eTheses Repository

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Author | Year of Award
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | O | P | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 129.

A

Abu Aisheh, Yazan (2011) Climate change and the built environment: an evaluation of sustainable refurbishment options for higher education buildings in the UK. Ph.D. thesis, University of Birmingham.

Adrwish, Salahadin Muhammed Ali (2013) The processing and characterisation of recycled NdFeB based magnets. Ph.D. thesis, University of Birmingham.

Ahmad, Hesham Saleh Mahmoud (2011) Development of KM model for knowledge management implementation and application in construction projects. Ph.D. thesis, University of Birmingham.

Al-Ghamdi, Khalid A. (2011) Improving the practice of experimental design in manufacturing engineering. Ph.D. thesis, University of Birmingham.

Al-Janabi, Shahad Sadeq (2013) Chlorine quenching phenomena and the application of fluorescence spectroscopy in drinking water. Ph.D. thesis, University of Birmingham.

Al-Mutlaq, Fahad Mohammed (2011) Aspects of the use of electric arc furance dust in concrete. Ph.D. thesis, University of Birmingham.

Al-Rubaee, Rasha Hassan (2012) A conceptual model to effectively prioritise recovery of roads damaged by natural/man-made disasters. Ph.D. thesis, University of Birmingham.

Ali, Mir Shabbar (2001) An accessibility-activity based approach for modelling rural travel demand in developing countries. Ph.D. thesis, University of Birmingham.

Angulo-Fernandez, Ursula (2011) Effect of iron dosing on metal and phosphorus behaviour in anaerobic digesters. M.Phil. thesis, University of Birmingham.

B

Ballard, Herman Glenn (2000) The last planner system of production control. Ph.D. thesis, University of Birmingham.

Barker, Duncan James (2010) Evaluation of microwave microscopy for dielectric characterisation. Ph.D. thesis, University of Birmingham.

Bieroza, Magdalena Zofia (2010) Characterising water treatment works performance using fluorescence spectroscopy. Ph.D. thesis, University of Birmingham.

Bleetman, Anthony (2000) Safety standards for police body armour. Ph.D. thesis, University of Birmingham.

Boamah, Paulina Agyekum (2010) Development of models for optimal road maintenance fund allocation : A case of Ghana. Ph.D. thesis, University of Birmingham.

Bolorforoush, Mohammad (2014) Sustainable energy strategy for historic churches and cathedrals in the UK. M.Phil. thesis, University of Birmingham.

Bradford, William (2012) An evaluation of the historical approaches to uncertainty in the provision of Victorian reservoirs in the UK, and the implications for future water resources planning. Ph.D. thesis, University of Birmingham.

Brown, Daniel (2009) The management of Trihalomethanes in water supply systems preferred access arrangement. Ph.D. thesis, University of Birmingham.

Brown, Zoe Katherine (2010) The drying of foods using supercritical carbon dioxide. Eng.D. thesis, University of Birmingham.

Brueckner, Rene (2008) Accelerating the thaumasite form of sulfate attack and an investigation of its effects on skin friction. Ph.D. thesis, University of Birmingham.

C

Carrion Schafer, Benjamin (2003) Acceleration of the discrete element method on a reconfigurable co-processor. Ph.D. thesis, University of Birmingham.

Chen, Xudong and Yang, Jian (2013) Investigation on the impact damage of glass using the combined finite/discrete element method. Ph.D. thesis, University of Birmingham.

Chen, Yao (2013) Improving Railway Safety Risk Assessment Study. Ph.D. thesis, University of Birmingham.

Chen, Ziyu (2013) The crystallization of Poly(ethylene terephthalate) studied by thermal analysis and FTIR spectroscopy. Ph.D. thesis, University of Birmingham.

Cheng, Yingyao (2013) Numerical modelling of the interaction between oat plants and realistic wind loading. M.Phil. thesis, University of Birmingham.

Chiu, Yen-Lin (2014) Joining behaviour of crystalline and amorphous Zr-based alloy using Cu-based braze. M.Phil. thesis, University of Birmingham.

Chlebek, Jennifer (2009) Modelling of simple prismatic channels with varying roughness using the SKM and a study of flows in smooth non-prismatic channels with skewed floodplains. Ph.D. thesis, University of Birmingham.

Chung, Ka Fai (2013) Processing and characterisation of liquid crystal nanocomposites. M.Res. thesis, University of Birmingham.

Constandinides, George (2014) Thermal management and control of a homogeneous charge compression ignition (HCCI) engine. Ph.D. thesis, University of Birmingham.

Cui, Xilin (2013) Numerical simulation of internal fluidisation and cavity evolution due to a leaking pipe using the coupled DEM-LBM technique. Ph.D. thesis, University of Birmingham.

Curioni, Giulio (2013) Investigating the seasonal variability of electromagnetic soil properties using field monitoring data from Time-Domain Reflectometry probes. Ph.D. thesis, University of Birmingham.

Curnick, Oliver J. (2012) Ionomer-stabilised Pt and Pt-Ti bimetallic electrocatalysts for the proton exchange membrane fuel cell. Ph.D. thesis, University of Birmingham.

D

Doan, Vinh Thi Thuy (2013) Integrated design solution of a residential structural insulated panel dwelling. Ph.D. thesis, University of Birmingham.

Dorigatti, Francesco (2013) Rail vehicles in crosswinds: analysis of steady and unsteady aerodynamic effects through static and moving model tests. Ph.D. thesis, University of Birmingham.

Du, Jinlong (2012) Examination of the effect of tin particles and grain size on the charpy impact transition temperature in steels. M.Res. thesis, University of Birmingham.

Durrant, Alec James (2014) The effect of microstructure and composition on HDDR processing of scrap magnets. M.Res. thesis, University of Birmingham.

de Sá Ribeiro, Albina Maria (1994) Studies of gas-liquid flow in bends. Ph.D. thesis, University of Birmingham.

E

Esa, Mazlina (1996) Electrically small high-temperature superconducting Y-Ba-Cu-O meander dipole antennas for space-limited applications. Ph.D. thesis, University of Birmingham.

F

Farah, Ali Mohamud (2012) Generalized and quadratic eigenvalue problems with hermitian matrices. M.Phil. thesis, University of Birmingham.

Ferley, Simon Julius John (2014) An examination of the effects of geological and glacigenic controls on the engineering properties of till using a domain based approach. Ph.D. thesis, University of Birmingham.

Fonseca, Monica Rosalia Jaime (2012) An engineering understanding of the small intestine. Ph.D. thesis, University of Birmingham.

Frackowiak, Marcin (2010) Modelling and diagnostic study of flow in an optical engine with negative valve overlapping for homogeneous charge compression ignition. Ph.D. thesis, University of Birmingham.

G

Gilbert, Timothy (2014) Aerodynamic effects of high speed trains in confined spaces. Ph.D. thesis, University of Birmingham.

Gomo, Panganai (2011) A discrete graph Laplacian for signal processing. M.Phil. thesis, University of Birmingham.

Gong, Guobin (2008) DEM [Discrete Element Method] simulations of drained and undrained behaviour. Ph.D. thesis, University of Birmingham.

Gouseti, Ourania (2012) Development and evaluation of a device for optimum quality simultaneous rheological and morphological characterisation of complex fluids. Ph.D. thesis, University of Birmingham.

Guha, Pritha (2012) On scale-scale curves for multivariate data based on rank regions. Ph.D. thesis, University of Birmingham.

Gunawan, Budi (2010) A study of flow structures in a two-stage channel using field data, a physical model and numerical modelling. Ph.D. thesis, University of Birmingham.

Gunson, James (2011) Effect of sensitisation on the corrosion fatigue properties of AA5456-H116. M.Res. thesis, University of Birmingham.

H

Hackett, James Arthur (2011) The role of cost estimators in UK construction; a case for and steps towards an estimating profession. Ph.D. thesis, University of Birmingham.

Haider, Mohammed Ziaul (2009) A Methodology to Assess Data Variability and Risk in a Pavement Design System for Bangladesh. M.Phil. thesis, University of Birmingham.

Harris, Christopher Nicholas (2014) Climate change-induced water shortages: improving decision-making in an uncertain future. Ph.D. thesis, University of Birmingham.

Hatefi, Arash (2013) Direct Laser Fabrication of Ti-5553. M.Res. thesis, University of Birmingham.

Hayes, Russell (2013) Development of a sustainability assessment methodology for UK streetworks projects. Ph.D. thesis, University of Birmingham.

Holt, Daniella Godinho Abreu (2011) Sustainable assessment for geotechnical projects. Ph.D. thesis, University of Birmingham.

Hu, Jing (2011) Solution of partial differential equations using reconfigurable computing. Ph.D. thesis, University of Birmingham.

Huang, Danguang (2011) Flexible design of urban water distribution systems. Ph.D. thesis, University of Birmingham.

Humphreys, Nicholas James (2013) The computational modelling of centrifugal casting, as a process to manufacture titanium aluminide aero engine components. Ph.D. thesis, University of Birmingham.

I

Iqbal, Tasawar (2011) An investigation on the effect of solution concentration, applied voltage and collection distance on electrospun fibres of PVA solutions. M.Res. thesis, University of Birmingham.

Ishaq, Farryad (2012) Trace metal supplementation in wastewater sludge digesters. Ph.D. thesis, University of Birmingham.

J

Jesson, Michael Andrew (2012) The effect of heterogeneous roughness on conveyance capacity and application to the Shiono-Knight method. Ph.D. thesis, University of Birmingham.

Jiang, Yun (2013) Fabrication and characterisation of novel ultrasound transducers. Ph.D. thesis, University of Birmingham.

John, Unyime Edet (2011) Chemical performance of cement stabilised contaminated clay. Ph.D. thesis, University of Birmingham.

K

Kaklamani, Georgia (2012) The effect of active screen plasma nitriding on the cellular compatibility of polmeric biomaterials. Ph.D. thesis, University of Birmingham.

Kolonko, Anna Magdalena (2012) Investigation into the mechanical performance of pipe grade HDPE with included silicon chips as a basis for future sensors. Ph.D. thesis, University of Birmingham.

Konaraddi, Vitthal (2013) Hot isostatic pressing / diffusion bonding of Ti-6Al-4V. Ph.D. thesis, University of Birmingham.

Kuruvita Arachchige Don, Lasitha Priyanga Karunarathna (2014) Low-velocity impact analysis of monolithic and laminated glass using finite element method (FEM). M.Phil. thesis, University of Birmingham.

L

Langroudi, Arya Assadi (2014) Micromechanics of collapse in loess. Ph.D. thesis, University of Birmingham.

Lees, G. (1967) The design of aggregate gradings to minimum and controlled porosity - a study of packing characteristics and void characteristics in aggregates. Ph.D. thesis, University of Birmingham.

Leung, Chin Pui Perry (2013) Exhaust gas fuel reforming to achieve fuel saving. Ph.D. thesis, University of Birmingham.

Li, Gan (2012) Stochastic analysis and optimization of power system steady-state with wind farms and electric vehicles. Ph.D. thesis, University of Birmingham.

Li, Jun (2013) Numerical investigations of the coupled DEM-LBM technique with application to leakage-soil interaction due to a leaking pipe. Ph.D. thesis, University of Birmingham.

Lieb, Ralf (2011) Horizontal and vertical transport in a multilayered aquifer of the Triassic sandstone, UK – tracer tests and modeling. M.Phil. thesis, University of Birmingham.

Liu, Li (2014) Computational fluid dynamics modelling of complex fluid flow in stirred vessels. Ph.D. thesis, University of Birmingham.

Liu, Qiang (2012) Structural analysis and design of cold formed steel sigma purlins. Ph.D. thesis, University of Birmingham.

M

Madun, Aziman (2012) Seismic evaluation of vibro-stone column. Ph.D. thesis, University of Birmingham.

Malik, Shoaib Ahmad (2011) Damage detection using self-sensing composites. Ph.D. thesis, University of Birmingham.

Mardapitta-Hadjipandeli, Lida (1986) Numerical modelling of tide-induced circulation. Ph.D. thesis, University of Birmingham.

Marigo, Michele (2012) Discrete element method modelling of complex granular motion in mixing vessels: evaluation and validation. Eng.D. thesis, University of Birmingham.

Metje, Nicole (2002) Sediment suspension under water waves. Ph.D. thesis, University of Birmingham.

Monir, Mehdi (2012) XANES study of chemistry of localised corrosion in artificial pits of 316L stainless steel and titanium. Ph.D. thesis, University of Birmingham.

Moslemi Zadeh, Sara (2013) Sustainability evaluation of shared greywater recycling in urban mixed-use regeneration areas. Ph.D. thesis, University of Birmingham.

Murphey, Shona (2011) Melting point depression in biodegradable polyesters. M.Res. thesis, University of Birmingham.

Murray, Richard Cameron (2013) An investigation into fibre spreading. M.Res. thesis, University of Birmingham.

O

Oluwasegun, Kunle Michael (2012) Microstructural characterisation of inertia friction welded RR1000 superalloy. Ph.D. thesis, University of Birmingham.

Omar, Wahid (1998) The shear assessment of concrete beams with a honeycombed zone present in the high shear region. Ph.D. thesis, University of Birmingham.

P

Park, Mun Gyu (2014) RAMS management of railway systems. Ph.D. thesis, University of Birmingham.

Perry, Howard (2013) An approach to assessing the resilience of the water service in England and Wales – Can we answer the question: is the service resilient or brittle? M.Res. thesis, University of Birmingham.

Prasad, Ashwini (2013) Application of electrostatics to align short-glass fibre bundles for composite manufacturing. M.Phil. thesis, University of Birmingham.

R

Redmore, Eleanor (2011) Surface treatment of a low-cost beta titanium alloy to combat wear. M.Res. thesis, University of Birmingham.

Reed, Kate (2013) Improving aesthetic measures for evolutionary vase design. M.Res. thesis, University of Birmingham.

Rehren, Felix Gabriel (2012) Operads and special algebras. M.Phil. thesis, University of Birmingham.

Ren, Juan (2012) An investigation of using micromachined silicon diaphragms in high temperature pressure sensors. Ph.D. thesis, University of Birmingham.

Roe, Jessie Louise (2011) Characterising natural organic matter in surface waters and the minimisation of disinfection by-product formation. Ph.D. thesis, University of Birmingham.

Roussel, Jimmy (2013) Metal behaviour in anaerobic sludge digesters supplemented with trace nutrients. Ph.D. thesis, University of Birmingham.

Rungthonkit, Prathan (2012) Structural behaviour of structural insulated panels (SIPS). Ph.D. thesis, University of Birmingham.

S

Sandells, Jamie Ian (2014) Mathematical modelling of planar solid oxide fuel cells. Ph.D. thesis, University of Birmingham.

Sato, Atsushi (2012) Nickel-based single crystal superalloys for industrial gas turbines. Ph.D. thesis, University of Birmingham.

Schennach, Friederike (2012) Oxidation of two different Pt-aluminised bond coats. Ph.D. thesis, University of Birmingham.

Schlotjes, Megan Rose (2013) The development of a diagnostic approach to predicting the probability of road pavement failure. Ph.D. thesis, University of Birmingham.

Schrӧder, Florian (2013) Modelling and Validation of Linear friction welding of Ti-6Al-4V for aeroengine application. Ph.D. thesis, University of Birmingham.

Sempewo, Jotham Ivan (2013) Transitioning of urban water distribution systems. Ph.D. thesis, University of Birmingham.

Shahjahan, Muhammad (2010) Materials considered for pavement and embankment design. M.Phil. thesis, University of Birmingham.

Sharifi, Soroosh (2009) Application of evolutionary computation to open channel flow modelling. Ph.D. thesis, University of Birmingham.

Sheridan, Richard Stuart (2014) Optimisation of HDDR processing parameters of sintered NDFEB magnets. Ph.D. thesis, University of Birmingham.

Shirgiri, Nastaran (2014) Correlation between geotechnical and geophysical properties of soil. M.Phil. thesis, University of Birmingham.

Shotton-Gale, Nicholas Edward Harry (2013) Clean filament winding: process optimisation. Ph.D. thesis, University of Birmingham.

Siavashi, Kiavash (2012) The effect of casting parameters on the fluidity and porosity of aluminium alloys in the aost foam casting process. Ph.D. thesis, University of Birmingham.

Sierros, Konstantinos A. (2006) Mechanical properties and characterisation of substrates for flexible displays. Ph.D. thesis, University of Birmingham.

Skaik, Talal (2011) Synthesis of coupled resonator circuits with multiple outputs using coupling matrix optimization. Ph.D. thesis, University of Birmingham.

Smith, Craig Anthony (2013) Production and evaluation of waste and short-fibre composites. M.Res. thesis, University of Birmingham.

Sommerville, R (2013) Utilisation of fly ash in the manufacture of useful materials. M.Res. thesis, University of Birmingham.

Stylianou, Constantina (2011) A decision support tool for road safety management in Cyprus. M.Phil. thesis, University of Birmingham.

Sukjit, Ekarong (2013) Synergistic effects of alcohol-based renewable fuels: fuel properties and emissions. Ph.D. thesis, University of Birmingham.

Sun, Hao (2014) Research on a new hybrid wind turbine system. Ph.D. thesis, University of Birmingham.

T

Tao, Tao (2013) Modelling of laser repair of single crystal nickel based superalloys. M.Phil. thesis, University of Birmingham.

Thomas, Andrew Mark (2010) Measurement of electromagnetic signal velocities in saturated fine-grained soils. Ph.D. thesis, University of Birmingham.

Tomlinson, Charlie John (2013) Incorporation of urban heat in risk assessment: a health perspective. Ph.D. thesis, University of Birmingham.

U

Umar, Abubakar Attah (2010) Design for safety framework for offshore oil and gas platforms. Ph.D. thesis, University of Birmingham.

V

Valls-Marquez, Monica (2009) Evaluating the capabilities of some constitutive models in reproducing the experimental behaviour of stiff clay subjected to tunnelling stress paths. Ph.D. thesis, University of Birmingham.

Vijayakumar, Badrinarayanan (2013) Numerical modelling of heat treatment and subsequent machining of a superalloy turbine disc: an integrated manufacturing modelling approach. Eng.D. thesis, University of Birmingham.

Vines, Joshua Edwin (2013) Nanocarbon-hydride composites for hydrogen storage. M.Res. thesis, University of Birmingham.

W

Wahab, Saiful Wazlan (2014) Assessing the condition of buried pipe using ground penetrating radar. M.Phil. thesis, University of Birmingham.

Wang, Anqi (2011) Bacterial biofilms and biomineralisation on titanium. Ph.D. thesis, University of Birmingham.

Webster, Michael Peter (2000) The assessment of corrosion-damaged concrete structures. Ph.D. thesis, University of Birmingham.

X

Xiao, Ran (2013) Fabrication and characterisation of interconnects suitable for high frequency ultrasonic array transducers. M.Res. thesis, University of Birmingham.

Y

Yilmazer, Pinar (2013) Structural health condition monitoring of rails using acoustic emission techniques. M.Res. thesis, University of Birmingham.

Z

Zhang, Fan (2013) Spray, combustion and emission characteristics of dieseline fuel. Ph.D. thesis, University of Birmingham.

Zhao, Congxiao (2014) Investigations on structural interaction of cold-formed steel roof purlin-sheet system. Ph.D. thesis, University of Birmingham.

Zuo, Rui (2012) Bistatic synthetic aperture radar using GNSS as transmitters of opportunity. Ph.D. thesis, University of Birmingham.

This list was generated on Wed Aug 20 05:22:04 2014 IST.