Items where Division is "Schools (1998 to 2008) > School of Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: | A | B | C | D | E | F | G | H | J | K | L | M | N | P | S | T | U | V | W | X | Y | Z
Number of items at this level: 76.

Jordan, Sarah Catherine (2008). An investigation of the slipstreams and wakes of trains and the associated effects on trackside people and objects. University of Birmingham. Ph.D.

A

Aiyedebinu, Adetoun Olufolake (2002). Circumvention of bottlenecks in the manufacture of influenza subunit vaccines using aqueous two-phase systems. University of Birmingham. Ph.D.

Ali, Mir Shabbar (2001). An accessibility-activity based approach for modelling rural travel demand in developing countries. University of Birmingham. Ph.D.

Anastopoulou, Stamatina (2004). Investigating multimodal interactions for the design of learning environments: a case study in science learning. University of Birmingham. Ph.D.

B

Bangyikhan, Kittiphan (2005). Effects of oxide film, Fe-rich phase, porosity and their interactions on tensile properties of cast Al-Si-Mg alloys. University of Birmingham. Ph.D.

Bayliss, Clive (1999). Application and development of finite element techniques for transducer design and analysis. University of Birmingham. Ph.D.

Bierau, Horst (2001). Process integration of cell disruption and fluidised bed adsorption of microbial enzymes: application to the retro-design of the purification of L-asparaginase. University of Birmingham. Ph.D.

Bristow, Huw William (2004). Context awareness for wearable computers. University of Birmingham. Ph.D.

Brueckner, Rene (2008). Accelerating the thaumasite form of sulfate attack and an investigation of its effects on skin friction. University of Birmingham. Ph.D.

Buckley, John Richard (2004). A study of heterogeneous nucleation and electrostatic charge in steam flows. University of Birmingham. Ph.D.

Byczynski, Glenn Edwin (2002). The strength and fatigue performance of 319 aluminum alloy castings. University of Birmingham. Ph.D.

C

Carrion Schafer, Benjamin (2003). Acceleration of the discrete element method on a reconfigurable co-processor. University of Birmingham. Ph.D.

Ch'ng, Eugene (2007). Developing artificial life simulations of vegetation to support the virtual reconstruction of ancient landscapes. University of Birmingham. Ph.D.

Chang, Wei-Chin (2002). An improved method of investigation of combustion parameters in a natural gas fuelled SI engine with EGR and H2 as additives. University of Birmingham. Ph.D.

Chiti, Fabio (2008). Lagrangian studies of turbulent mixing in a vessel agitated by a rushron turbine: positron emission particle tracking (PEPT) and computational fluid dynamics (CFD). University of Birmingham. Ph.D.

Cronjé, Angela Leigh (2004). Ammonia emissions and pathogen inactivation during controlled composting of pig manure. University of Birmingham. Ph.D.

D

Di Meglio, Alberto (2000). Finite element-boundary elements modelling of acoustic scattering from viscoelastic anechoic structures. University of Birmingham. Ph.D.

Dikwal, Chinnan Maclean (2009). Cycling studies of micro-tubular solid oxide fuel cells. University of Birmingham. Ph.D.

Dispinar, Derya (2006). Determination of metal quality of aluminium and its alloys. University of Birmingham. Ph.D.

E

Elding, Darren James (2005). Modelling employee motivation and performance. University of Birmingham. Ph.D.

Erwood, Nicholas James (2002). How non residential burglaries are solved: the effectiveness of police operations. University of Birmingham. Ph.D.

F

Fan, Bo (2012). Railway traffic rescheduling approaches to minimise delays in disturbed conditions. University of Birmingham. Ph.D.

Ferraro, Gianluca ORCID: 0000-0003-0470-6775 (2021). Understanding the stability and properties of bulk nanobubbles. University of Birmingham. Ph.D.

Fisher, Matthew (2001). Point-based mathematics for computer-aided manufacture. University of Birmingham. Ph.D.

Foo, Kae Yeet (2004). Incoherent processing of synthetic aperture sonar. University of Birmingham. Ph.D.

Freear, Nicholas David (2002). Automated visual inspection for the quality control of pad printing. University of Birmingham. Ph.D.

Fuchs, Alexander (2005). Application of microstructural texture parameters to diffusional and displacive transformation products. University of Birmingham. Ph.D.

G

Ghosh, Sukanta (2008). Effect of stress on initiation and propagation of localized corrosion in alumninium alloys. University of Birmingham. Ph.D.

Gong, Guobin (2008). DEM [Discrete Element Method] simulations of drained and undrained behaviour. University of Birmingham. Ph.D.

Grant, Joanne Louise (2010). Palladium, yttrium, copper ternary alloys for hydrogen purification. University of Birmingham. M.Res.

H

Hollier, Gary Phillip (2000). Two-sample ellipsoidal bounding in the context of parameter estimation. University of Birmingham. Ph.D.

Humphreys, Alan Owen (1998). The low temperature fracture behaviour of the super duplex stainless steel Zeron 100. University of Birmingham. Ph.D.

J

Jia, Chunjiang (2008). Experimental investigation of semiconductor losses in cryogenic DC-DC converters. University of Birmingham. Ph.D.

John, Arwyn (1998). A novel reactor with two independently-driven impellers for gas-liquid processing. University of Birmingham. Ph.D.

Jonglertjunya, Woranart (2003). Bioleaching of chalcopyrite. University of Birmingham. Ph.D.

K

Kalialakis, Christos (1999). Finite difference time domain analysis of microstrip antenna-circuit modules. University of Birmingham. Ph.D.

Kimber, David Paul (2006). Class E amplifiers and their modulation behaviour. University of Birmingham. Ph.D.

Kong , Yi (2003). Structure and property relationships in PET blends. University of Birmingham. Ph.D.

Koohpayeh, Seyed Mojtaba (2007). Crystal growth of functional oxides using an image furnace. University of Birmingham. Ph.D.

Kulworawanichpong, Thanatchai (2004). Optimising AC electric railway power flows with power electronic control. University of Birmingham. Ph.D.

L

Llamas Garro, Ignacio (2003). Micromachined microwave filters. University of Birmingham. Ph.D.

Lockyer, Peter Stephen (2007). Controlling the interpolation of NURBS curves and surfaces. University of Birmingham. Ph.D.

M

Mansa, Rachel Fran (2007). Roll compaction of pharmaceutical excipients and prediction using intelligent software. University of Birmingham. Ph.D.

Marigo, Michele (2012). Discrete element method modelling of complex granular motion in mixing vessels: evaluation and validation. University of Birmingham. Eng.D.

Marland, Stephen Alan (2001). Microwave beneficiation of coal to improve grindability and handleability. University of Birmingham. Ph.D.

McMitchell, Sean Robert Craig (2008). An investigation into controlling the growth modes of ferroelectric thin films using pulsed laser deposition and RHEED. University of Birmingham. Ph.D.

Melnikoff, Stephen Jonathan (2003). Speech recognition in programmable logic. University of Birmingham. Ph.D.

Metje, Nicole (2002). Sediment suspension under water waves. University of Birmingham. Ph.D.

Morison, Christopher Neil (2002). The dynamics of shaken baby syndrome. University of Birmingham. Ph.D.

N

Namahoot, Jutatip (2005). Effects of deformations on corrosion of Al-Mn alloys. University of Birmingham. Ph.D.

Nguyen, Van Bac (2006). Numerical modelling of reinforced concrete bridge pier under artificially generated earthquake time-histories. University of Birmingham. Ph.D.

Nobre, Farley S. M. (2005). On cognitive machines in organisations. University of Birmingham. Ph.D.

Nobre, Farley Simon Mendes (2005). On cognitive machines in organizations. University of Birmingham. Ph.D.

P

Paloumpi, Athanasia (2010). Nanoscale magnesium as a hydrogen storage material. University of Birmingham. M.Res.

Papaelias, Mayorkinos PH. (2004). Detection and measurement of phase transformation in steel using electromagnetic sensors. University of Birmingham. Ph.D.

Pezeshki, Peyman (2003). Use of cell cycle analysis in early state estimation and process control. University of Birmingham. M.Phil.

Phillips, Jeremy Charles (1998). Agricultural spray droplet dispersion in turbulent windflow. University of Birmingham. Ph.D.

Preece, John Christopher (2006). Oxygenated hydrocarbon fuels for solid oxide fuel cells. University of Birmingham. Ph.D.

S

Slinn, Matthew (2008). Improvements to the biodiesel process. University of Birmingham. Eng.D.

Smith, Simon Graham Jeremy (2003). Predicting query types by prosodic analysis. University of Birmingham. Ph.D.

Syddall, Mark Timothy (1999). Improving the identification of a penicillin fermentation model. University of Birmingham. Ph.D.

T

Tey, Joo Guan Martin (2003). A generic model of organisational change towards world class manufacturing. University of Birmingham. Ph.D.

Tucker, Gary (2008). Development and application of time-temperature integrators to thermal food processing. University of Birmingham. Ph.D.

U

Ueda, Naoki (2005). Metro traffic optimisation accounting for the disbenefit of halting between stations. University of Birmingham. Ph.D.

Ulicsak, Mary Helen (2003). Working together in the classroom : an investigation into software to raise awareness of group-learning skills in children aged 9 and 10. University of Birmingham. Ph.D.

V

Verdejo, Raquel (2004). Gas loss and durability of EVA foams used in running shoes. University of Birmingham. Ph.D.

Vorster, Werner (2001). The effect of microwave radiation on mineral processing. University of Birmingham. Ph.D.

W

Wang, Yi (2005). Superconducting coplanar delay lines. University of Birmingham. Ph.D.

Warnock, James Neill (2003). Optimisation of retroviral production systems for gene therapy applications. University of Birmingham. Ph.D.

Webster, Michael Peter (2000). The assessment of corrosion-damaged concrete structures. University of Birmingham. Ph.D.

Wong, Seck Hoe (2004). Interactions of micromachines and the fluid environment: rapid mixing in micromixers. University of Birmingham. Ph.D.

X

Xu, Ming (2001). Robust and flexible multi-scale medial axis computation. University of Birmingham. Ph.D.

Y

Yang, Shaoyong (2005). Cryogenic characteristics of IGBTs. University of Birmingham. Ph.D.

Yang, Zhufang (2002). Multiple-model tracking with fixed-lag smoothing using imprecise information. University of Birmingham. Ph.D.

Z

Zhang, Bo (2005). Development of corrosion resistant galvanising alloys. University of Birmingham. Ph.D.

Zhang, Laiqi (1998). Selective hydrogenation of α,β[alpha,beta]-unsaturated aldehydes towards clean synthesis over noble metal catalysts in mass transfer efficient three phase reactors. University of Birmingham. Ph.D.

This list was generated on Tue Mar 19 07:50:54 2024 GMT.