Number of items at this level: 63.
A
Abdullah, Nik Rosli (2011) Effects of split injection and exhaust gas recirculation strategies on combustion and emissions characteristics in a modern V6 diesel engine. Ph.D. thesis, University of Birmingham.
Al Lafi, Abdul Ghaffar (2009) Cross linked sulphonated poly (ether ether ketone) for the development of polymer electrolyte membrane fuel cell. Ph.D. thesis, University of Birmingham.
Al-Ghamdi, Khalid A. (2011) Improving the practice of experimental design in manufacturing engineering. Ph.D. thesis, University of Birmingham.
B
Barry, Nathan (2008) Lead-free solders for high-reliability applications: high-cycle fatigue studies. Eng.D. thesis, University of Birmingham.
C
Carlisle, Graeme Nigel (2012) Stiffness variation in hockey sticks and the impact on stick performance. M.Phil. thesis, University of Birmingham.
Chang, Wei-Chin (2002) An improved method of investigation of combustion parameters in a natural gas fuelled SI engine with EGR and H2 as additives. Ph.D. thesis, University of Birmingham.
Cheneler, David (2010) The Design and Analysis of a Micro Squeeze Flow Rheometer. Ph.D. thesis, University of Birmingham.
Ching, Heng Wei (2011) Airflow testing of aero-engine components. M.Phil. thesis, University of Birmingham.
Chong, Jun Jie (2013) The application of thermal, catalytic and non-thermal plasma oxidation processes to enhance NO-NO\(_2\)oxidation in the engine exhaust and improve DPF regeneration at lower temperatures. Ph.D. thesis, University of Birmingham.
Clift, Sally Elizabeth (1986) Identification of defect locations in forged products using the finite-element method. Ph.D. thesis, University of Birmingham.
Curtis, David Thomas (2011) Point grinding and electrolytic point grinding of Udimet 720. Ph.D. thesis, University of Birmingham.
D
Daus, Friedrich Herbert (2010) Process, microstructure and property relationships in dissimilar nickel base superalloy inertia friction welds. Ph.D. thesis, University of Birmingham.
E
Elsayed, Ahmed Mohamed (2011) Heat transfer in helically coiled small diameter tubes for miniature cooling systems. Ph.D. thesis, University of Birmingham.
Essa, Khamis Essa Ali (2011) Finite element prediction of deformation mechanics in incremental forming processes. Ph.D. thesis, University of Birmingham.
F
Fisher, Matthew (2001) Point-based mathematics for computer-aided manufacture. Ph.D. thesis, University of Birmingham.
Fotoohi, Babak (2011) A study of mechanochemical activation in solid-state synthesis of advanced ceramic composites. M.Phil. thesis, University of Birmingham.
Freear, Nicholas David (2002) Automated visual inspection for the quality control of pad printing. Ph.D. thesis, University of Birmingham.
G
Ghosh, Siddharth (2012) Investigation of techniques for the surface roughness characterisation of bovine articular cartilage. M.Phil. thesis, University of Birmingham.
Gill, Simaranjit Singh (2012) Controlling diesel NOx & PM emissions using fuel components and enhanced aftertreatment techniques: developing the next generation emission control system. Ph.D. thesis, University of Birmingham.
Guo, Yu (2010) A coupled DEM/CFD analysis of die filling process. Ph.D. thesis, University of Birmingham.
H
Hasan, Ahmad Omar (2011) Influence of prototype three way catalytic converter on regulated and unregulated emissions from gasoline HCCI/SI engine. Ph.D. thesis, University of Birmingham.
Hassanin, Hany Salama Sayed Ali (2011) Fabrication of ceramic and ceramic composite microcomponents using soft lithography. Ph.D. thesis, University of Birmingham.
Hu, Zhen Hua Sampson (2012) Antennas with frequency domain control for future communication systems. Ph.D. thesis, University of Birmingham.
J
Jabbary-Aslani, Farnaz (2011) Design attributes of spinal fusion cages and a surgical instrument to aid thier screw fixation. Ph.D. thesis, University of Birmingham.
Jiang, Zhuangde (2011) Fabrication and nanoroughness characterization of specific nanostructures and nanodevice. Ph.D. thesis, University of Birmingham.
Jones, Martin Richard (1992) Feasibility studies of the exhaust-gas reforming of hydrocarbon and alcohol fuels. Ph.D. thesis, University of Birmingham.
L
Lau, Chia Sheng (2012) Biogas upgrade through exhaust gas reforming process for use in CI engines. Ph.D. thesis, University of Birmingham.
Lester, Louise Elizabeth (2009) The biomechanical analysis of the hand in rheumatoid arthritis patients with MCP arthroplasty. M.Res. thesis, University of Birmingham.
Li, Huan (2010) Damage and repair evolution of cold formed linepipe steel. Ph.D. thesis, University of Birmingham.
Li, Yanfei (2012) Experimental study on spray and combustion characteristics of diesel-like fuels. Ph.D. thesis, University of Birmingham.
Luszcz, Pawel (2009) Combustion diagnostics in Homogeneous Charge Compression Ignition optical and thermal single cylinder engines. Ph.D. thesis, University of Birmingham.
M
Mahomed, Aziza (2009) Properties of elastomers for small-joint replacements. Ph.D. thesis, University of Birmingham.
Malboubi, Majid (2012) Study of gigaseal formation in patch clamping using nanotechnology. Ph.D. thesis, University of Birmingham.
Malik, Shoaib Ahmad (2011) Damage detection using self-sensing composites. Ph.D. thesis, University of Birmingham.
Mamat, Rizalman (2010) Performance and emission characteristics of an automotive diesel engine using biodiesel fuel with the influence of air intake variables. Ph.D. thesis, University of Birmingham.
Marigo, Michele (2012) Discrete element method modelling of complex granular motion in mixing vessels: evaluation and validation. Eng.D. thesis, University of Birmingham.
Melrose, Ben James (2011) The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851. M.Res. thesis, University of Birmingham.
Morison, Christopher Neil (2002) The dynamics of shaken baby syndrome. Ph.D. thesis, University of Birmingham.
Muhammad, Haseena Bashir (2012) Development of a bio-inspired MEMS based tactile sensor array for an artificial finger. Ph.D. thesis, University of Birmingham.
Murad, Noor Asniza (2011) Micromachined millimeter wave circuits. Ph.D. thesis, University of Birmingham.
O
Odili, Daniel Ifesinachi (2011) Simulation and microwave measurement of the conductivity of carbon nanotubes. Ph.D. thesis, University of Birmingham.
Ostadi-Valiabad, Hossein (2012) Micro and nano scale three-dimensional reconstruction of polymer electrolyte fuel cell porous layers. Ph.D. thesis, University of Birmingham.
P
Pan, Meng (2010) Using multiple layers and surface roughness control for improving the sensitivity of SRP sensors. M.Phil. thesis, University of Birmingham.
Parekh, Jugal (2012) Minimally invasive approach for surgical treatment of proximal femur fractures. Ph.D. thesis, University of Birmingham.
Parwana, Sudheer Singh (2011) Surface triangulation and the downstream effects on surface flattening. Ph.D. thesis, University of Birmingham.
Patel, Purvi Shantilal (2010) Screw fixation of implants to the spine. Ph.D. thesis, University of Birmingham.
Piaszyk, Jakub (2012) Animal fat (tallow) as fuel for stationary internal combustion engines. Ph.D. thesis, University of Birmingham.
Pylios, Theodoros (2010) A new metacarpophalangeal joint replacement arthroplasty. Ph.D. thesis, University of Birmingham.
R
Reed, Daniel Thomas (2010) An investigation into the synthesis and characterisation of metal borohydrides for hydrogen storage. Ph.D. thesis, University of Birmingham.
Rezk, Ahmed Rezk Masoud (2012) Theoretical and experimental investigation of silica gel / water adsorption refrigeration systems. Ph.D. thesis, University of Birmingham.
Rodríguez Sanmartín, Daniel (2011) Smart piezoelectric devices for X-ray optics applications. Ph.D. thesis, University of Birmingham.
Rossiter, James (2011) Multimodal intent recognition for natural human-robotic interaction. Ph.D. thesis, University of Birmingham.
S
Saedon, Juri Bin (2012) Micromilling of hardened (62 HRC) AISI D2 cold work tool steel. Ph.D. thesis, University of Birmingham.
Simms, Henry George (2011) Oxidation behaviour of Austenitic stainless steels at high temperature in supercritical plant. M.Res. thesis, University of Birmingham.
Sitshebo, Simbarashe Wilson Timothy (2011) HC-SCR of NO\(_x\) emissions over Ag-AL\(_2\)O\(_3\) catalysts using diesel fuel as a reductant. Ph.D. thesis, University of Birmingham.
Sunmola, Funlade Tajudeen (2013) Optimising learning with transferable prior information. Ph.D. thesis, University of Birmingham.
Surowiec, Agata (2011) Strategic change in the UK railway network through reorganization and major projects. M.Phil. thesis, University of Birmingham.
T
Tahhan Antar, Mohammad (2011) Minimum damage wire electrical discharge machining of aerospace alloys. Ph.D. thesis, University of Birmingham.
Turner, Dale Michael (2010) The combustion and emissions performance of fuel blends in modern combustion systems. Ph.D. thesis, University of Birmingham.
Twum, Stephen Boakye (2009) Multicriteria optimisation in design for reliability. Ph.D. thesis, University of Birmingham.
V
Vasta, Giuseppe (2012) Applications of perovskite oxide thin films: microcantilevers, superconducting devices and dielectric interconnections. Ph.D. thesis, University of Birmingham.
W
Wait, Claire Fiona (2011) The reuse and recycling of glass fibre waste. M.Res. thesis, University of Birmingham.
Z
Zabti, Mohamed Mohamed (2012) Effects of light absorber on micro stereolithography parts. Ph.D. thesis, University of Birmingham.
This list was generated on Tue May 21 03:46:07 2013 IST.
