Browse by Supervisor

Song, Zihan (2023). 4D quantifications of intermetallics in solidifying aluminium alloys. University of Birmingham. Ph.D.

Corujeira Gallo, Santiago (2009). Active screen plasma surface engineering of austenitic stainless steel for enhanced tribological and corrosion properties. University of Birmingham. Ph.D.

Fu, Xin (2012). Active screen plasma surface modification of polymeric materials for biomedical application. University of Birmingham. Ph.D.

Jing, Zhiyuan (2021). Active-screen plasma reduction and multi-functionalisations of graphene oxide. University of Birmingham. Ph.D.

Li, Wei (2011). An investigation into the effect of stress on the formation and stability of carbon s-phase on austenitic stainless steel. University of Birmingham. Ph.D.

Liu, Qiongxi (2017). An investigation of the stability of advanced carbon-based coatings under high temperature and high pressure. University of Birmingham. Ph.D.

Liang, Yuan (2017). An investigation on the optimum aging condition for HFQ-processed AA6082 aluminium alloy. University of Birmingham. M.Sc.

Fidiani, Elok (2021). Catalyst electrode development from one-dimensional platinum silver-based alloy nanostructures for proton exchange membrane fuel cells. University of Birmingham. Ph.D.

Xiong, Xinhe (2023). Catalytic ceramic conversion of Zr702 alloy surfaces for combating wear and corrosion. University of Birmingham. Ph.D.

Jantara Junior, Valter Luiz (2019). Damage mechanics and condition monitoring of wind turbine gearbox materials. University of Birmingham. Ph.D.

Ji, Xiaochao (2018). Development and characterisation of multifunctional one-dimensional fibres reinforced composite coatings. University of Birmingham. Ph.D.

Ji, Ran (2013). Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools. University of Birmingham. Ph.D.

Lin, Kaijie (2015). Development of advanced plasma surface technologies for high performance carbon paper gas diffusion layer and 316 stainless steel bipolar plates. University of Birmingham. Ph.D.

Dashtbozorg, Behnam (2021). Development of durable antibacterial stainless steel surfaces through plasma nitriding and ultrashort pulsed laser texturing. University of Birmingham. Ph.D.

Formosa, Dennis (2015). Development of long-lasting antibacterial S-phase based coatings for medical devices. University of Birmingham. Ph.D.

Alexander, James Edward ORCID: https://orcid.org/0000-0002-9242-1683 (2022). Effect of catalytic films on ceramic conversion treatment of titanium alloys for medical devices. University of Birmingham. Ph.D.

Liang, Yana (2022). Enhancement and evaluation of PAN-derived carbon fibres and resulting composites by active screen plasma surface modification. University of Birmingham. Ph.D.

Qi, Shaojun (2017). Fabrication and characterisation of graphene-based multi-functional coatings. University of Birmingham. Ph.D.

Khan, Ikra (2021). Improving the cytocompatibility and infection, wear and corrosion resistances of commercially pure titanium by laser micropatterning and ceramic conversion treatment. University of Birmingham. Ph.D.

Zhang, Shiling (2017). Improving the tribological and corrosion properties of Zr702 and Zircaloy-4 alloys by Ceramic Conversion Treatment. University of Birmingham. Ph.D.

Zhou, Jun (2017). Investigation of surface engineering and monitoring for reliable wind turbine gearboxes. University of Birmingham. Ph.D.

Michalek, Aleksandra ORCID: https://orcid.org/0000-0001-7057-7671 (2022). Laser induced periodic surfaces structures: advances in modelling, processing and monitoring. University of Birmingham. Ph.D.

Romano, Jean-Michel ORCID: https://orcid.org/0000-0001-6264-9815 (2019). Laser-based manufacturing routes for functionalizing surfaces. University of Birmingham. Ph.D.

Cook, Louise (2012). Low temperature active-screen plasma surface alloying of precipitation hardening stainless steels. University of Birmingham. M.Res.

du Plessis, Andrew (2012). Low temperature plasma surface modification of stainless steels for ice sliding applications. University of Birmingham. M.Res.

Kenny, Jonathan (2019). Machineable graphene toughened boron carbide nanocomposite armour (MaGiC) for lightweight armour applications. University of Birmingham. Ph.D.

Bell, Gerard Anthony (2012). Novel nanomechanical property instrumentation development and its application to surface engineered systems. University of Birmingham. Eng.D.

Buhagiar, Joseph (2008). Plasma surface engineering and characterisation of biomedical stainless steels. University of Birmingham. Ph.D.

Carlisle, Graeme Nigel (2012). Stiffness variation in hockey sticks and the impact on stick performance. University of Birmingham. M.Phil.

Walters, Elliot Alexander (2020). Study of the anti-coking properties of a new centrifugally cast alloy for ethylene cracker furnaces. University of Birmingham. Ph.D.

Liu, Ran (2013). Surface modification of ASTM F-1537 Co-Cr alloy by low temperature plasma surface alloying. University of Birmingham. M.Res.

Dou, Wenbo (2014). Surface modification of lean duplex stainless steels by low temperature plasma nitriding. University of Birmingham. M.Res.

Redmore, Eleanor (2011). Surface treatment of a low-cost beta titanium alloy to combat wear. University of Birmingham. M.Res.

Della Roverys Coseglio, Mario Sergio (2018). Susceptibility of low-temperature plasma nitrided 17-4 PH (H1150D) to sulphide stress cracking (SSC) in typical oilfield environment. University of Birmingham. Ph.D.

Hamilton, Philip John (2014). The development of PVD coatings for PEM fuel cell bipolar plates. University of Birmingham. Ph.D.

Mukinay, Tatiana ORCID: https://orcid.org/0000-0002-0228-3038 (2020). The development of antibacterial and wear resistant Ti6Al4V surfaces by silver doping, selective laser melting and thermal oxidation. University of Birmingham. Ph.D.

Luo, Xia (2014). The response of ASTM F1537 Co-28Cr-6Mo alloy with different phase constituents to low-temperature plasma carburising. University of Birmingham. Ph.D.

Dong, Yangchun (2011). Towards multi-functional stainless steel surface: plasma surface alloying with N, Ag and Cu. University of Birmingham. Ph.D.

Zhou, Jun (2014). Towards the designer surface for ceramic injection moulds. University of Birmingham. M.Phil.