Up a level |
Lyu, Yang (2022). A study of precipitates in Mg-Sn alloys. University of Birmingham. Ph.D.
Attard, Bonnie ORCID: 0000-0002-1270-7332 (2022). Additive manufacturing of graded microstructures for aeroengine components. University of Birmingham. Ph.D.
Pereira, Thiago Soares (2017). Bauschinger effect in macro and micro sized high strength low alloy pipeline steels. University of Birmingham. Ph.D.
Mao, Jishen (2012). Characterisation of plasma arc technology processed waste products. University of Birmingham. M.Res.
Su, Tina Yu-Ting (2014). Deformation twinning in magnesium using nano-indentation. University of Birmingham. M.Phil.
Harrison, Nicholas (2014). Equal channel angular pressing of elemental & alloyed P/M aluminium systems. University of Birmingham. Ph.D.
Zhao, Xinxin (2014). Fabrication and plastic deformation of copper at small scales. University of Birmingham. Ph.D.
Tian, Jinsen (2019). Grain boundary segregation of P and its interaction with Cr and Mo in Ni-base alloys. University of Birmingham. Ph.D.
Lu, Xinyu (2017). In-situ transmission electron microscopy study of dislocation in TI-6AL-4V. University of Birmingham. Ph.D.
Si, Shanshan (2020). Micromechanical study of the role of precipitates on the plastic deformation of AZ91 magnesium alloy. University of Birmingham. Ph.D.
Douglas, Gareth (2018). Microstructural characterisation and modelling of dilute magnesium-tin-aluminium alloys. University of Birmingham. Ph.D.
Oluwasegun, Kunle Michael (2012). Microstructural characterisation of inertia friction welded RR1000 superalloy. University of Birmingham. Ph.D.
Lu, Yu (2014). Microstructure and degradation behaviour of Mg-Zn(-Ca) alloys. University of Birmingham. Ph.D.
Wu, Jing (2016). Microstructure and mechanical properties of Mg-Zn-(Y/Gd) alloys. University of Birmingham. Ph.D.
Song, Xiaoning (2011). Microstructure and mechanical properties of electrodeposited copper films. University of Birmingham. M.Phil.
Guo, Yina (2013). Microstructure and texture characterisation of linear friction welding of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo. University of Birmingham. Ph.D.
Wang, Minshi (2017). Microstructure characterisation and creep modelling of HP40 alloys. University of Birmingham. Ph.D.
Mohammed Ameen, Rayan Basheer (2017). Plastic deformation of Ti-6Al-4V at small scale: a microstructural and mechanistic study. University of Birmingham. Ph.D.
Liu, Zhaoran (2017). Plastic deformation of Ti-6Al-4V micro-pillars at room temperature. University of Birmingham. Ph.D.
Zeng, Ruilin (2013). Precipitation hardening in AZ91 magnesium alloy. University of Birmingham. Ph.D.
Rai, Subash (2019). Role of sulphur on carbon deposition on AGR fuel cladding steel. University of Birmingham. Ph.D.
Ghori, Ubaid-ur-Rehman (2020). Temperature dependent plastic deformation of magnesium using micro-pillar compression. University of Birmingham. Ph.D.
Hawes, Jonathan E. D. (2021). The causes of increased hydrogen uptake of zirconium based fuel claddings at high burnup. University of Birmingham. Ph.D.
Pang, Bo (2016). The defect evolution in shock loaded tantalum single crystals. University of Birmingham. Ph.D.
Keown, Eugene Michel (2017). The effect of compressive residual stresses on the properties of tumbled-processed cemented carbide. University of Birmingham. M.Sc.
Higgins, Daniel Louis (2017). The response of metals with different crystal structures to high strain rate loading and other mechanical tests. University of Birmingham. Ph.D.
Jiang, Siben (2019). Thermally induced sensitisation of austenitic stainless steel for AGR fuel cladding. University of Birmingham. Ph.D.