Leadley, Craig Edward (2012). Understanding the effects of high-pressure, high-temperature processing on the key quality parameters of green beans (Phaseolus vulgaris) with a view to assessing the potential quality benefits of the approach relative to conventional thermal processing. University of Birmingham. Ph.D.
|
Leadley12PhD.pdf
Download (2MB) |
Abstract
Studies were conducted to explore whether high pressure (up to 700 MPa) could be used in combination with elevated temperatures (up to 90°C initial temperature) to produce ambient stable green beans (Phaseolus vulgaris) with improved quality compared with conventionally heat processed samples. Colour changes, texture change and chlorophyll retention were explored at a range of pressures, temperatures and times using a surface response methodology. Texture changes were essentially related to temperature effects; higher temperatures resulted in a greater loss in texture. Significant improvements in texture retention were possible using High Pressure Sterilisation (HPS) but sample colour was negatively affected. Colour parameters were predicted primarily by time and pressure so deterioration in green vegetable quality for a commercially sterile products appears inevitable when using HPS. The use of ohmic heating as a pre-heating method greatly reduced cook values (T\(_{ref}\) = 100°C, z = 39C°) for colour degradation (down to 0.24, 0.12, 0.35 from 3.02, 2.50, 3.70 minutes for ohmically heating and water bath heated samples respectively) which yielded significant benefits in terms of colour retention of raw materials at the start of the HPS cycle; values of a* and b* for ohmically pre-heated samples were close to that of blanched beans.
Type of Work: | Thesis (Doctorates > Ph.D.) | ||||||
---|---|---|---|---|---|---|---|
Award Type: | Doctorates > Ph.D. | ||||||
Supervisor(s): |
|
||||||
Licence: | |||||||
College/Faculty: | Colleges (2008 onwards) > College of Engineering & Physical Sciences | ||||||
School or Department: | School of Chemical Engineering | ||||||
Funders: | None/not applicable | ||||||
Subjects: | Q Science > QD Chemistry T Technology > TP Chemical technology T Technology > TS Manufactures |
||||||
URI: | http://etheses.bham.ac.uk/id/eprint/3333 |
Actions
Request a Correction | |
View Item |
Downloads
Downloads per month over past year