Browse by Supervisor

Al-Mousawi, Fadhel (2018). Adsorption system for cooling and power generation using advanced adsorbent materials. University of Birmingham. Ph.D.

White, John (2013). CFD simulation of silica gel and water adsorbent beds used in adsorption cooling system. University of Birmingham. Ph.D.

Jayakody, Harith Eranga (2019). Cryogenic energy for indirect freeze desalination – numerical and experimental investigation. University of Birmingham. Ph.D.

Al Jubori, Ayad Mahmoud Salman (2017). Development and optimization of efficient small-scale turbines for organic rankine cycle powered by low-temperature heat sources. University of Birmingham. Ph.D.

Abdullahi, Bala (2015). Development and optimization of heat pipe based compound parabolic collector. University of Birmingham. Ph.D.

Khalil, Khalil Mohammed (2018). Development and optimization of small-scale axial turbines for distributed cryogenic energy storage system. University of Birmingham. Ph.D.

Rahbar, Kiyarash (2016). Development and optimization of small-scale radial inflow turbine for waste heat recovery with organic rankine cycle. University of Birmingham. Ph.D.

Aldossary, Abdulrahman S. (2017). Development and performance characterisation of high concentrating multi-junction PV/Thermal technology. University of Birmingham. Ph.D.

Al-Shohani, Wisam A. M. (2018). Development and performance of concentrated optical water filter for photovoltaic applications. University of Birmingham. Ph.D.

Tozer, Gavin ORCID: https://orcid.org/0000-0003-0248-1015 (2020). Development of a static shaft Wankel expander for small-scale applications. University of Birmingham. Ph.D.

Shi, Baosheng (2015). Development of an MOF based adsorption air conditioning system for automotive application. University of Birmingham. Ph.D.

Sadiq, Ghada Abbas (2018). Development of compressed air rotary wankel devices for hybrid vehicle. University of Birmingham. Ph.D.

Alamri, Yassir Ali S (2022). Development of high concentrating photovoltaic/ thermal system. University of Birmingham. Ph.D.

Almajri, Ahmad Khalid Boubaker (2019). Development of new micro-channels segmented regenerator for v-type alpha Stirling engine. University of Birmingham. Ph.D.

Algareu, Abdulmaged Omer (2017). Development of reflective low concentrated photovoltaic/ thermal system. University of Birmingham. Ph.D.

KarimNejadAliabadi, Parya (2017). Development of thermoelectric cooling system for tissue ablation. University of Birmingham. Ph.D.

Li, Ji (2021). Driver-oriented intelligent control methodology for series-parallel hybrid electric vehicles. University of Birmingham. Ph.D.

Embaye, Mebrahtu (2016). Enhancement of panel radiator based hydronic central heating system using flow pulsation. University of Birmingham. Ph.D.

Alammar, Ahmed Ali Ghulfus (2018). Enhancing thermal performance of heat pipe based solar thermal collector. University of Birmingham. Ph.D.

Mardani, Moloud (2023). Exhaust thermochemical recovery in low carbon vehicles via catalytic reforming of renewable fuels. University of Birmingham. Ph.D.

Youssef, Peter George Asaad (2018). Experimental and numerical investigation of a new MOF based adsorption water desalination system. University of Birmingham. Ph.D.

Dakkama, Hassan Jawdat Fadhiel (2017). Experimental investigation of MOF adsorption system for ice making, freeze water desalination and cooling applications. University of Birmingham. Ph.D.

Coratella, Carlo (2021). Experimental investigation of the non-uniformity of jets’ velocities exiting a multi-hole injector. University of Birmingham. Ph.D.

Elsayed, Ahmed Mohamed (2011). Heat transfer in helically coiled small diameter tubes for miniature cooling systems. University of Birmingham. Ph.D.

Sittichompoo, Sak ORCID: https://orcid.org/0000-0003-1472-7078 (2022). Hydrogen carriers fuel reforming for on-board hydrogen production with heat recovery. University of Birmingham. Ph.D.

Mosli, Izazi Aqilah (2015). Investigation into the effect of mesh size on adsorber bed pressure drop performance for solar powered air conditioning system. University of Birmingham. M.Res.

Saleh, Majdi Massoud Idris (2021). Metal organic framework material adsorption system for cooling, desalination and heat storage applications. University of Birmingham. Ph.D.

Alfarawi, Suliman Salim (2017). Modelling and optimization of High Temperature Difference (HTD) gamma-type Stirling engine prototype. University of Birmingham. Ph.D.

Albaik, Ibrahim A. A. ORCID: https://orcid.org/0000-0003-0280-7214 (2022). Numerical and experimental development of an efficient adsorption desalination and cooling system. University of Birmingham. Ph.D.

Hussein, Eman (2018). Numerical and experimental evaluation of advanced metal-organic framework materials for adsorption heat pumps. University of Birmingham. Ph.D.

Bahr Ennil, Ali (2017). Optimization of small-scale axial turbine for distributed compressed air energy storage system. University of Birmingham. Ph.D.

Daabo, Ahmed Mahmood Abdullah (2018). Stress analysis and aerodynamic optimization of small-scale compressed air turbines. University of Birmingham. Ph.D.

Rashid, Ijaz ORCID: https://orcid.org/0000-0001-5502-1392 (2020). Study, investigate and fabricate optical nanostructures and devices using advanced techniques and novel materials. University of Birmingham. Ph.D.

Rezk, Ahmed Rezk Masoud (2012). Theoretical and experimental investigation of silica gel / water adsorption refrigeration systems. University of Birmingham. Ph.D.