Browse by Supervisor

Tang, Haodong ORCID: 0000-0002-5632-5096 (2021). Advanced near-infrared photodetectors based on lead sulfide quantum dots. University of Birmingham. Ph.D.

Jiang, Tianchu (2022). Ansys-based air-bearing models and air-bearing systems for turbomachinery. University of Birmingham. Ph.D.

Abdorahimi, Danial (2018). Comparison of radio frequency path loss models in soil for wireless underground sensor networks. University of Birmingham. M.Phil.

Mahmoodi, Nasim (2017). Design and development of MEMS biosensors. University of Birmingham. Ph.D.

Sadeghioon, Ali Mollazadeh (2015). Design and development of wireless underground sensor networks for pipeline monitoring. University of Birmingham. Ph.D.

Pakle, Sagar ORCID: 0000-0002-3737-0959 (2020). Design of low inertia and high performance radial compressor and turbine for high-speed turbomachinery. University of Birmingham. Ph.D.

Chitsaz Charandabi, Sahand (2014). Development of a Lorentz force drive system for a torsional paddle microresonator using Focused Ion Beam machining. University of Birmingham. Ph.D.

Luan, Tianshi (2017). Development of a remote optically actuated and interrogated passive sensor with micro corner cube reflector structure. University of Birmingham. Ph.D.

Cao, Siyang (2016). Flexible bond wire capacitive strain sensor for a vehicle tyre. University of Birmingham. Ph.D.

Alqattan, Bader Ahmad (2019). Holographic laser ablation for nanopatterning. University of Birmingham. Ph.D.

Walton, Robert (2014). Indirect conversion radioisotopic battery for buried asset condition monitoring. University of Birmingham. Ph.D.

Kubba, Ammar Issam Salih (2018). Intelligent tyre technologies. University of Birmingham. Ph.D.

Alqurashi, Tawfiq (2019). Laser based manufacturing of optical diffusers. University of Birmingham. Ph.D.

Faraji-Rad, Zahra (2016). Microneedles Fabrication for Subcutaneous Fluid Sampling and Drug Delivery. University of Birmingham. Ph.D.

Mohammadkhani, Ali (2013). Modified colloidal lithography: a flexible tool for fabrication of periodic nanostructures. University of Birmingham. Ph.D.

Wang, Guanxiong (2016). Multi-level filter based on H shaped channels. University of Birmingham. Ph.D.

Sabouri, Aydin (2015). Nanofabrication by means of focused ion beam. University of Birmingham. Ph.D.

Khalid, Muhammad (2019). Nanofabrication via laser interference lithography and integration of various optical systems for remote sensing applications. University of Birmingham. Ph.D.

Farai, Omotayo Oreoluwa (2021). Novel communication system for buried water pipe monitoring using acoustic signal propagation along the pipe. University of Birmingham. Ph.D.

Zhao, Qiancheng (2016). Printable surface hologram via nanosecond laser ablation. University of Birmingham. M.Sc.

Niazi, Ayda (2016). Real time measurement of oxygen by integrating a clark sensor with low cost printed circuit board technology and solid electrolyte membrane. University of Birmingham. Ph.D.

Rashid, Ijaz ORCID: 0000-0001-5502-1392 (2020). Study, investigate and fabricate optical nanostructures and devices using advanced techniques and novel materials. University of Birmingham. Ph.D.

Sadak, Ferhat (2021). Vision guided automation for intra-cytoplasmic sperm injection. University of Birmingham. Ph.D.