kim, Hyeyoung (2015). Hybrid composites with natural fibres. University of Birmingham. M.Res.

Kolonko, Anna Magdalena (2012). Investigation into the mechanical performance of pipe grade HDPE with included silicon chips as a basis for future sensors. University of Birmingham. Ph.D.

L

Latorre-Noguera, Sandra Ximena (2015). Environmental and economic assessment of sustainable manufacturing processes for metal products. University of Birmingham. M.Sc.

Le, Hoang (2023). Application driven advances in laser micro-machining technology. University of Birmingham. Ph.D.

Leadley, Craig Edward (2012). Understanding the effects of high-pressure, high-temperature processing on the key quality parameters of green beans (Phaseolus vulgaris) with a view to assessing the potential quality benefits of the approach relative to conventional thermal processing. University of Birmingham. Ph.D.

Lee, Kevin (2016). Understanding shell cracking during de-wax process in investment casting. University of Birmingham. Ph.D.

Legarreta Basabe, Xabier (2018). An experimental and theoretical investigation of chocolate particle size reduction by multi-roll milling. University of Birmingham. Eng.D.

Lester, Louise Elizabeth (2009). The biomechanical analysis of the hand in rheumatoid arthritis patients with MCP arthroplasty. University of Birmingham. M.Res.

Li, Heng (2019). Ambidextrous leadership, absorptive capacity and innovation adoption: based on evidence drawn from heavy equipment manufacturing firms in China. University of Birmingham. Ph.D.

Lin, Yu-Pei (2010). Investigation of die wear by modelling the extrusion of Inconel 718. University of Birmingham. Ph.D.

Liu, Qingbin (2019). Manufacturing optimizations for micro-tubular fuel cells by extrusion and dip coating techniques. University of Birmingham. Ph.D.

Lobato, Hugo Manuael Pinto (2012). An investigation into coordinate measuring machine task specific measurement uncertainty and automated conformance assessment of airfoil leading edge profiles. University of Birmingham. Eng.D.

Loggie, Valerie Ann (2011). Soho depicted: prints, drawings and watercolours of Matthew Boulton, his manufactory and estate, 1760-1809. University of Birmingham. Ph.D.

Low, Sui Pheng (2012). Strategic development of the built environment through international construction, quality and productivity management. University of Birmingham. D.Sc.

M

Mahendran, Ramani Salmalee (2010). Characterisation of cross-linking and moisture ingress detection in an epoxy/amine resin using fibre-optic sensors. University of Birmingham. Ph.D.

Malboubi, Majid (2012). Study of gigaseal formation in patch clamping using nanotechnology. University of Birmingham. Ph.D.

Malik, Shoaib Ahmad (2011). Damage detection using self-sensing composites. University of Birmingham. Ph.D.

Mao, Jishen (2012). Characterisation of plasma arc technology processed waste products. University of Birmingham. M.Res.

Marigo, Michele (2012). Discrete element method modelling of complex granular motion in mixing vessels: evaluation and validation. University of Birmingham. Eng.D.

McCain, Stephen (2012). Characterisation of the aqueous corrosion process in NdFeB melt spun ribbon and MQI bonded magnets. University of Birmingham. Ph.D.

Melrose, Ben James (2011). The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851. University of Birmingham. M.Res.

Meng, Xing (2019). Development of an acoustic emission monitoring system for crack detection during arc welding. University of Birmingham. Ph.D.

Mills, Thomas Benjamin (2012). Development of in-vitro mouth methods for studying oral phenomena. University of Birmingham. Ph.D.

Moeini, Rana (2020). Early failure detection of insulated-gate bipolar transistor semiconductor devices for the power converters of wind turbines. University of Birmingham. Ph.D.

Moghadas Mobarakeh, Parshia (2012). Tribology of ball-and-socket total disc arthroplasty. University of Birmingham. Ph.D.

Mulhall, Rachel Ann (2013). Manufacturing change: competitiveness and adjustment through evolving production relationships. University of Birmingham. Ph.D.

N

Niknafs, Nima (2011). Mechanistic understanding of emulsion formation during processing. University of Birmingham. Ph.D.

Nobre, Farley Simon Mendes (2005). On cognitive machines in organizations. University of Birmingham. Ph.D.

O

Ojo, Samuel Olukunle (2011). Damage detection in composites using e-glass fibre and small diameter optical fibre. University of Birmingham. M.Res.

Oluwasegun, Kunle Michael (2012). Microstructural characterisation of inertia friction welded RR1000 superalloy. University of Birmingham. Ph.D.

Owliya, Mohammad (2012). Agent-based holonic job allocation in manufacturing operations. University of Birmingham. Ph.D.

P

Panjwani, Hasnain (2012). Development of a torsion balance facility and a search for temporal variations in the Newtonian gravitational constant. University of Birmingham. Ph.D.

Parwana, Sudheer Singh (2011). Surface triangulation and the downstream effects on surface flattening. University of Birmingham. Ph.D.

Phantratanamongkol, Supanan (2020). Price dynamics, profit potential, and cannibalisation effect of remanufactured smartphones: Empirical analysis using eBay data. University of Birmingham. Ph.D.

Pichot, Roman (2012). Stability and characterisation of emulsions in the presence of colloidal particles and surfactants. University of Birmingham. Ph.D.

Pillinger, Ian (1984). The prediction of metal flow and properties in three-dimensional forgings using the finite element period. University of Birmingham. Ph.D.

Pooladvand, Hojat (2018). Lead-free pyroelectric materials for environmentally friendly solid-state cooling systems. University of Birmingham. Ph.D.

Porter, Matthew Thomas ORCID: 0000-0002-9227-4185 (2020). High-temperature ceramic matrix composites prepared via microwave energy enhanced chemical vapour infiltration. University of Birmingham. Ph.D.

Potoczny, Grzegorz A. (2012). Electro-mechanical behaviour of indium tin oxide coated polymer substrates for flexible electronics. University of Birmingham. Ph.D.

Q

Qu, Mo (2023). Application of reinforcement learning in robotic disassembly operations. University of Birmingham. Ph.D.

R

Rattanakit, Rattanachai (2013). Optimisation of the aluminium compressor impeller machining process. University of Birmingham. Eng.D.

Ren, Juan (2012). An investigation of using micromachined silicon diaphragms in high temperature pressure sensors. University of Birmingham. Ph.D.

Reynolds, Phillip John (2012). A Surlyn® ionomer as a self-healing and self-sensing composite. University of Birmingham. M.Res.

Rezk, Ahmed Rezk Masoud (2012). Theoretical and experimental investigation of silica gel / water adsorption refrigeration systems. University of Birmingham. Ph.D.

Richards, W.A. (1972). The Birmingham gun manufactory of Farmer and Galton and the slave trade in the eighteenth century. University of Birmingham. M.A.

Roberts, William Michael (2012). The synthesis and characterisation of lead-free piezoelectric ceramics. University of Birmingham. M.Res.

Ronayne, Megan Gwyneth (2016). Manufacturing textile futures: adaptation, competitiveness and the evolution of UK technical textile firms. University of Birmingham. Ph.D.

Rossiter, James (2011). Multimodal intent recognition for natural human-robotic interaction. University of Birmingham. Ph.D.

Rungthonkit, Prathan (2012). Structural behaviour of structural insulated panels (SIPS). University of Birmingham. Ph.D.

S

Saad, Nor Hayati (2010). Modelling and performance evaluation of coupled micro resonator array for artificial nose. University of Birmingham. Ph.D.

Saedon, Juri Bin (2012). Micromilling of hardened (62 HRC) AISI D2 cold work tool steel. University of Birmingham. Ph.D.

Sato, Atsushi (2012). Nickel-based single crystal superalloys for industrial gas turbines. University of Birmingham. Ph.D.

Sergi, Alessandro (2022). Hot isostatic pressing of high temperature materials. University of Birmingham. Ph.D.

Shyha, Islam Saad Elsayed Mohamed (2010). Drilling of carbon fibre reinforced plastic composites. University of Birmingham. Ph.D.

Siggs, Eirian Bethany (2010). Laser and electron beam treatments for corrosion protection of friction stir welds in aerospace alloys. University of Birmingham. Eng.D.

Simpson, George Innes (2012). An investigation into thin film palladium alloy composite membranes with a powdered tungsten intermediate layer for the separation of hydrogen. University of Birmingham. M.Res.

Slater, Carl (2012). The static and dynamic behaviour of carbon fibre composites used in golf club shafts. University of Birmingham. Ph.D.

Sorrell, Jessica (2011). Characterisation of Silsesquioxane-Poly(Methyl Methacrylate) blends. University of Birmingham. M.Res.

Sprittles, James Edward (2010). Dynamic wetting/dewetting processes in complex liquid-solid systems. University of Birmingham. Ph.D.

Stewart, Edward James Charles (2012). A distributed instrumentation system for the acquisition of rich, multi-dimensional datasets from railway vehicles. University of Birmingham. Ph.D.

Swain, Luke James (2017). Modelling ceramic mould deformation in the investment casting process. University of Birmingham. Eng.D.

T

Tey, Joo Guan Martin (2003). A generic model of organisational change towards world class manufacturing. University of Birmingham. Ph.D.

Tolipov, Abror (2019). Multi-point forming utilising novel elastic cushion designs. University of Birmingham. Ph.D.

Tomlin, Andrew Dermot (2013). Self-sensing composites: cure monitoring. University of Birmingham. M.Res.

Truong, Linh (2017). Institutional governance tensions within global value chains: the study of the Vietnam textile and garment industry. University of Birmingham. Ph.D.

W

Wait, Claire Fiona (2011). The reuse and recycling of glass fibre waste. University of Birmingham. M.Res.

Watson, Christopher (2015). Modelling high integrity steel forgings for turbine applications in the power generation industry. University of Birmingham. Eng.D.

Welch, Stewart T (2010). A novel technique for the manufacture of moulds for turbine blades. University of Birmingham. Eng.D.

Wilson, Paul James (2011). Investigating the formulation of silica-based ceramic core materials for investment casting. University of Birmingham. Eng.D.

Wood, Thomas A. (2019). An experimental study in the wetting of porous powders. University of Birmingham. Eng.D.

Wu, Wenwen (2010). Development and characterisation of novel low-friction wear-resistant multiplayer nanocomposite CrAlTiCN coatings. University of Birmingham. Ph.D.

Y

Yang, Jian (2015). Microstructure-property development in linear friction welding of nickel-based superalloys. University of Birmingham. Ph.D.

Yang, Xiaoguang (2011). Finite element analysis and experimental investigation of tyre characteristics for developing strain-based intelligent tyre system. University of Birmingham. Ph.D.

Yeung, Chun L. (2011). Design and fabrication of microstructured and switchable biological surfaces. University of Birmingham. Ph.D.

Z

Zabti, Mohamed Mohamed (2012). Effects of light absorber on micro stereolithography parts. University of Birmingham. Ph.D.

Zhang, Zebang (2022). Robot manipulation planning for complex structures. University of Birmingham. Ph.D.

Zheng, Senjing (2022). Automatic identification of mechanical parts for robotic disassembly using deep neural network techniques. University of Birmingham. Ph.D.

Zhou, Nan (2020). Microstructure-property development and defect characterization of Al-X friction welds for automotive applications. University of Birmingham. Ph.D.

Zhuo, Bingyu (2020). Flowability and storage stability of highly active powder surfactant systems. University of Birmingham. Ph.D.