eTheses Repository

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

 Up a level
 Export as ASCII CitationBibTeXDublin CoreEP3 XMLEndNoteHTML CitationJSONMETSOAI-ORE Resource Map (Atom Format)OAI-ORE Resource Map (RDF Format)Object IDsOpenURL ContextObjectRDF+N-TriplesRDF+N3RDF+XMLRefWorksReferReference Manager
Group by: Author | Year of Award
Jump to: 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2004 | 2002 | 2001 | 1992 | 1986
Number of items at this level: 128.

2016

Cao, Siyang (2016) Flexible bond wire capacitive strain sensor for a vehicle tyre. Ph.D. thesis, University of Birmingham.

Jules, Désiré Guiovanni (2016) An agent-based approach to intelligent manufacturing network configuration. Ph.D. thesis, University of Birmingham.

Lattimore, Thomas (2016) Combustion and emissions of a direct injection gasoline engine using EGR. Ph.D. thesis, University of Birmingham.

Rahbar, Kiyarash (2016) Development and optimization of small-scale radial inflow turbine for waste heat recovery with organic rankine cycle. Ph.D. thesis, University of Birmingham.

Tu, Powen (2016) Numerical and experimental study of spray characteristics in the gasoline direct injection engine. Ph.D. thesis, University of Birmingham.

Youssef, May Mahmoud Ahmed Abdo (2016) Design and development of a medical device for treatment of proximal interphalangeal joint contracture. Ph.D. thesis, University of Birmingham.

2015

Abdullahi, Bala (2015) Development and optimization of heat pipe based compound parabolic collector. Ph.D. thesis, University of Birmingham.

Cashman, Miriam (2015) Alternative cut-off and surface finishing of investment castings. M.Sc. thesis, University of Birmingham.

Esgandari, Mohammad (2015) Simulation methods for vehicle disc brake noise, vibration & harshness. Ph.D. thesis, University of Birmingham.

Hoskins, Thomas James (2015) The mechanical and tribological properties of PEEK gears. Ph.D. thesis, University of Birmingham.

Jiang, Xiaogeng (2015) Characterising geometric errors in rotary axes of 5-axis machine tools. Ph.D. thesis, University of Birmingham.

Lefort, Isaline (2015) Thermally efficient advanced diesel exhaust aftertreatment for cleaner vehicles. Ph.D. thesis, University of Birmingham.

Li, Maojun (2015) Drilling of carbon fibre reinforced plastic (CFRP) and metal matrix composites (MMC). Ph.D. thesis, University of Birmingham.

Liu, Dai (2015) Combustion and emissions of an automotive diesel engine using biodiesel fuels under steady and start conditions. Ph.D. thesis, University of Birmingham.

Mahmoudi, Hamid (2015) Performance of cobalt-based eggshell catalyst in low-temperature Fischer-Tropsch synthesis process to produce long-chain hydrocarbons from synthesis gas utilizing fixed-bed reactor technology. Ph.D. thesis, University of Birmingham.

Mosli, Izazi Aqilah (2015) Investigation into the effect of mesh size on adsorber bed pressure drop performance for solar powered air conditioning system. M.Res. thesis, University of Birmingham.

Munoz, Raul E. (2015) Finite element modelling (including material grain refinement prediction) when turning advanced aerospace alloys. Ph.D. thesis, University of Birmingham.

Naghashian, Mohammad Hossein (2015) Generalised cost benefit analysis for large infrastructure projects: the case of the channel tunnel rail link. Ph.D. thesis, University of Birmingham.

Ogunoiki, Adebola Oluwaseyi (2015) Artificial road input data generation tool for vehicle durability assessment using artificial intelligence. Ph.D. thesis, University of Birmingham.

Sabouri, Aydin (2015) Nanofabrication by means of focused ion beam. Ph.D. thesis, University of Birmingham.

Sadeghioon, Ali Mollazadeh (2015) Design and development of wireless underground sensor networks for pipeline monitoring. Ph.D. thesis, University of Birmingham.

Shenker, Joshua (2015) The compatibility of semi-synthetic engine oil with conventional diesel and biodiesel fuels. Ph.D. thesis, University of Birmingham.

Shi, Baosheng (2015) Development of an MOF based adsorption air conditioning system for automotive application. Ph.D. thesis, University of Birmingham.

Tan, Cheng (2015) Model based control for a modern automotive diesel engine. Ph.D. thesis, University of Birmingham.

Tian, Jianyi (2015) Particulate emission characteristics of a light duty diesel engine under transient operation conditions. Ph.D. thesis, University of Birmingham.

Vella, Pierre (2015) Micro and nano–manufacturing process chains: maturity assessment and bulk metallic glass enabled manufacturing routes. Ph.D. thesis, University of Birmingham.

Vossoughi, Kaveh (2015) Effect of biodiesel components on selective reduction of NOx. M.Sc. by Res. thesis, University of Birmingham.

Wang, Ziman (2015) Experimental study on diesel spray with single and multiple injection under room temperature and low temperature. Ph.D. thesis, University of Birmingham.

Wei, Chongfeng (2015) A finite element based approach to characterising flexible ring tire (FTire) model for extended range of operating conditions. Ph.D. thesis, University of Birmingham.

Yates, Adam (2015) The effect of microstructure on mechanical properties in inertia welded titanium 6-4. M.Res. thesis, University of Birmingham.

2014

Bhaduri, Debajyoti (2014) Ultrasonic assisted creep feed grinding and dressing of advanced aerospace alloys. Ph.D. thesis, University of Birmingham.

Chitsaz Charandabi, Sahand (2014) Development of a Lorentz force drive system for a torsional paddle microresonator using Focused Ion Beam machining. Ph.D. thesis, University of Birmingham.

El-Hofy, Mohamed Hassan (2014) Milling/routing of carbon fibre reinforced plastic (CFRP) composites. Ph.D. thesis, University of Birmingham.

Fennell, Daniel Alexander (2014) Exhaust gas fuel reforming for improved gasoline direct injection engine efficiency and emissions. Ph.D. thesis, University of Birmingham.

Khan, Sarmad Ali (2014) Machining of nickel based superalloys using coated PCBN tooling. Ph.D. thesis, University of Birmingham.

Liu, Jian (2014) Fabrication of composite materials with addition of graphene platelets. Ph.D. thesis, University of Birmingham.

Maksabi, Mersedeh (2014) Integration of a mechanical interlocking lever frame into a signaling demonstrator. M.Res. thesis, University of Birmingham.

Naik, Jay Prakash (2014) Nanowires fabricated by Focused Ion Beam. Ph.D. thesis, University of Birmingham.

Norouzi, Shahrouz (2014) Interaction of diesel type fuels and engine fuel system components in compression ignition engines. Ph.D. thesis, University of Birmingham.

Walton, Robert (2014) Indirect conversion radioisotopic battery for buried asset condition monitoring. Ph.D. thesis, University of Birmingham.

Wang, Chongming (2014) Combustion and emissions of a direct injection gasoline engine using biofuels. Ph.D. thesis, University of Birmingham.

Wang, Wentao (2014) NH3 exhaust gas fuel reforming tor diesel engine decarbonisation & lean NOx abatement over Silver/Alumina catalyst. Ph.D. thesis, University of Birmingham.

Xin, Hua (2014) Evaluation of poly-ether-ether-ketone (PEEK) for cervical disc replacement devices. Ph.D. thesis, University of Birmingham.

2013

Abdullah, Che Zulkhairi (2013) Parametric sweep search for parallel robot workspace determination. Ph.D. thesis, University of Birmingham.

Almutairi, Ghzzai (2013) Ageing of integrated-planar Solid Oxide Fuel Cells. Ph.D. thesis, University of Birmingham.

Carter, Luke Nelson (2013) Selective laser melting of nickel superalloys for high temperature applications. Ph.D. thesis, University of Birmingham.

Chong, Jun Jie (2013) The application of thermal, catalytic and non-thermal plasma oxidation processes to enhance NO-NO$$_2$$oxidation in the engine exhaust and improve DPF regeneration at lower temperatures. Ph.D. thesis, University of Birmingham.

Cosentino, Francesco (2013) Heat treatment of nickel based superalloys for turbine blade application: modelling and validation. Ph.D. thesis, University of Birmingham.

Eslami, Farshad (2013) Properties, performance and emissions of biofuels in blends with gasoline. Ph.D. thesis, University of Birmingham.

Guo, Yina (2013) Microstructure and texture characterisation of linear friction welding of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo. Ph.D. thesis, University of Birmingham.

Ji, Ran (2013) Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools. Ph.D. thesis, University of Birmingham.

Kubba, Ali Essam Salih (2013) Wireless tyre condition monitoring system self-powered by means of energy harvesting. Ph.D. thesis, University of Birmingham.

Li, Haiying (2013) CFD modelling study of sprays and combustion of gasoline and DMF in direct injection gasoline engines. Ph.D. thesis, University of Birmingham.

Li, Nan (2013) A novel approach to supplier selection and order allocation in SMEs manufacturing networks. M.Phil. thesis, University of Birmingham.

Lu, Yongmin (2013) Microstructural characterisation of a high strength Nickel-based superalloy. Ph.D. thesis, University of Birmingham.

Ma, He (2013) Control oriented engine modelling and engine multi-objective optimal feedback control. Ph.D. thesis, University of Birmingham.

Mohammadkhani, Ali (2013) Modified colloidal lithography: a flexible tool for fabrication of periodic nanostructures. Ph.D. thesis, University of Birmingham.

Pretorius, Cornelius Johannes (2013) Machining of titanium alloys with ultra-hard cutting tool materials. Ph.D. thesis, University of Birmingham.

Routledge, David Philip (2013) Joining of NiTi-based shape memory alloys to Ti-6Al-4V. Eng.D. thesis, University of Birmingham.

Sunmola, Funlade Tajudeen (2013) Optimising learning with transferable prior information. Ph.D. thesis, University of Birmingham.

Tira, Hendry Sakke (2013) Impact of alternative fuels and hydrogen-enriched gaseous fuel on combustion and emissions in diesel engines. Ph.D. thesis, University of Birmingham.

White, John (2013) CFD simulation of silica gel and water adsorbent beds used in adsorption cooling system. Ph.D. thesis, University of Birmingham.

2012

Carlisle, Graeme Nigel (2012) Stiffness variation in hockey sticks and the impact on stick performance. M.Phil. thesis, University of Birmingham.

Ghosh, Siddharth (2012) Investigation of techniques for the surface roughness characterisation of bovine articular cartilage. M.Phil. thesis, University of Birmingham.

Gill, Simaranjit Singh (2012) Controlling diesel NOx & PM emissions using fuel components and enhanced aftertreatment techniques: developing the next generation emission control system. Ph.D. thesis, University of Birmingham.

Hu, Zhen Hua Sampson (2012) Antennas with frequency domain control for future communication systems. Ph.D. thesis, University of Birmingham.

Lau, Chia Sheng (2012) Biogas upgrade through exhaust gas reforming process for use in CI engines. Ph.D. thesis, University of Birmingham.

Li, Yanfei (2012) Experimental study on spray and combustion characteristics of diesel-like fuels. Ph.D. thesis, University of Birmingham.

Malboubi, Majid (2012) Study of gigaseal formation in patch clamping using nanotechnology. Ph.D. thesis, University of Birmingham.

Marigo, Michele (2012) Discrete element method modelling of complex granular motion in mixing vessels: evaluation and validation. Eng.D. thesis, University of Birmingham.

Muhammad, Haseena Bashir (2012) Development of a bio-inspired MEMS based tactile sensor array for an artificial finger. Ph.D. thesis, University of Birmingham.

Ostadi-Valiabad, Hossein (2012) Micro and nano scale three-dimensional reconstruction of polymer electrolyte fuel cell porous layers. Ph.D. thesis, University of Birmingham.

Parekh, Jugal (2012) Minimally invasive approach for surgical treatment of proximal femur fractures. Ph.D. thesis, University of Birmingham.

Piaszyk, Jakub (2012) Animal fat (tallow) as fuel for stationary internal combustion engines. Ph.D. thesis, University of Birmingham.

Rezk, Ahmed Rezk Masoud (2012) Theoretical and experimental investigation of silica gel / water adsorption refrigeration systems. Ph.D. thesis, University of Birmingham.

Saedon, Juri Bin (2012) Micromilling of hardened (62 HRC) AISI D2 cold work tool steel. Ph.D. thesis, University of Birmingham.

Vasta, Giuseppe (2012) Applications of perovskite oxide thin films: microcantilevers, superconducting devices and dielectric interconnections. Ph.D. thesis, University of Birmingham.

Zabti, Mohamed Mohamed (2012) Effects of light absorber on micro stereolithography parts. Ph.D. thesis, University of Birmingham.

2011

Abdullah, Nik Rosli (2011) Effects of split injection and exhaust gas recirculation strategies on combustion and emissions characteristics in a modern V6 diesel engine. Ph.D. thesis, University of Birmingham.

Al-Ghamdi, Khalid A. (2011) Improving the practice of experimental design in manufacturing engineering. Ph.D. thesis, University of Birmingham.

Ching, Heng Wei (2011) Airflow testing of aero-engine components. M.Phil. thesis, University of Birmingham.

Curtis, David Thomas (2011) Point grinding and electrolytic point grinding of Udimet 720. Ph.D. thesis, University of Birmingham.

Elsayed, Ahmed Mohamed (2011) Heat transfer in helically coiled small diameter tubes for miniature cooling systems. Ph.D. thesis, University of Birmingham.

Essa, Khamis Essa Ali (2011) Finite element prediction of deformation mechanics in incremental forming processes. Ph.D. thesis, University of Birmingham.

Fotoohi, Babak (2011) A study of mechanochemical activation in solid-state synthesis of advanced ceramic composites. M.Phil. thesis, University of Birmingham.

Hasan, Ahmad Omar (2011) Influence of prototype three way catalytic converter on regulated and unregulated emissions from gasoline HCCI/SI engine. Ph.D. thesis, University of Birmingham.

Hassanin, Hany Salama Sayed Ali (2011) Fabrication of ceramic and ceramic composite microcomponents using soft lithography. Ph.D. thesis, University of Birmingham.

Jabbary-Aslani, Farnaz (2011) Design attributes of spinal fusion cages and a surgical instrument to aid thier screw fixation. Ph.D. thesis, University of Birmingham.

Jiang, Zhuangde (2011) Fabrication and nanoroughness characterization of specific nanostructures and nanodevice. Ph.D. thesis, University of Birmingham.

Malik, Shoaib Ahmad (2011) Damage detection using self-sensing composites. Ph.D. thesis, University of Birmingham.

Melrose, Ben James (2011) The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851. M.Res. thesis, University of Birmingham.

Murad, Noor Asniza (2011) Micromachined millimeter wave circuits. Ph.D. thesis, University of Birmingham.

Odili, Daniel Ifesinachi (2011) Simulation and microwave measurement of the conductivity of carbon nanotubes. Ph.D. thesis, University of Birmingham.

Parwana, Sudheer Singh (2011) Surface triangulation and the downstream effects on surface flattening. Ph.D. thesis, University of Birmingham.

Rodríguez Sanmartín, Daniel (2011) Smart piezoelectric devices for X-ray optics applications. Ph.D. thesis, University of Birmingham.

Rossiter, James (2011) Multimodal intent recognition for natural human-robotic interaction. Ph.D. thesis, University of Birmingham.

Simms, Henry George (2011) Oxidation behaviour of Austenitic stainless steels at high temperature in supercritical plant. M.Res. thesis, University of Birmingham.

Sitshebo, Simbarashe Wilson Timothy (2011) HC-SCR of NO$$_x$$ emissions over Ag-AL$$_2$$O$$_3$$ catalysts using diesel fuel as a reductant. Ph.D. thesis, University of Birmingham.

Surowiec, Agata (2011) Strategic change in the UK railway network through reorganization and major projects. M.Phil. thesis, University of Birmingham.

Tahhan Antar, Mohammad (2011) Minimum damage wire electrical discharge machining of aerospace alloys. Ph.D. thesis, University of Birmingham.

Wait, Claire Fiona (2011) The reuse and recycling of glass fibre waste. M.Res. thesis, University of Birmingham.

2010

Cheneler, David (2010) The Design and Analysis of a Micro Squeeze Flow Rheometer. Ph.D. thesis, University of Birmingham.

Daus, Friedrich Herbert (2010) Process, microstructure and property relationships in dissimilar nickel base superalloy inertia friction welds. Ph.D. thesis, University of Birmingham.

Guo, Yu (2010) A coupled DEM/CFD analysis of die filling process. Ph.D. thesis, University of Birmingham.

Hood, Richard (2010) The machinability of a gamma titanium aluminide intermetallic. Ph.D. thesis, University of Birmingham.

Li, Huan (2010) Damage and repair evolution of cold formed linepipe steel. Ph.D. thesis, University of Birmingham.

Mamat, Rizalman (2010) Performance and emission characteristics of an automotive diesel engine using biodiesel fuel with the influence of air intake variables. Ph.D. thesis, University of Birmingham.

Pan, Meng (2010) Using multiple layers and surface roughness control for improving the sensitivity of SRP sensors. M.Phil. thesis, University of Birmingham.

Patel, Purvi Shantilal (2010) Screw fixation of implants to the spine. Ph.D. thesis, University of Birmingham.

Pylios, Theodoros (2010) A new metacarpophalangeal joint replacement arthroplasty. Ph.D. thesis, University of Birmingham.

Reed, Daniel Thomas (2010) An investigation into the synthesis and characterisation of metal borohydrides for hydrogen storage. Ph.D. thesis, University of Birmingham.

Shyha, Islam Saad Elsayed Mohamed (2010) Drilling of carbon fibre reinforced plastic composites. Ph.D. thesis, University of Birmingham.

Turner, Dale Michael (2010) The combustion and emissions performance of fuel blends in modern combustion systems. Ph.D. thesis, University of Birmingham.

2009

Al Lafi, Abdul Ghaffar (2009) Cross linked sulphonated poly (ether ether ketone) for the development of polymer electrolyte membrane fuel cell. Ph.D. thesis, University of Birmingham.

Lester, Louise Elizabeth (2009) The biomechanical analysis of the hand in rheumatoid arthritis patients with MCP arthroplasty. M.Res. thesis, University of Birmingham.

Luszcz, Pawel (2009) Combustion diagnostics in Homogeneous Charge Compression Ignition optical and thermal single cylinder engines. Ph.D. thesis, University of Birmingham.

Mahomed, Aziza (2009) Properties of elastomers for small-joint replacements. Ph.D. thesis, University of Birmingham.

Twum, Stephen Boakye (2009) Multicriteria optimisation in design for reliability. Ph.D. thesis, University of Birmingham.

2008

Barry, Nathan (2008) Lead-free solders for high-reliability applications: high-cycle fatigue studies. Eng.D. thesis, University of Birmingham.

2007

Lockyer, Peter Stephen (2007) Controlling the interpolation of NURBS curves and surfaces. Ph.D. thesis, University of Birmingham.

2004

Buckley, John Richard (2004) A study of heterogeneous nucleation and electrostatic charge in steam flows. Ph.D. thesis, University of Birmingham.

2002

Chang, Wei-Chin (2002) An improved method of investigation of combustion parameters in a natural gas fuelled SI engine with EGR and H2 as additives. Ph.D. thesis, University of Birmingham.

Freear, Nicholas David (2002) Automated visual inspection for the quality control of pad printing. Ph.D. thesis, University of Birmingham.

Morison, Christopher Neil (2002) The dynamics of shaken baby syndrome. Ph.D. thesis, University of Birmingham.

2001

Fisher, Matthew (2001) Point-based mathematics for computer-aided manufacture. Ph.D. thesis, University of Birmingham.

1992

Jones, Martin Richard (1992) Feasibility studies of the exhaust-gas reforming of hydrocarbon and alcohol fuels. Ph.D. thesis, University of Birmingham.

1986

Al-Ayfari, Hadi H. K. (1986) Experimental measurement and mathematical modelling of meteorogical parameters for solar energy applications. Ph.D. thesis, University of Birmingham.

Clift, Sally Elizabeth (1986) Identification of defect locations in forged products using the finite-element method. Ph.D. thesis, University of Birmingham.

This list was generated on Sat May 28 06:45:14 2016 IST.