Roll compaction of pharmaceutical excipients and prediction using intelligent software

Mansa, Rachel Fran (2007). Roll compaction of pharmaceutical excipients and prediction using intelligent software. University of Birmingham. Ph.D.

[img]
Preview
Mansa07PhD.pdf
PDF - Accepted Version

Download (3MB)

Abstract

Roll compaction is a dry granulation method. In the pharmaceutical industry it assists in binding tablet ingredients together to form a larger mass. This is conducted to ease subsequent processing, decrease dust, improve flowability, improve material distribution, more suitable for moisture and heat sensitive materials than wet granulation methods, minimises operating space and suited for a continuous manufacturing set-up. In pharmaceutical roll compaction various types of powder material mixtures are compacted into ribbon that are subsequently milled and tableted. The aim of this research is to investigate the use of intelligent software (FormRules and INForm software) for predicting the effects of the roll compaction process and formulation characteristics on final ribbon quality. Firstly, the tablet formulations were characterised in terms of their particle size distribution, densities, compressibility, compactibility, effective angle of friction and angle of wall friction. These tablet formulations were then roll compacted. The tablet formulation characteristics and roll compaction results formed 64 datasets, which were then used in FormRules and INForm software training. FormRules software highlighted the key input variables (i.e. tablet formulations, characteristics and roll compaction process parameters). Next these key input variables were used as input variables in the model development training of INForm. The INForm software produced models which were successful in predicting experimental results. The predicted nip angle values of the INForm models were found to be within 5%, which was more accurate to those derived from Johanson’s model prediction. The Johanson’s model was not successful in predicting nip angle above the roll speed of 1 rpm due to air entrainment. It also over-predicted the experimental nip angle of DCPA and MCC by 200%, while the approximation using Johanson’s pressure profile under-predicted the experimental nip angle of DCPA by 5-20% and MCC by 20%.

Type of Work: Thesis (Doctorates > Ph.D.)
Award Type: Doctorates > Ph.D.
Supervisor(s):
Supervisor(s)EmailORCID
Seville, J. P. K. (Jonathan P. K.)UNSPECIFIEDUNSPECIFIED
Bridson, Rachel HUNSPECIFIEDUNSPECIFIED
Greenwood, RichardUNSPECIFIEDUNSPECIFIED
Licence:
College/Faculty: Schools (1998 to 2008) > School of Engineering
School or Department: School of Chemical Engineering
Funders: None/not applicable
Subjects: T Technology > TP Chemical technology
URI: http://etheses.bham.ac.uk/id/eprint/5406

Actions

Request a Correction Request a Correction
View Item View Item

Downloads

Downloads per month over past year