Powder build-up in detergent packing lines

Hewitt, Christopher David (2016). Powder build-up in detergent packing lines. University of Birmingham. Eng.D.

[img]
Preview
Hewitt16EngD.pdf
PDF - Accepted Version

Download (8MB)

Abstract

Build-up is a fouling process in which a small fraction of a powder becomes a film adhered to a surface. Specifically buildup in auger fillers which is the focus of this thesis is a significant problem for industry leading to equipment downtime for cleaning, drives tripping due to high torque and reduced powder quality.
The work presented in this thesis shows that for a unblended powder with a particle size similar to that of the auger fillers auger/tube clearance, build-up will be formed when powders have b-1 Kawakita parameter of less than 0.5 MPa and tablet strengths below 0.6 MPa post compression to 58 MPa.
It is proposed based upon results the work of Crutchley and Bridgewater [29] and Calvert et al. [30] that powders which form build-up due so due to the stresses they experience as they pass through the auger/tube clearance. Additionally this stress is a function of the ratio of the powder’s particle size to the magnitude of the auger/tube clearance C. Work presented in Chapter 8 supports this conclusion showing that once C/D90 is greater than 3.5, build-up is not formed.

Type of Work: Thesis (Doctorates > Eng.D.)
Award Type: Doctorates > Eng.D.
Supervisor(s):
Supervisor(s)EmailORCID
Ingram, AndyUNSPECIFIEDUNSPECIFIED
Smith, DavidUNSPECIFIEDUNSPECIFIED
Licence:
College/Faculty: Colleges (2008 onwards) > College of Engineering & Physical Sciences
School or Department: School of Chemical Engineering
Funders: None/not applicable
Subjects: T Technology > TP Chemical technology
URI: http://etheses.bham.ac.uk/id/eprint/6851

Actions

Request a Correction Request a Correction
View Item View Item

Downloads

Downloads per month over past year