Structural analysis and design of cold formed steel sigma purlins

Liu, Qiang (2012). Structural analysis and design of cold formed steel sigma purlins. University of Birmingham. Ph.D.

Preview

Liu12PhD.pdf
PDF - Accepted Version
Download (4MB)

Abstract

Cold formed steel (CFS) sigma sections are commonly used as purlins in the construction of modern industrial and residential buildings due to their excellent strength-to-weight ratio. This thesis reports investigations on the structural behaviour of CFS sigma purlins in three different parts of modern roof systems. In the first investigation, the pre-buckling, buckling, post-buckling and post-failure behaviour of continuous CFS sigma purlins near internal supports was studied by experimental and numerical methods. In the second investigation, the moment-rotation response as well as the moment resistance of the sleeve connection of sigma purlins was studied by laboratory tests. Engineering models were developed to predict the behaviour of this connection and a good correlation was observed with the experimental data. In the third investigation, the flexural stiffness and moment resistance of CFS sigma purlins fastened to roof sheeting with large screw spacing was studied experimentally. The purlin-sheeting assemblies were subjected to both downward and uplift loadings, from which different behavioural aspects such as flexural stiffness, failure modes and ultimate load were examined. Test results are utilized to develop design proposals for sigma purlins that codes or standards have not yet covered.

Type of Work:

Thesis (Doctorates > Ph.D.)

Award Type:

Doctorates > Ph.D.

Supervisor(s):