Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Author | Year of Award
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Y | Z
Number of items at this level: 286.

A

Abdallah, Ramy Mohamed Abdelnaby Metwally (2020). Electrical discharge machining (EDM) of CFRP composites. University of Birmingham. Ph.D.

Abdorahimi, Danial (2018). Comparison of radio frequency path loss models in soil for wireless underground sensor networks. University of Birmingham. M.Phil.

Abdullah, Che Zulkhairi (2013). Parametric sweep search for parallel robot workspace determination. University of Birmingham. Ph.D.

Abdullah, Nik Rosli (2011). Effects of split injection and exhaust gas recirculation strategies on combustion and emissions characteristics in a modern V6 diesel engine. University of Birmingham. Ph.D.

Abdullahi, Bala (2015). Development and optimization of heat pipe based compound parabolic collector. University of Birmingham. Ph.D.

Abena, Alessandro (2018). Advanced modelling for the orthogonal cutting of unidirectional carbon fibre reinforced plastic composites. University of Birmingham. Ph.D.

Abosaf, Mohamed (2018). Finite element modelling of multi-point forming. University of Birmingham. Ph.D.

Ahmad, Abdalqader Y. H. (2018). Investigation of cryogenic energy storage for air conditioning applications. University of Birmingham. Ph.D.

Ahmadinejad, Mehrdad (2016). Modelling soot oxidation in DPF and modelling of PGM loading effect in a DOC. University of Birmingham. Ph.D.

Al Jubori, Ayad Mahmoud Salman (2017). Development and optimization of efficient small-scale turbines for organic rankine cycle powered by low-temperature heat sources. University of Birmingham. Ph.D.

Al Lafi, Abdul Ghaffar (2009). Cross linked sulphonated poly (ether ether ketone) for the development of polymer electrolyte membrane fuel cell. University of Birmingham. Ph.D.

Al Lawati, Malallah Mohamed Malallah (2022). Hot isostatic pressing of titanium metal matrix composites for tribological applications. University of Birmingham. Ph.D.

Al Qahtani, Yasser (2017). Particulate matter characterization and control in premixed compression ignition engines. University of Birmingham. Ph.D.

Al-Ayfari, Hadi H. K. (1986). Experimental measurement and mathematical modelling of meteorogical parameters for solar energy applications. University of Birmingham. Ph.D.

Al-Ghamdi, Khalid A. (2011). Improving the practice of experimental design in manufacturing engineering. University of Birmingham. Ph.D.

Al-Mousawi, Fadhel (2018). Adsorption system for cooling and power generation using advanced adsorbent materials. University of Birmingham. Ph.D.

Al-Shohani, Wisam A. M. (2018). Development and performance of concentrated optical water filter for photovoltaic applications. University of Birmingham. Ph.D.

Alammar, Ahmed Ali Ghulfus (2018). Enhancing thermal performance of heat pipe based solar thermal collector. University of Birmingham. Ph.D.

Alamri, Yassir Ali S (2022). Development of high concentrating photovoltaic/ thermal system. University of Birmingham. Ph.D.

Albaik, Ibrahim A. A. ORCID: 0000-0003-0280-7214 (2022). Numerical and experimental development of an efficient adsorption desalination and cooling system. University of Birmingham. Ph.D.

Aldhufairi, Hamad Sarhan Dheyab Hamad ORCID: 0000-0002-9687-4604 (2019). Multi-chamber tyre design and analysis for low rolling resistance. University of Birmingham. Ph.D.

Aldihani, Adel (2017). Enhancing the performance of PV system in dusty environment. University of Birmingham. Ph.D.

Aldossary, Abdulrahman S. (2017). Development and performance characterisation of high concentrating multi-junction PV/Thermal technology. University of Birmingham. Ph.D.

Alfarawi, Suliman Salim (2017). Modelling and optimization of High Temperature Difference (HTD) gamma-type Stirling engine prototype. University of Birmingham. Ph.D.

Algareu, Abdulmaged Omer (2017). Development of reflective low concentrated photovoltaic/ thermal system. University of Birmingham. Ph.D.

Aliazizi, Fereshteh (2017). Forearm cooling for intention tremor in multiple sclerosis. University of Birmingham. M.Phil.

Almutairi, Ghzzai (2013). Ageing of integrated-planar Solid Oxide Fuel Cells. University of Birmingham. Ph.D.

Alnaimat, Feras Adnan Mohammad (2018). Design and evaluation of an encapsulated artificial disc. University of Birmingham. Ph.D.

Alqahtani, Ali Mubark (2017). Computational studies of homogeneous charge compression ignition, spark ignition and opposed piston single cylinder engines. University of Birmingham. Ph.D.

Alqattan, Bader Ahmad (2019). Holographic laser ablation for nanopatterning. University of Birmingham. Ph.D.

Alqurashi, Tawfiq (2019). Laser based manufacturing of optical diffusers. University of Birmingham. Ph.D.

Alqurashi, Yousef (2020). Photonic hydrogel sensors. University of Birmingham. Ph.D.

Amakiri, Eridei Lucky (2021). Coupling of solid oxide fuel cell exhaust with vapour absorption refrigeration system for refrigerated truck application: Modelling and experimental investigation. University of Birmingham. Ph.D.

Arabi, Samaneh (2016). Virtual vibration testing of body and power unit mounted components (diesel engine EGR coolant rail). University of Birmingham. Ph.D.

Ashwell, Richard Christopher (2021). Manufacturing modification through process manipulation in inertia friction welding: enhanced functionality rotary friction welding. University of Birmingham. Eng.D.

B

Badawy, Tawfik (2018). Impact of injector deposits and spark plug gap on engine performance and emissions. University of Birmingham. Ph.D.

Bahari, Muhammad Syahril (2019). Enhancement of bees algorithm for global optimisation. University of Birmingham. Ph.D.

Bahr Ennil, Ali (2017). Optimization of small-scale axial turbine for distributed compressed air energy storage system. University of Birmingham. Ph.D.

Bakhshi-Jooybari, Mohammad (1995). Development of an Intelligent Knowledge Based System (IKBS) for forging die design. University of Birmingham. Ph.D.

Barry, Nathan (2008). Lead-free solders for high-reliability applications: high-cycle fatigue studies. University of Birmingham. Eng.D.

Bhaduri, Debajyoti (2014). Ultrasonic assisted creep feed grinding and dressing of advanced aerospace alloys. University of Birmingham. Ph.D.

Binbakir, Turki (2021). Enhancing the Bees algorithm for global optimisation using search space manipulation. University of Birmingham. Ph.D.

Bogarra-Macias, Maria del Carmen (2017). Characterisation of particulate matter emitted by gasoline direct injection engines and its impact on environment catalysts. University of Birmingham. Ph.D.

Buckley, John Richard (2004). A study of heterogeneous nucleation and electrostatic charge in steam flows. University of Birmingham. Ph.D.

Buratin, Stefano (2018). Pulsed laser ablation of silicon: the influence of beam parameters on ablated crater morphology. University of Birmingham. Ph.D.

Burton, Hanna Elisabeth (2018). Characterisation of coronary arteries: mechanical testing and three-dimensional imaging. University of Birmingham. Ph.D.

C

Cao, Siyang (2016). Flexible bond wire capacitive strain sensor for a vehicle tyre. University of Birmingham. Ph.D.

Carlisle, Graeme Nigel (2012). Stiffness variation in hockey sticks and the impact on stick performance. University of Birmingham. M.Phil.

Carter, Luke Nelson (2013). Selective laser melting of nickel superalloys for high temperature applications. University of Birmingham. Ph.D.

Cash, Scott ORCID: 0000-0002-3905-2065 (2019). Intelligent traction motor control techniques for hybrid and electric vehicles. University of Birmingham. Ph.D.

Cashman, Miriam (2015). Alternative cut-off and surface finishing of investment castings. University of Birmingham. M.Sc.

Chan, Jun Hoe (2020). Impact of low carbon fuel and catalyst on gasoline direct injection engine particulate matter. University of Birmingham. Ph.D.

Chang, Wei-Chin (2002). An improved method of investigation of combustion parameters in a natural gas fuelled SI engine with EGR and H2 as additives. University of Birmingham. Ph.D.

Che Zainal Abidin, Nik Mohd Farid (2018). Hybridisation of bees algorithm for continuous optimisation. University of Birmingham. Ph.D.

Cheneler, David (2010). The Design and Analysis of a Micro Squeeze Flow Rheometer. University of Birmingham. Ph.D.

Ching, Heng Wei (2011). Airflow testing of aero-engine components. University of Birmingham. M.Phil.

Chitsaz Charandabi, Sahand (2014). Development of a Lorentz force drive system for a torsional paddle microresonator using Focused Ion Beam machining. University of Birmingham. Ph.D.

Chong, Jun Jie (2013). The application of thermal, catalytic and non-thermal plasma oxidation processes to enhance NO-NO\(_2\)oxidation in the engine exhaust and improve DPF regeneration at lower temperatures. University of Birmingham. Ph.D.

Clift, Sally Elizabeth (1986). Identification of defect locations in forged products using the finite-element method. University of Birmingham. Ph.D.

Contreras Vásquez, Luis Felipe (2018). Mechanical synthesis of magnesium alloys for hydrogen storage. University of Birmingham. Ph.D.

Coratella, Carlo (2021). Experimental investigation of the non-uniformity of jets’ velocities exiting a multi-hole injector. University of Birmingham. Ph.D.

Cosentino, Francesco (2013). Heat treatment of nickel based superalloys for turbine blade application: modelling and validation. University of Birmingham. Ph.D.

Crolla, Joseph Patrick (2023). Replicating the intrinsic biomechanical characteristics of connective tissue: An exploration into the design and manufacture of PVA cryogel. University of Birmingham. Ph.D.

Cruz De Oliveira, Diana Marta ORCID: 0000-0002-8151-1333 (2022). Combined numerical and morphological study of the heart: development of a scalable mitral valve morphometric model and assessment of modelling criteria for the right atrium. University of Birmingham. Ph.D.

Culver, Robert Alan (2017). Collective strong coupling of cold potassium atoms in an optical ring cavity. University of Birmingham. Ph.D.

Curtis, David Thomas (2011). Point grinding and electrolytic point grinding of Udimet 720. University of Birmingham. Ph.D.

D

Daabo, Ahmed Mahmood Abdullah (2018). Stress analysis and aerodynamic optimization of small-scale compressed air turbines. University of Birmingham. Ph.D.

Dakkama, Hassan Jawdat Fadhiel (2017). Experimental investigation of MOF adsorption system for ice making, freeze water desalination and cooling applications. University of Birmingham. Ph.D.

Daus, Friedrich Herbert (2010). Process, microstructure and property relationships in dissimilar nickel base superalloy inertia friction welds. University of Birmingham. Ph.D.

Della Roverys Coseglio, Mario Sergio (2018). Susceptibility of low-temperature plasma nitrided 17-4 PH (H1150D) to sulphide stress cracking (SSC) in typical oilfield environment. University of Birmingham. Ph.D.

Dharmadhikari, Aawishkar (2020). Particulate matter emissions characteristics, dynamics and control in compression ignitions engines. University of Birmingham. Ph.D.

Dooley, Gavin (2017). Shell improvements for the investment casting of orthopaedic implants. University of Birmingham. Ph.D.

Doustdar, Omid ORCID: 0000-0003-3301-4970 (2019). Alternative fuels and aftertreatment systems for low emissions engines. University of Birmingham. Ph.D.

Duan, Huayu ORCID: 0000-0003-1525-2481 (2023). The application of active control in railway pantographs. University of Birmingham. Ph.D.

Duan, Ranxi ORCID: 0000-0002-3401-0640 (2022). In-situ alloying based additive manufacturing of high-performance beta Ti-Mo alloys. University of Birmingham. Ph.D.

Dzidek, Brygida Maria (2018). Tribological interactions of the finger pad and tactile displays. University of Birmingham. Ph.D.

E

Eckold, David Geoffrey (2016). Spinal implants - the problems of debris. University of Birmingham. Ph.D.

El-Hofy, Mohamed Hassan (2014). Milling/routing of carbon fibre reinforced plastic (CFRP) composites. University of Birmingham. Ph.D.

Eldbib, Khaled (2016). Design and analysis of rule induction systems. University of Birmingham. Ph.D.

Elghawail, Ali Mohamed (2018). Flexible forming of 3-D metal panels. University of Birmingham. Ph.D.

Elsayed, Ahmed Mohamed (2011). Heat transfer in helically coiled small diameter tubes for miniature cooling systems. University of Birmingham. Ph.D.

Embaye, Mebrahtu (2016). Enhancement of panel radiator based hydronic central heating system using flow pulsation. University of Birmingham. Ph.D.

Erbiyik, Hikmet (1982). Production of two-part components by powder forging. University of Birmingham. M.Sc.

Esgandari, Mohammad (2015). Simulation methods for vehicle disc brake noise, vibration & harshness. University of Birmingham. Ph.D.

Eslami, Farshad (2013). Properties, performance and emissions of biofuels in blends with gasoline. University of Birmingham. Ph.D.

Essa, Khamis (2011). Finite element prediction of deformation mechanics in incremental forming processes. University of Birmingham. Ph.D.

F

Faizi, Koohyar (2020). Numerical and experimental investigation of novel foundation systems for offshore wind turbines. University of Birmingham. Ph.D.

Faraji-Rad, Zahra (2016). Microneedles Fabrication for Subcutaneous Fluid Sampling and Drug Delivery. University of Birmingham. Ph.D.

Fennell, Daniel Alexander (2014). Exhaust gas fuel reforming for improved gasoline direct injection engine efficiency and emissions. University of Birmingham. Ph.D.

Firth, James Jonathan (2022). Mechanochemical finishing: developing a mechanical finishing process to form tribologically superior surfaces. University of Birmingham. Ph.D.

Fisher, Matthew (2001). Point-based mathematics for computer-aided manufacture. University of Birmingham. Ph.D.

Fotoohi, Babak (2011). A study of mechanochemical activation in solid-state synthesis of advanced ceramic composites. University of Birmingham. M.Phil.

Freear, Nicholas David (2002). Automated visual inspection for the quality control of pad printing. University of Birmingham. Ph.D.

G

García Girón, Antonio (2020). Laser-based surface functionalisation: advances in durability and 3D processing. University of Birmingham. Ph.D.

Ghosh, Siddharth (2012). Investigation of techniques for the surface roughness characterisation of bovine articular cartilage. University of Birmingham. M.Phil.

Gill, Simaranjit Singh (2012). Controlling diesel NOx & PM emissions using fuel components and enhanced aftertreatment techniques: developing the next generation emission control system. University of Birmingham. Ph.D.

González Álvarez, Alba (2018). Design and development of dynamic orthopaedic implants to improve surgical treatment of the spine. University of Birmingham. Ph.D.

Green, Naomi Charlotte (2017). Evaluation of ceramics as a material for Total Disc Replacements. University of Birmingham. Ph.D.

Guo, Yina (2013). Microstructure and texture characterisation of linear friction welding of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo. University of Birmingham. Ph.D.

Guo, Yu (2010). A coupled DEM/CFD analysis of die filling process. University of Birmingham. Ph.D.

H

Hamedi, Mohammadreza (2016). Advanced thermal management of diesel aftertreatment systems. University of Birmingham. Ph.D.

Harris, Christopher William (2019). Investigating the functionalisation of poly-ether-ether-ketone surfaces through the application of surface texturing for friction and wear control within all polymeric joint prosthesis. University of Birmingham. Ph.D.

Hasan, Ahmad Omar (2011). Influence of prototype three way catalytic converter on regulated and unregulated emissions from gasoline HCCI/SI engine. University of Birmingham. Ph.D.

Hassanin, Hany Salama Sayed Ali (2011). Fabrication of ceramic and ceramic composite microcomponents using soft lithography. University of Birmingham. Ph.D.

He, Yinglong ORCID: 0000-0002-6666-8471 (2021). Developing and Evaluating the driving and powertrain systems of automated and electrified vehicles (AEVs) for sustainable transport. University of Birmingham. Ph.D.

Hergueta Santos-Olmo, Cruz (2018). Modern fuels and catalytic technologies for low emissions in gasoline direct injection engines. University of Birmingham. Ph.D.

Hewett, John M. (2018). Corrosion film solubility and suspended particle behaviour of corroding SS316L surfaces in simulated nuclear plant coolant. University of Birmingham. Ph.D.

Hood, Richard (2010). The machinability of a gamma titanium aluminide intermetallic. University of Birmingham. Ph.D.

Hoskins, Thomas James (2015). The mechanical and tribological properties of PEEK gears. University of Birmingham. Ph.D.

Hu, Zhen Hua Sampson (2012). Antennas with frequency domain control for future communication systems. University of Birmingham. Ph.D.

Hussain, Bilaal Yusef (2018). Dynamic simulations of carbon dioxide pipeline transportation for the purpose of carbon capture and storage. University of Birmingham. Eng.D.

Hussein, Eman (2018). Numerical and experimental evaluation of advanced metal-organic framework materials for adsorption heat pumps. University of Birmingham. Ph.D.

I

Ismail, Asrul Harun ORCID: 0000-0002-6580-4654 (2021). Enhancing the bees algorithm using the traplining metaphor. University of Birmingham. Ph.D.

J

Jabbary-Aslani, Farnaz (2011). Design attributes of spinal fusion cages and a surgical instrument to aid thier screw fixation. University of Birmingham. Ph.D.

Jayakody, Harith Eranga (2019). Cryogenic energy for indirect freeze desalination – numerical and experimental investigation. University of Birmingham. Ph.D.

Ji, Ran (2013). Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools. University of Birmingham. Ph.D.

Jiang, Kyle (2016). Advanced micro and nano fabrications for engineering applications. University of Birmingham. D.Sc.

Jiang, Tianchu (2022). Ansys-based air-bearing models and air-bearing systems for turbomachinery. University of Birmingham. Ph.D.

Jiang, Xiaogeng (2015). Characterising geometric errors in rotary axes of 5-axis machine tools. University of Birmingham. Ph.D.

Jiang, Zhuangde (2011). Fabrication and nanoroughness characterization of specific nanostructures and nanodevice. University of Birmingham. Ph.D.

Jones, Martin Richard (1992). Feasibility studies of the exhaust-gas reforming of hydrocarbon and alcohol fuels. University of Birmingham. Ph.D.

Jules, Désiré Guiovanni (2016). An agent-based approach to intelligent manufacturing network configuration. University of Birmingham. Ph.D.

Jwad, Tahseen (2018). Laser-induced surface modifications for optical applications. University of Birmingham. Ph.D.

K

Kakoullis, Yiannis Polly (1979). Slipper lubrication in axial piston pumps. University of Birmingham. Ph.D.

Kamaruddin, Shafie (2018). Improved versions of the bees algorithm for global optimisation. University of Birmingham. Ph.D.

Kamsani, Silah Hayati (2016). Improvements on the bees algorithm for continuous optimisation problems. University of Birmingham. Ph.D.

KarimNejadAliabadi, Parya (2017). Development of thermoelectric cooling system for tissue ablation. University of Birmingham. Ph.D.

Kavanagh, Alan (2017). Study of improved casting methods for the manufacture of medical grade cobalt alloy. University of Birmingham. Ph.D.

Kerin, Mairi Elaine ORCID: 0000-0002-8303-3443 (2022). Industry 4.0: product digital twins for remanufacturing decision-making. University of Birmingham. Ph.D.

Khalid, Muhammad (2019). Nanofabrication via laser interference lithography and integration of various optical systems for remote sensing applications. University of Birmingham. Ph.D.

Khalil, Khalil Mohammed (2018). Development and optimization of small-scale axial turbines for distributed cryogenic energy storage system. University of Birmingham. Ph.D.

Khan, Sarmad Ali (2014). Machining of nickel based superalloys using coated PCBN tooling. University of Birmingham. Ph.D.

Kokosis, Georgios (2019). Development of plastic design procedures for stainless steel indeterminate structures. University of Birmingham. Ph.D.

Kooanantkul, Chuta (2020). Investigation of the validity of using 3D printed teeth to replace human teeth for in-vitro endodontic research. University of Birmingham. M.Sc.

Kubba, Ali Essam Salih (2013). Wireless tyre condition monitoring system self-powered by means of energy harvesting. University of Birmingham. Ph.D.

Kubiak, Alicja Joanna (2018). Design and evaluation of devices for the treatment of intervertebral disorders. University of Birmingham. Ph.D.

L

Lan, Feiying ORCID: 0000-0002-8916-3134 (2023). Dense RGB-D SLAM and object localisation for robotics and industrial applications. University of Birmingham. Ph.D.

Lattimore, Thomas (2016). Combustion and emissions of a direct injection gasoline engine using EGR. University of Birmingham. Ph.D.

Lau, Chia Sheng (2012). Biogas upgrade through exhaust gas reforming process for use in CI engines. University of Birmingham. Ph.D.

Lavecchia, Carolina Eleonora (2018). Combined numerical and morphological study of the lumbar spine: parametric finite element model and evaluation of dynamic implants. University of Birmingham. Ph.D.

Lawless, Bernard Michael (2019). Biostability of an orthopaedic device and its long-term implantable biomaterials. University of Birmingham. Ph.D.

Le, Hoang (2023). Application driven advances in laser micro-machining technology. University of Birmingham. Ph.D.

Lechner, Raphael Balthasar (2020). Modelling of the combustion parameters of biogenous fuel gases to predict stable combustion conditions in multifuel systems. University of Birmingham. Ph.D.

Lefort, Isaline (2015). Thermally efficient advanced diesel exhaust aftertreatment for cleaner vehicles. University of Birmingham. Ph.D.

Lester, Louise Elizabeth (2009). The biomechanical analysis of the hand in rheumatoid arthritis patients with MCP arthroplasty. University of Birmingham. M.Res.

Li, Haiying (2013). CFD modelling study of sprays and combustion of gasoline and DMF in direct injection gasoline engines. University of Birmingham. Ph.D.

Li, Huan (2010). Damage and repair evolution of cold formed linepipe steel. University of Birmingham. Ph.D.

Li, Ji (2021). Driver-oriented intelligent control methodology for series-parallel hybrid electric vehicles. University of Birmingham. Ph.D.

Li, Maojun (2015). Drilling of carbon fibre reinforced plastic (CFRP) and metal matrix composites (MMC). University of Birmingham. Ph.D.

Li, Nan (2013). A novel approach to supplier selection and order allocation in SMEs manufacturing networks. University of Birmingham. M.Phil.

Li, Runzhao ORCID: 0000-0001-5120-9849 (2021). Artificial intelligence and chemical kinetics enabled property-oriented fuel design for internal combustion engine. University of Birmingham. Ph.D.

Li, Weining ORCID: 0000-0002-8844-564X (2022). Heat-assisted incremental sheet forming of TI-6AL-4V sheets. University of Birmingham. Ph.D.

Li, Yanfei (2012). Experimental study on spray and combustion characteristics of diesel-like fuels. University of Birmingham. Ph.D.

Li, Ziyang ORCID: 0000-0001-6052-9246 (2019). Online dynamic optimisation for the engine management system using artificial intelligence methods. University of Birmingham. Ph.D.

Liu, Dai (2015). Combustion and emissions of an automotive diesel engine using biodiesel fuels under steady and start conditions. University of Birmingham. Ph.D.

Liu, Jian (2014). Fabrication of composite materials with addition of graphene platelets. University of Birmingham. Ph.D.

Lockyer, Peter Stephen (2007). Controlling the interpolation of NURBS curves and surfaces. University of Birmingham. Ph.D.

Lu, Yongmin (2013). Microstructural characterisation of a high strength Nickel-based superalloy. University of Birmingham. Ph.D.

Luan, Tianshi (2017). Development of a remote optically actuated and interrogated passive sensor with micro corner cube reflector structure. University of Birmingham. Ph.D.

Luszcz, Pawel (2009). Combustion diagnostics in Homogeneous Charge Compression Ignition optical and thermal single cylinder engines. University of Birmingham. Ph.D.

M

Ma, He (2013). Control oriented engine modelling and engine multi-objective optimal feedback control. University of Birmingham. Ph.D.

Mahmood, Humaira (2020). Bio-mechanical behaviour of articular cartilage: characterisation of surface damage, friction and replacement. University of Birmingham. Ph.D.

Mahmoodi, Nasim (2017). Design and development of MEMS biosensors. University of Birmingham. Ph.D.

Mahmoudi, Hamid (2015). Performance of cobalt-based eggshell catalyst in low-temperature Fischer-Tropsch synthesis process to produce long-chain hydrocarbons from synthesis gas utilizing fixed-bed reactor technology. University of Birmingham. Ph.D.

Mahomed, Aziza (2009). Properties of elastomers for small-joint replacements. University of Birmingham. Ph.D.

Maksabi, Mersedeh (2014). Integration of a mechanical interlocking lever frame into a signaling demonstrator. University of Birmingham. M.Res.

Malboubi, Majid (2012). Study of gigaseal formation in patch clamping using nanotechnology. University of Birmingham. Ph.D.

Malik, Shoaib Ahmad (2011). Damage detection using self-sensing composites. University of Birmingham. Ph.D.

Mamat, Rizalman (2010). Performance and emission characteristics of an automotive diesel engine using biodiesel fuel with the influence of air intake variables. University of Birmingham. Ph.D.

Mardani, Moloud (2023). Exhaust thermochemical recovery in low carbon vehicles via catalytic reforming of renewable fuels. University of Birmingham. Ph.D.

Marigo, Michele (2012). Discrete element method modelling of complex granular motion in mixing vessels: evaluation and validation. University of Birmingham. Eng.D.

Mavrakis, Nikolaos ORCID: 0000-0002-3138-2633 (2020). Estimation of objects’ inertial parameters, and their usage in robot grasping and manipulation. University of Birmingham. Ph.D.

Medina Aguirre, Fernanda Del Rosario (2022). Point grinding of hardened steel (62 HRC) and a silica based ceramic for aerospace applications. University of Birmingham. Ph.D.

Mehmeti, Aldi (2022). Hybird manufacturing of high value metallic components through combination of additive manufacturing and conventional processes. University of Birmingham. Ph.D.

Mei, Yuanzhuo (2021). Experimental and simulation investigation of the gasoline engine aftertreatment system. University of Birmingham. Ph.D.

Melrose, Ben James (2011). The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851. University of Birmingham. M.Res.

Meng, Xing (2019). Development of an acoustic emission monitoring system for crack detection during arc welding. University of Birmingham. Ph.D.

Michalek, Aleksandra ORCID: 0000-0001-7057-7671 (2022). Laser induced periodic surfaces structures: advances in modelling, processing and monitoring. University of Birmingham. Ph.D.

Mohammadkhani, Ali (2013). Modified colloidal lithography: a flexible tool for fabrication of periodic nanostructures. University of Birmingham. Ph.D.

Molokanov, Aleksej (2017). Design of the high-strength gear steels for use in advanced power transmission for low-emission aero-engines. University of Birmingham. Ph.D.

Morison, Christopher Neil (2002). The dynamics of shaken baby syndrome. University of Birmingham. Ph.D.

Mosli, Izazi Aqilah (2015). Investigation into the effect of mesh size on adsorber bed pressure drop performance for solar powered air conditioning system. University of Birmingham. M.Res.

Muhammad, Haseena Bashir (2012). Development of a bio-inspired MEMS based tactile sensor array for an artificial finger. University of Birmingham. Ph.D.

Munoz, Raul E. (2015). Finite element modelling (including material grain refinement prediction) when turning advanced aerospace alloys. University of Birmingham. Ph.D.

Murad, Noor Asniza (2011). Micromachined millimeter wave circuits. University of Birmingham. Ph.D.

N

Naghashian, Mohammad Hossein (2015). Generalised cost benefit analysis for large infrastructure projects: the case of the channel tunnel rail link. University of Birmingham. Ph.D.

Naik, Jay Prakash (2014). Nanowires fabricated by Focused Ion Beam. University of Birmingham. Ph.D.

Nasrollahi, Vahid ORCID: 0000-0002-5697-8062 (2020). Drilling of micro-scale high aspect ratio holes with ultra-short lasers. University of Birmingham. Ph.D.

Niazi, Ayda (2016). Real time measurement of oxygen by integrating a clark sensor with low cost printed circuit board technology and solid electrolyte membrane. University of Birmingham. Ph.D.

Norouzi, Shahrouz (2014). Interaction of diesel type fuels and engine fuel system components in compression ignition engines. University of Birmingham. Ph.D.

O

Odili, Daniel Ifesinachi (2011). Simulation and microwave measurement of the conductivity of carbon nanotubes. University of Birmingham. Ph.D.

Ogunoiki, Adebola Oluwaseyi (2015). Artificial road input data generation tool for vehicle durability assessment using artificial intelligence. University of Birmingham. Ph.D.

Ojo, Samuel Olukunle (2017). Effect of surface treatment and recycling on the mechanical properties of e-glass. University of Birmingham. Ph.D.

Olorunlambe, Khadijat Abiola (2022). Acoustic emissions: diagnosing tribological phenomenon in artificial joint materials. University of Birmingham. Ph.D.

Ortenzi, Valerio (2017). Vision-based trajectory control of unsensored robots to increase functionality, without robot hardware modication. University of Birmingham. Ph.D.

Ostadi-Valiabad, Hossein (2012). Micro and nano scale three-dimensional reconstruction of polymer electrolyte fuel cell porous layers. University of Birmingham. Ph.D.

Owen, David Gwyn ORCID: 0000-0002-7774-6084 (2022). Multiphase cardiovascular haemodynamics: impact of surface roughness and platelet activation. University of Birmingham. Ph.D.

P

Pakle, Sagar ORCID: 0000-0002-3737-0959 (2020). Design of low inertia and high performance radial compressor and turbine for high-speed turbomachinery. University of Birmingham. Ph.D.

Pan, Meng (2010). Using multiple layers and surface roughness control for improving the sensitivity of SRP sensors. University of Birmingham. M.Phil.

Pandya, Bhargav ORCID: 0000-0001-7967-1277 (2023). Integration of a Solid Oxide Fuel Cell system with a heat driven refrigeration system for refrigerated transportation application. University of Birmingham. Ph.D.

Parekh, Jugal (2012). Minimally invasive approach for surgical treatment of proximal femur fractures. University of Birmingham. Ph.D.

Parisouz, Shahriar (2018). Experimental rubber friction modelling and its applications in tyre finite element analysis. University of Birmingham. Ph.D.

Parry, Lewis ORCID: 0000-0003-4926-7876 (2020). Engine combustion and emission performance of furan fuels in comparison to conventional automotive fuels. University of Birmingham. Ph.D.

Parsa, Soran ORCID: 0000-0002-7182-0001 (2021). Intelligent planning for robotic disassembly. University of Birmingham. Ph.D.

Parwana, Sudheer Singh (2011). Surface triangulation and the downstream effects on surface flattening. University of Birmingham. Ph.D.

Patel, Purvi Shantilal (2010). Screw fixation of implants to the spine. University of Birmingham. Ph.D.

Penchev, Pavel Nedyalkov (2016). Reconfigurable laser micro-processing systems: development of generic system-level tools for implementing modular laser micro-manufactoring platforms. University of Birmingham. Ph.D.

Piaszyk, Jakub (2012). Animal fat (tallow) as fuel for stationary internal combustion engines. University of Birmingham. Ph.D.

Pretorius, Cornelius Johannes (2013). Machining of titanium alloys with ultra-hard cutting tool materials. University of Birmingham. Ph.D.

Pu, Guang (2017). Hybrid air bearings for high speed turbo machinery. University of Birmingham. Ph.D.

Pylios, Theodoros (2010). A new metacarpophalangeal joint replacement arthroplasty. University of Birmingham. Ph.D.

Q

Qu, Mo (2023). Application of reinforcement learning in robotic disassembly operations. University of Birmingham. Ph.D.

R

Rahbar, Kiyarash (2016). Development and optimization of small-scale radial inflow turbine for waste heat recovery with organic rankine cycle. University of Birmingham. Ph.D.

Ramsay, Joshua (2021). The interaction of applied stress and oxidation and their combined influence on the fatigue crack initiation behaviour of CG RR1000. University of Birmingham. Ph.D.

Rastegarpanah, Alireza (2016). A methodology for the Lower Limb Robotic Rehabilitation system. University of Birmingham. Ph.D.

Reed, Daniel Thomas (2010). An investigation into the synthesis and characterisation of metal borohydrides for hydrogen storage. University of Birmingham. Ph.D.

Rezk, Ahmed Rezk Masoud (2012). Theoretical and experimental investigation of silica gel / water adsorption refrigeration systems. University of Birmingham. Ph.D.

Rodríguez Sanmartín, Daniel (2011). Smart piezoelectric devices for X-ray optics applications. University of Birmingham. Ph.D.

Romano, Jean-Michel ORCID: 0000-0001-6264-9815 (2019). Laser-based manufacturing routes for functionalizing surfaces. University of Birmingham. Ph.D.

Roshanmanesh, Sanaz (2019). Methods and tools for optimisation of operational reliability and condition monitoring of large-scale industrial wind and tidal turbines. University of Birmingham. Ph.D.

Rossiter, James (2011). Multimodal intent recognition for natural human-robotic interaction. University of Birmingham. Ph.D.

Routledge, David Philip (2013). Joining of NiTi-based shape memory alloys to Ti-6Al-4V. University of Birmingham. Eng.D.

S

Sabouri, Aydin (2015). Nanofabrication by means of focused ion beam. University of Birmingham. Ph.D.

Sadak, Ferhat (2021). Vision guided automation for intra-cytoplasmic sperm injection. University of Birmingham. Ph.D.

Sadeghioon, Ali Mollazadeh (2015). Design and development of wireless underground sensor networks for pipeline monitoring. University of Birmingham. Ph.D.

Sadiq, Ghada Abbas (2018). Development of compressed air rotary wankel devices for hybrid vehicle. University of Birmingham. Ph.D.

Saedon, Juri Bin (2012). Micromilling of hardened (62 HRC) AISI D2 cold work tool steel. University of Birmingham. Ph.D.

Saeidlou, Salman (2019). A unified semantic web-enabled framework for intelligent manufacturing supply chain. University of Birmingham. Ph.D.

Saleh, Majdi Massoud Idris (2021). Metal organic framework material adsorption system for cooling, desalination and heat storage applications. University of Birmingham. Ph.D.

Scone, Thomas H (2023). Design and Modelling of a Magnetic Fluid Based Artificial Muscle for Gait Rehabilitation. University of Birmingham. Ph.D.

Sergi, Alessandro (2022). Hot isostatic pressing of high temperature materials. University of Birmingham. Ph.D.

Shenker, Joshua (2015). The compatibility of semi-synthetic engine oil with conventional diesel and biodiesel fuels. University of Birmingham. Ph.D.

Shi, Baosheng (2015). Development of an MOF based adsorption air conditioning system for automotive application. University of Birmingham. Ph.D.

Shokrollahihassanbarough, Farzad (2019). Modelling of high efficiency multi-fuel two-stroke gas engine systems. University of Birmingham. Ph.D.

Shuai, Bin (2022). Real-time energy management of the hybrid off-highway vehicle using reinforcement learning. University of Birmingham. Ph.D.

Shukur, Zainab (2021). The Tribological Properties of PEEK Machine Elements. University of Birmingham. Ph.D.

Shyha, Islam Saad Elsayed Mohamed (2010). Drilling of carbon fibre reinforced plastic composites. University of Birmingham. Ph.D.

Simms, Henry George (2011). Oxidation behaviour of Austenitic stainless steels at high temperature in supercritical plant. University of Birmingham. M.Res.

Sindwani, A.D. (1970). Forced vibrations during grinding and their effect on surface quality. University of Birmingham. M.Sc.

Sitshebo, Simbarashe Wilson Timothy (2011). HC-SCR of NO\(_x\) emissions over Ag-AL\(_2\)O\(_3\) catalysts using diesel fuel as a reductant. University of Birmingham. Ph.D.

Sittichompoo, Sak ORCID: 0000-0003-1472-7078 (2022). Hydrogen carriers fuel reforming for on-board hydrogen production with heat recovery. University of Birmingham. Ph.D.

Stead, Iestyn M N ORCID: 0000-0003-0573-1761 (2021). Cold, green and clean: reduction of parasitic losses in zero emission cryogenic expanders. University of Birmingham. Ph.D.

Sunmola, Funlade Tajudeen (2013). Optimising learning with transferable prior information. University of Birmingham. Ph.D.

Surowiec, Agata (2011). Strategic change in the UK railway network through reorganization and major projects. University of Birmingham. M.Phil.

T

Tahhan Antar, Mohammad (2011). Minimum damage wire electrical discharge machining of aerospace alloys. University of Birmingham. Ph.D.

Tan, Cheng (2015). Model based control for a modern automotive diesel engine. University of Birmingham. Ph.D.

Tian, Jianyi (2015). Particulate emission characteristics of a light duty diesel engine under transient operation conditions. University of Birmingham. Ph.D.

Tira, Hendry Sakke (2013). Impact of alternative fuels and hydrogen-enriched gaseous fuel on combustion and emissions in diesel engines. University of Birmingham. Ph.D.

Tolipov, Abror (2019). Multi-point forming utilising novel elastic cushion designs. University of Birmingham. Ph.D.

Tozer, Gavin ORCID: 0000-0003-0248-1015 (2020). Development of a static shaft Wankel expander for small-scale applications. University of Birmingham. Ph.D.

Tu, Powen (2016). Numerical and experimental study of spray characteristics in the gasoline direct injection engine. University of Birmingham. Ph.D.

Turner, Dale Michael (2010). The combustion and emissions performance of fuel blends in modern combustion systems. University of Birmingham. Ph.D.

Twum, Stephen Boakye (2009). Multicriteria optimisation in design for reliability. University of Birmingham. Ph.D.

V

Vasta, Giuseppe (2012). Applications of perovskite oxide thin films: microcantilevers, superconducting devices and dielectric interconnections. University of Birmingham. Ph.D.

Vecchi, Andrea ORCID: 0000-0002-4961-9643 (2023). Thermo-mechanical energy storage applications for energy system decarbonisation. University of Birmingham. Ph.D.

Vella, Pierre (2015). Micro and nano–manufacturing process chains: maturity assessment and bulk metallic glass enabled manufacturing routes. University of Birmingham. Ph.D.

Vossoughi, Kaveh (2015). Effect of biodiesel components on selective reduction of NOx. University of Birmingham. M.Sc.

W

Wahbi, Ammar (2022). Methane-gasoline dual fuel engine combustion and emissions control technologies. University of Birmingham. Ph.D.

Wait, Claire Fiona (2011). The reuse and recycling of glass fibre waste. University of Birmingham. M.Res.

Walton, Robert (2014). Indirect conversion radioisotopic battery for buried asset condition monitoring. University of Birmingham. Ph.D.

Wang, Chongming (2014). Combustion and emissions of a direct injection gasoline engine using biofuels. University of Birmingham. Ph.D.

Wang, Guanxiong (2016). Multi-level filter based on H shaped channels. University of Birmingham. Ph.D.

Wang, Wentao (2014). NH3 exhaust gas fuel reforming tor diesel engine decarbonisation & lean NOx abatement over Silver/Alumina catalyst. University of Birmingham. Ph.D.

Wang, Yongjing (2017). Sustainable self-healing structural composites. University of Birmingham. Ph.D.

Wang, Ziman (2015). Experimental study on diesel spray with single and multiple injection under room temperature and low temperature. University of Birmingham. Ph.D.

Wei, Chongfeng (2015). A finite element based approach to characterising flexible ring tire (FTire) model for extended range of operating conditions. University of Birmingham. Ph.D.

White, John (2013). CFD simulation of silica gel and water adsorbent beds used in adsorption cooling system. University of Birmingham. Ph.D.

Wong, Seck Hoe (2004). Interactions of micromachines and the fluid environment: rapid mixing in micromixers. University of Birmingham. Ph.D.

Wright, Edmund Harvey (1961). Analysis of unsteady gas flow in a plain pipe exhaust system of a firing engine and its side effect upon the performance of a naturally aspirated two-stroke oil engine. University of Birmingham. Ph.D.

X

Xia, Zhangwen (2017). Microstructure and mechanical properties of direct laser deposited alloy IN718. University of Birmingham. Ph.D.

Xin, Hua (2014). Evaluation of poly-ether-ether-ketone (PEEK) for cervical disc replacement devices. University of Birmingham. Ph.D.

Y

Yang, Yang (2018). The effect of nanoforces on the attachment of cells. University of Birmingham. Ph.D.

Yates, Adam (2015). The effect of microstructure on mechanical properties in inertia welded titanium 6-4. University of Birmingham. M.Res.

Youssef, May Mahmoud Ahmed Abdo (2016). Design and development of a medical device for treatment of proximal interphalangeal joint contracture. University of Birmingham. Ph.D.

Youssef, Peter George Asaad (2018). Experimental and numerical investigation of a new MOF based adsorption water desalination system. University of Birmingham. Ph.D.

Yu, Yunluo (2020). Biomimetic and optimal designs of grooved aerodynamic thrust bearings for increased load capacity. University of Birmingham. Ph.D.

Z

Zabti, Mohamed Mohamed (2012). Effects of light absorber on micro stereolithography parts. University of Birmingham. Ph.D.

Zeraati Rezaei, Soheil (2016). Experimental investigation of a premixed compression ignition engine. University of Birmingham. Ph.D.

Zhang, Siqi (2017). The effect of boron substitution on the structure of calcium-aluminosilicate calcium-fluoro-aluminosilicate glasses and glass-ceramics. University of Birmingham. Ph.D.

Zhang, Yunfan (2018). Optimization and control of a dual-loop EGR system in a modern diesel engine. University of Birmingham. Ph.D.

Zhang, Zebang (2022). Robot manipulation planning for complex structures. University of Birmingham. Ph.D.

Zhang, Zhihua (2023). Development of automatic micromanipulation measurement system to analyse the mechanical strength of micro-sized materials. University of Birmingham. Ph.D.

Zhao, Qiancheng (2016). Printable surface hologram via nanosecond laser ablation. University of Birmingham. M.Sc.

Zheng, Senjing (2022). Automatic identification of mechanical parts for robotic disassembly using deep neural network techniques. University of Birmingham. Ph.D.

Zhou, Jun (2017). Investigation of surface engineering and monitoring for reliable wind turbine gearboxes. University of Birmingham. Ph.D.

Zhou, Quan ORCID: 0000-0003-4216-3468 (2019). Design optimisation and real-time energy management control of the electrified off-highway vehicle with artificial intelligence. University of Birmingham. Ph.D.

This list was generated on Mon Mar 18 04:32:35 2024 GMT.