Control oriented engine modelling and engine multi-objective optimal feedback control

Ma, He (2013). Control oriented engine modelling and engine multi-objective optimal feedback control. University of Birmingham. Ph.D.

[img]
Preview
Ma13PhD.pdf
PDF - Accepted Version

Download (13MB)

Abstract

With increasing number of degrees of freedom for engine operations, traditional mapping based engine calibration methods are reaching their limits. To take their place, automated, multi-objective engine optimisation approaches are desirable. In this thesis, the author presents a model-based multi-objective engine optimisation algorithm using the Strength Pareto Evolutionary Algorithm (SPEA2). The author demonstrates the performance of his approach using a model of a Homogenous Charge Compression Ignition (HCCI) and Spark Ignition (SI) engine. The HCCI combustion model has been developed based on the Apparent Fuel Burning Rate formulations (AFBR) method. The model has been validated from 1500 rpm to 2250 rpm with different engine loads.

For the experiments reported here, the calibration objective is the optimisation of valve timing (IVO, EVC) and λ with respect to indicated specific fuel consumption (ISFC) and indicated specific hydrocarbon (ISHC) for HCCI cases, and optimise throttle position, spark timing, injection timing, IVO and EVC for ISHC, ISPMM and ISPMN for SI cases, while achieving a predefined power output at a given engine speed. The method is able to find optimal engine parameters with good accuracy and calculation speed.

The initial model calibration requires 90 and 108 engine test bed experiments for SI and HCCI cases respectively, after that the run time for any set of operating conditions is around 3hours and 20mins.

Type of Work: Thesis (Doctorates > Ph.D.)
Award Type: Doctorates > Ph.D.
Supervisor(s):
Supervisor(s)EmailORCID
Xu, HongmingUNSPECIFIEDUNSPECIFIED
Olatunbosun, O. A.UNSPECIFIEDUNSPECIFIED
Licence:
College/Faculty: Colleges (2008 onwards) > College of Engineering & Physical Sciences
School or Department: School of Engineering, Department of Mechanical Engineering
Funders: Other, Engineering and Physical Sciences Research Council
Other Funders: Advantage West Midlands
Subjects: T Technology > TJ Mechanical engineering and machinery
URI: http://etheses.bham.ac.uk/id/eprint/4308

Actions

Request a Correction Request a Correction
View Item View Item

Downloads

Downloads per month over past year