Browse by Supervisor

Schütt, Michael ORCID: 0000-0003-4857-7768 (2023). A digital twin of the human colon for the design and optimisation of colon-targeted drug delivery systems. University of Birmingham. Ph.D.

Bassi, Rachan (2011). Absolute instability in curved liquid jets. University of Birmingham. Ph.D.

Partridge, Lucy (2006). An experimental and theoretical investigation into the break-up of curved liquid jets in the prilling process. University of Birmingham. Ph.D.

Wood, Thomas A. (2019). An experimental study in the wetting of porous powders. University of Birmingham. Eng.D.

Alberini, Federico (2014). Blending of non-Newtonian fluids in static mixers: assessment via optical methods. University of Birmingham. Ph.D.

Golub, Stacey Ruth ORCID: 0000-0001-5146-7346 (2019). Characterisation and optimisation of biofilm and pellicle formation by Escherichia coli K-12. University of Birmingham. Ph.D.

Hawkins, Victoria (2011). Curved liquid jets: effect of scale, rheology and forced disturbances. University of Birmingham. Ph.D.

Gibson, Rebecca Louise ORCID: 0000-0002-0061-6150 (2022). Developing fundamental understanding of thermal processing of (catalyst) formulations. University of Birmingham. Eng.D.

Stamatopoulos, Konstantinos (2017). Development of a biorelevant dynamic model of human proximal colon: a tool for designing colon – specific drug delivery systems. University of Birmingham. Ph.D.

Leech, James Thomas (2018). Development of an Escherichia coli biofilm platform for use in biocatalysis. University of Birmingham. Ph.D.

Manchisi, James (2016). Development of sustainable adsorbents for wastewater treatment. University of Birmingham. Ph.D.

Burrill, Nathan Stuart (2015). Emulsion processing using the combined electrical and shear forces. University of Birmingham. M.Res.

Mehauden, Karin (2009). Evaluation of the thermal and mixing performance of an agitated vessel for processing of complex liquid foodstuffs. University of Birmingham. Ph.D.

Hamzah, Muhammad Hazwan Bin (2018). Extraction and modification of lignin to support enhanced utilisation using critical fluids. University of Birmingham. Ph.D.

Spencer, Matthew Richard (2014). Gas turbine lubricant evaluation. University of Birmingham. Eng.D.

Sedaie Bonab, Nazita (2015). Influence of solvent and scaleup upon the hydrogenation of 4-phenyl-2-butanone. University of Birmingham. Ph.D.

Ryan, David Jonathan (2015). Investigation of fluid dynamics and emulsification in Sonolator liquid whistles. University of Birmingham. Eng.D.

Lu, Yu (2018). Investigation of two-phase flow during liquid displacement in microchannels: experiments and CFD simulations. University of Birmingham. Ph.D.

Kiratzis, Ioannis ORCID: 0000-0002-7924-9153 (2021). Microfluidic investigation of dynamic surfactant rearrangement on water-oil interfaces during single droplet formation. University of Birmingham. Ph.D.

Neal, Grace (2012). Mixing during the filling process. University of Birmingham. M.Res.

Chung, Kenneth Hoi Kan (2009). Mixing in high throughput experimentation reactors. University of Birmingham. Ph.D.

Al-Herz, Mansour (2012). Multiphase catalytic reactions in a trickle bed reactor. University of Birmingham. Ph.D.

Oguh, Ukachukwu. I (2012). Multiphase contacting in PGM hydrometallurgy. University of Birmingham. Eng.D.

Romano, M.G. (2022). Non-Newtonian fluid mixing in agitated vessels in the transitional flow regime. University of Birmingham. Eng.D.

Askins, John Stephen (2010). Performance and supply of fluids in a modern gas turbine. University of Birmingham. Eng.D.

Ritchie, John Murray (2009). Pressure loss and heat transfer for single-phase turbulent flow in tubes fitted with wire-matrix inserts. University of Birmingham. Eng.D.

Kalnins, Raitis (2017). Production of prebiotic rich extracts from lignocellulosic biomass using subcritical water within the context of biorefining. University of Birmingham. Ph.D.

Wilkinson, Sam K (2014). Reaction kinetics in formulated industrial catalysts. University of Birmingham. Eng.D.

Motsi, Tafadzwa (2010). Remediation of acid mine drainage using natural zeolite. University of Birmingham. Ph.D.

Francia Garcia, Victor (2015). Spray drying of detergents in counter current towers: a study of turbulent swirling flows, fouling and agglomeration. University of Birmingham. Eng.D.

Challou, Floritsa (2016). Surface pasteurisation of food packages by the inversion method. University of Birmingham. Ph.D.

Mac Namara, Carl (2014). The physics of washing machines. University of Birmingham. Eng.D.

Ghorbanian Farah Abadi, Sara (2017). The role of rheology in the flow and mixing of complex fluids. University of Birmingham. M.Phil.

Critchley, Liam John (2016). The scale up of air-filled emulsion production. University of Birmingham. M.Sc.

Gurney, Christopher James (2010). The stability and control of curved liquid jet break-up. University of Birmingham. Ph.D.

Gurney, Christopher J (2010). The stability and control of curved liquid jet break-up. University of Birmingham. Ph.D.

Rafiee, Marjan (2014). Use of Positron Emission Particle Tracking (PEPT) for studying laminar mixing in static mixers. University of Birmingham. Ph.D.

Champion, James (2015). Use of computational fluid dynamics to improve the layer thickness control of polyester based multilayered films. University of Birmingham. Eng.D.

Robinson, Andrew (2015). Use of methods to investigate transport phenomena of multiphase turbulent flow. University of Birmingham. Ph.D.

Hammond, Georgina (2017). Using supercritical carbon dioxide as a tool for preserving culturally significant items. University of Birmingham. Ph.D.

Hackett, Louise Dawn (2014). Viability of engineered biocatalysts in biotransformation. University of Birmingham. M.Phil.

Hassall, Guy (2011). Wall build up in spray dryers. University of Birmingham. Eng.D.