Browse by Supervisor

Melotti, Federico (2017). A novel aluminium nano-composite with enhanced mechanical properties. University of Birmingham. Ph.D.

Greenwood, Thomas (2015). An investigation into the removal of oxide films from molten A20X with the use of rotary impellor degassing. University of Birmingham. M.Res.

Wu, Zhaoxuan (2023). Deformation of Ti-6Al-4V micro-pillars with different β phase contents. University of Birmingham. Ph.D.

Hodaeian, Hamidreza (2013). Degradation of pure magnesium alloys in simulated body fluid. University of Birmingham. M.Res.

Qureshi, Mohammad Ali Ausaf ORCID: https://orcid.org/0000-0001-6954-2463 (2023). Development of a microscale numerical modelling method for the simulation of 3D powder bed printing of Bioceramics. University of Birmingham. Ph.D.

El-Sayed, Mahmoud Ahmed Mahmoud (2012). Double oxide film defects and mechanical properties in aluminium alloys. University of Birmingham. Ph.D.

Bangyikhan, Kittiphan (2005). Effects of oxide film, Fe-rich phase, porosity and their interactions on tensile properties of cast Al-Si-Mg alloys. University of Birmingham. Ph.D.

Ainsworth, Mark J (2011). Metal-foam interface stability during the filling of lost foam moulds with aluminium alloys. University of Birmingham. Ph.D.

Hayes, Ian (2018). Microstructural characterisation and heat treatment refinement of a particulate reinforced aluminium metal matrix composite. University of Birmingham. Ph.D.

Yue, Yang (2014). Modelling of the effects of entrainment defects on mechanical properties in Al-Si-Mg alloy castings. University of Birmingham. Ph.D.

Indrizzi, Vanessa ORCID: https://orcid.org/0000-0003-2244-1088 (2019). Modelling the filling and solidification of single crystal nickel-based superalloy turbine blades to understand freckle formation. University of Birmingham. Ph.D.

Watson, Robert (2016). New numerical techniques to quantify and predict the effect of entrainment defects, applied to high pressure die casting. University of Birmingham. Ph.D.

Burnard, David John (2015). Positron emission particle tracking of inclusions in cast liquid metals. University of Birmingham. Ph.D.

Nashwan, Zakareya (2023). Surface turbulence and the tensile properties, reproducibility and reliability of cast irons – a study of entrainment defects. University of Birmingham. Ph.D.

Beshay, Youssef Kamal (2010). The application of positron emission particle tracking to study non-metallic inclusions in metal castings. University of Birmingham. Ph.D.

Siavashi, Kiavash (2012). The effect of casting parameters on the fluidity and porosity of aluminium alloys in the aost foam casting process. University of Birmingham. Ph.D.

Chen, Qi (2017). The effect of transition metal additions on double oxide film defects in Al alloy castings. University of Birmingham. Ph.D.

Hinton, Elizabeth Mary (2016). The oxidation of liquid aluminium and the potential for oxides in grain refinement of aluminium alloys. University of Birmingham. Ph.D.