Browse by Supervisor

Wang, Fei (2017). Austenite grain growth behaviour of HSLA steel during reheating treatment. University of Birmingham. Ph.D.

Kostryzhev, Andrii Gennadiovych (2009). Bauschinger effect in Nb and V microalloyed line pipe steels. University of Birmingham. Ph.D.

Zhang, Dayue (2015). Characterisation and modelling of segregation in continuously cast steel slab. University of Birmingham. Ph.D.

Davies, Scott Philip (2014). Characterisation of novel PRMT1 interacting proteins AND Hepatocyte-Lymphocyte cell-in-cell structures: Implications for the host cell. University of Birmingham. M.Res.

Haenschke, Titus Paul (2013). Degradation of TiNi-based shape memory alloys (SMAs) during thermo-mechanical cycling. University of Birmingham. Ph.D.

Molokanov, Aleksej (2017). Design of the high-strength gear steels for use in advanced power transmission for low-emission aero-engines. University of Birmingham. Ph.D.

Du, Jinlong (2017). Development of high strength hot rolled strip steel products with bainitic microstructures. University of Birmingham. Ph.D.

Zhou, Hansen (2014). EM sensor measurements of degradation in steels. University of Birmingham. M.Res.

Goodall, Aimee Louise (2020). Effect of initial microstructural conditions and tempering parameters on the carbide characteristics and hardness of alloyed quenched and tempered steel. University of Birmingham. Ph.D.

Du, Jinlong (2012). Examination of the effect of tin particles and grain size on the charpy impact transition temperature in steels. University of Birmingham. M.Res.

Kundu, Amrita (2011). Grain structure development during casting, reheating and deformation of Nb-microalloyed steel. University of Birmingham. Ph.D.

Tovee, John-Paul (2014). Microstructural influence on the effects of forward and reverse mechanical deformation in HSLA X65 and X80 linepipe steels. University of Birmingham. Ph.D.

Attallah, Moataz (2008). Microstructure property development in friction stir welds of aluminim based alloys. University of Birmingham. Ph.D.

Watson, Christopher (2015). Modelling high integrity steel forgings for turbine applications in the power generation industry. University of Birmingham. Eng.D.

Neumann, Daniel (2020). Modelling the ultrasonic scatter of complex microstructures in heavy rotor forgings. University of Birmingham. Eng.D.

Zhou, Lei (2015). Non-destructive characterisation of steel microstructures using electromagnetic sensors. University of Birmingham. Ph.D.

Jolley, Kena R (2020). Optimisation of the guided wave technology for inspection and health monitoring of polymer matrix composites. University of Birmingham. Ph.D.

Kahlon, Navdeep Singh (2019). Power plant materials condition monitoring and degradation assessment. University of Birmingham. Eng.D.

Kaonda, Mususu Kosta Mpongo (2017). Prediction of the recrystallised grain size distribution after deformation for the Nb free and model steel. University of Birmingham. Ph.D.

Kalinowski, Piotr (2017). Recrystallisation and grain size development during forging in power generation steels. University of Birmingham. Ph.D.

Roberts, Josh (2013). The analysis of kickpoints in carbon fibre composite golf shafts. University of Birmingham. M.Res.

Davis, Amelia (2014). The characterisation and assessment of curvature in asymmetric carbon fibre composite laminates. University of Birmingham. M.Phil.

Rowshandel, Hamed (2014). The development of an autonomous robotic inspection system to detect and characterise rolling contact fatigue cracks in railway track. University of Birmingham. Ph.D.

Driscoll, Jonathan Richard (2018). The effect of tempering parameters on the hardness and precipitation characteristics of quenched and tempered RQT701 steel plate. University of Birmingham. M.Sc.

Slater, Carl (2012). The static and dynamic behaviour of carbon fibre composites used in golf club shafts. University of Birmingham. Ph.D.

Punch, Rachel Bridget (2014). Toughness enhancement of high strength low alloy strip steels. University of Birmingham. Ph.D.