Kitaguchi, Hiroto (2011). Inertia friction welded RR1000 and Inconel718 microstructure. University of Birmingham. Ph.D.
Full text not available from this repository.Abstract
Precipitation hardening Ni based superalloys have been widely used in gas turbine engine components owing to their stable microstructure at high temperature. To assemble these components, joining technology is necessary and friction welding is used for the joints which are suitable for large component welding, taking advantage of its superior mechanical properties compared to fusion welding.
Inertia friction welded RR1000 and Inconel718 microstructure was studied. In this study, grain boundaries were intensively characterized to rationalize the intergranular susceptible area from the microstructure point of view.
| Type of Work: | Thesis (Doctorates > Ph.D.) | ||||||
|---|---|---|---|---|---|---|---|
| Award Type: | Doctorates > Ph.D. | ||||||
| Supervisor(s): |
|
||||||
| College/Faculty: | Colleges (2008 onwards) > College of Engineering & Physical Sciences | ||||||
| School or Department: | School of Metallurgy and Materials | ||||||
| Funders: | None/not applicable | ||||||
| Subjects: | T Technology > T Technology (General) T Technology > TN Mining engineering. Metallurgy |
||||||
| URI: | http://etheses.bham.ac.uk/id/eprint/819 |
Actions
 |
Request a Correction |
 |
View Item |
Downloads
Downloads per month over past year