Matched load for WR03 waveguides

Downloads

Downloads per month over past year

Roshanmanesh, Sanaz (2015). Matched load for WR03 waveguides. University of Birmingham. M.Sc.

[img]
Preview
Roshanmanesh15MScbyRes.pdf
PDF - Accepted Version

Download (3MB)

Abstract

In this research, a design and simulation of a waveguide termination for WR03 band, using SU8 based micromachined waveguides is reported. To achieve low level reflection for the termination, two basic ideas are considered. Firstly, an open-ended waveguide port inside the lossy material of SU8 has been investigated. Secondly, thin film conductor layers (silver and platinum) are considered for waveguide walls. Additionally, for the improvement of the final result, different kinds of tapering of the SU8 open-ended waveguide have been analysed. Horn shaping of the waveguide structure in combination with tapering of SU8 has also been evaluated. The best structure was WR03 Platinum termination with height tapering with a predicted return loss of better than -30 dB over the WR03 band.

Type of Work: Thesis (Masters by Research > M.Sc.)
Award Type: Masters by Research > M.Sc.
Supervisor(s):
Supervisor(s)EmailORCID
Lancaster, M.J.UNSPECIFIEDUNSPECIFIED
Licence:
College/Faculty: Colleges (2008 onwards) > College of Engineering & Physical Sciences
School or Department: School of Engineering, Department of Electronic, Electrical and Systems Engineering
Funders: None/not applicable
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
URI: http://etheses.bham.ac.uk/id/eprint/6056

Actions

Request a Correction Request a Correction
View Item View Item

Downloads

Downloads per month over past year