Development of the detector control system for the ATLAS Level-1 trigger and measurement of the single top production cross section

Curtis, Christopher J (2010). Development of the detector control system for the ATLAS Level-1 trigger and measurement of the single top production cross section. University of Birmingham. Ph.D.

[img]
Preview
Curtis10PhD.pdf
PDF

Download (2MB)

Abstract

This thesis discusses the development of the Detector Control System (DCS) for the ATLAS Level-1 Trigger. Microcontroller code has been developed to read out slow controls data from the Level-1 Calorimeter Trigger modules into the wider DCS. Back-end software has been developed for archiving this data. A Finite State Machine (FSM) has also been developed to offer remote access to the L1 Trigger hardware from the ATLAS Control Room. This Thesis also discusses the discovery potential for electroweak single top production during early running. Using Monte Carlo data some of the major systematics are discussed. A potential upper limit on the production cross section is calculated to be 45.2 pb. If the Standard Model prediction is assumed, a measured signal could potentially have a significance of up to 2.23¾ using 200 pb−1 of data.

Type of Work: Thesis (Doctorates > Ph.D.)
Award Type: Doctorates > Ph.D.
Supervisor(s):
Supervisor(s)EmailORCID
Watkins, PeterUNSPECIFIEDUNSPECIFIED
Licence:
College/Faculty: Colleges (2008 onwards) > College of Engineering & Physical Sciences
School or Department: School of Physics and Astronomy
Funders: Science and Technology Facilities Council
Subjects: Q Science > QC Physics
URI: http://etheses.bham.ac.uk/id/eprint/684

Actions

Request a Correction Request a Correction
View Item View Item

Downloads

Downloads per month over past year