Browse by Supervisor

Reynolds, Phillip John (2012). A Surlyn® ionomer as a self-healing and self-sensing composite. University of Birmingham. M.Res.

Zhang, Yan (2015). Blends of cyclic poly (butylene terephthalate)/multiwalled carbon nanotube nanocomposites prepared by in situ polymerizartion. University of Birmingham. M.Res.

Mahendran, Ramani Salmalee (2010). Characterisation of cross-linking and moisture ingress detection in an epoxy/amine resin using fibre-optic sensors. University of Birmingham. Ph.D.

Marsh, Joseph Jack (2017). Characterisation of crystallisation and melting in thermoplastic polymers using chip calorimetry. University of Birmingham. Ph.D.

Hamby, William (2022). Crystallisation and microstructure in stamp formed fibre reinforced polyamide 66. University of Birmingham. Ph.D.

Ojo, Samuel Olukunle (2017). Effect of surface treatment and recycling on the mechanical properties of e-glass. University of Birmingham. Ph.D.

Potoczny, Grzegorz A. (2012). Electro-mechanical behaviour of indium tin oxide coated polymer substrates for flexible electronics. University of Birmingham. Ph.D.

King, David Gareth (2018). Fibre-optic sensor development for process monitoring of epoxy resins. University of Birmingham. Ph.D.

Kolonko, Anna Magdalena (2012). Investigation into the mechanical performance of pipe grade HDPE with included silicon chips as a basis for future sensors. University of Birmingham. Ph.D.

Mohammed, Dilveen Waheed (2017). Mechanical and electro-mechanical reliability of transparent oxide thin films for flexible electronics applications. University of Birmingham. Ph.D.

Sierros, Konstantinos A. (2006). Mechanical properties and characterisation of substrates for flexible displays. University of Birmingham. Ph.D.

Chung, Ka Fai (2013). Processing and characterisation of liquid crystal nanocomposites. University of Birmingham. M.Res.

Carter, Joseph Lewis ORCID: https://orcid.org/0000-0001-5647-5214 (2022). Processing optimisation, conductivity enhancement & adhesion improvement of PEDOT:PSS films. University of Birmingham. Ph.D.

Mahomed, Aziza (2009). Properties of elastomers for small-joint replacements. University of Birmingham. Ph.D.

Fareed, Muhammad Amber (2010). Reinforced dental glass ionomer cements: from conventional to nanocomposites. University of Birmingham. Ph.D.

Kong , Yi (2003). Structure and property relationships in PET blends. University of Birmingham. Ph.D.

Madueke, Chioma (2021). Tensile properties of as-received and surface-treated coir fibres and composites. University of Birmingham. Ph.D.

Parkes, Andrew Martin (2018). The effect of thermal degradation on the crystallisation and mechanical properties of PEEK-glass fibre composites. University of Birmingham. Ph.D.

Burrows, Kyle (2013). The effects of acrylic acid on the electro-mechanical behaviour of ITO-coated polymer substrates for flexible display technologies. University of Birmingham. M.Res.

Hoskins, Thomas James (2015). The mechanical and tribological properties of PEEK gears. University of Birmingham. Ph.D.

Shao, Siheng (2023). The production and evaluation of highly-aligned nano-fibre preforms using electro-spinning. University of Birmingham. Ph.D.

Samsudin, Sani Amril (2010). The thermal behaviour and isothermal crystallisation of cyclic poly(butylene terephthalate)and its blends. University of Birmingham. Ph.D.

Bhogal, Amrita Kaur (2023). The thermal behaviour of polyamide-12 in the powder bed fusion process. University of Birmingham. Ph.D.